Digital Video Forums  

Go Back   Digital Video Forums > Software Forums > ImgBurn

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 31 Mar 2009, 06:34 AM   #1
New Member
New Member
 
Join Date: Mar 2009
Posts: 1
Default [HELP] Can't Burn Xbox 360 Backups Anymore

Hey guys! Firstly, my problem contains several different catagories, and it didn't fit into any one forum, so that's why I'm posting here. Mods, feel free to move this if you think it fits better somewhere else.

Ok, here's my sad story: I've been making Xbox 360 backups for a long time and I thought that I was fairly familiar with the process. I had a Samsung DVD burner that I was using and it burned out. So I replaced it with a Liteon DVD burner. Everything worked fine. Then I decided that it was time to replace my motherboard and processor. Now I get errors when I try to burn Xbox 360 backups with Imgburn and CloneCD. Here's what I'm working with:

Liteon DVD burner (set to DVD-ROM for DVD-DL)
-Connected through IDE (set as Master)

I also have a new HP multi media burner that gives me the exact same error:

HP DVD Burner (set to DVD-ROM for DVD-DL)
-Connected through IDE (set as Slave)

Here's the log that I get from Imgburn when I try to make a backup:

I 14:00:09 ImgBurn Version 2.4.2.0 started!
I 14:00:09 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 14:00:09 Total Physical Memory: 2,619,628 KB - Available: 2,225,236 KB
I 14:00:09 Initialising SPTI...
I 14:00:09 Searching for SCSI / ATAPI devices...
I 14:00:09 Found 1 DVD-ROM and 2 DVD▒RW/RAMs!
I 14:00:22 Operation Started!
I 14:00:22 Source File: C:\Documents and Settings\Josh\Desktop\Xbox 360 Games\Nascar 09\Nascar09.dvd
I 14:00:22 Source File Sectors: 3,825,924 (MODE1/2048)
I 14:00:22 Source File Size: 7,835,492,352 bytes
I 14:00:22 Source File Volume Identifier: XGD2DVD_NTSC
I 14:00:22 Source File Volume Set Identifier: 34672923
I 14:00:22 Source File Implementation Identifier: Sonic Scenarist 3.1
I 14:00:22 Source File File System(s): ISO9660, UDF (1.02)
I 14:00:22 Destination Device: [4:1:0] HP DVD Writer 1140i YH25 (E (RAID)
I 14:00:22 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)
I 14:00:22 Destination Media Sectors: 4,173,824
I 14:00:22 Write Mode: DVD
I 14:00:22 Write Type: DAO
I 14:00:22 Write Speed: 2.4x
I 14:00:22 Link Size: Auto
I 14:00:22 Test Mode: No
I 14:00:22 OPC: No
I 14:00:22 BURN-Proof: Enabled
I 14:00:22 User Specified L0 Data Zone Capacity: 1,913,760
W 14:00:53 Failed to set L0 Data Zone Capacity!
W 14:00:53 Reason: Power On, Reset, or Bus Device Reset Occurred
I 14:00:54 Filling Buffer... (40 MB)
I 14:00:54 Writing LeadIn...
W 14:00:57 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error
W 14:00:57 Retrying (1 of 20)...
I 14:00:57 Abort Request Acknowledged


I'm not sure what else to try. The HP writer is brand new, so it's not the burner. I get the exact same error with both burners. I'm using Verbatim 2.4x DL DVD's, so that's not the problem. I changed the Ribbon Cable, so that's not the problem. So I'm thinking that it has to be programming based. Someone in another posing suggested that it might have something to do with the IDE controller, but I don't know anything about that. So maybe it's the drivers, maybe it's the firmware. I don't really know. I wouldn't think that it's the firmware because the drive worked prior to the new motherboard.

Oh, and just a quick note: Both drives burn Wii Backups with no problem (so single layer disks still burn fine). I don't know what I need to tweak. Please Help!!!

Last edited by blutach; 31 Mar 2009 at 08:45 AM Reason: Removed insidious Afterdawn links to everything
Jbbrack03 is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cannot burn anymore manutau DVD Blank Media, Burning, Recording Hardware 15 23 Nov 2006 08:25 AM
Could burn:) Not anymore. :( Can anyone help? DH808 DVD Blank Media, Burning, Recording Hardware 0 3 Aug 2005 03:27 AM
can't burn anymore?please help jammiev DVD Blank Media, Burning, Recording Hardware 3 4 Jul 2005 04:01 AM



All times are GMT +10. The time now is 10:13 AM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2018 Digital Digest

Visit DivXLand   Visit dvdloc8.com