Digital Video Forums  

Go Back   Digital Video Forums > Software Forums > ImgBurn

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 14 Apr 2007, 05:59 AM   #1
Junior Member
Junior Member
 
Join Date: Oct 2003
Posts: 39
Default Error burning with IMG on DL

I was trying to copy a disc I own of an old classic and I used FabDecrypt to rip the whole disc. I then used Shrink, but realized I needed to burn a DL b/c the file was too big to shrink efffectively (55%). I then used PGCedit and was going to burn with IMG burn to a DL, but it came up with an error on IMG about 1/3 done. The error was an I/O error which I had to abort.
Need some help. any suggestions.
buytick is offline   Reply With Quote
Old 14 Apr 2007, 06:01 AM   #2
Who Farted?
 
locoeng's Avatar
 
Join Date: Dec 2005
Location: behind you
Posts: 2,509
Default

A log would prove useful in this case.

What brand discs are you using?
Firmware current for burner?
What did the error say in its entirety?
__________________


"I refuse to have a battle of wits with an unarmed person. It's not fair to you and no challenge for us."
Walt Kelly
locoeng is offline   Reply With Quote
Old 14 Apr 2007, 07:27 AM   #3
Just Trying To Help
 
soup's Avatar
 
Join Date: Nov 2005
Location: Canada Region 1
Posts: 7,524
Default

Quote:
the file was too big to shrink efffectively (55%)
As long as everything is in order & you are using good media, you should have no problem with 55%. I have done lots of episodic dvd's at that compression & had no problems. I would suggest Maximum Smooth for anything less than 65% in Quality Settings. As for your DL, your problem probably stems from the fact that you opened DvdFab Decrypter's output in Dvd Shrink. Dvd Shrink should never be involved in DL. If this is an old classic, I would suggest using Dvd Decrypter (ISO Read) then use ImgBurn to burn that output.
__________________

soup is offline   Reply With Quote
Old 14 Apr 2007, 08:07 AM   #4
Junior Member
Junior Member
 
Join Date: Oct 2003
Posts: 39
Default

This my PGCedit log:

mkisofs log for DVD "TALE_OF_TWO_CITIES"
From: "C:\Documents and Settings\Owner\Desktop\tale\MainMovie\TALE OF TWO CITIES"
DVD-TEXT General Name: ""
Provider ID: ""
Number of VTS: 1
Output file: "C:\TALE_OF_TWO_CITIES.ISO"
Volume label: "TALE_OF_TWO_CITIES"
Running under windows (OS type: Windows NT)

mkisofs 2.01 X (i686-pc-cygwin)
Layer break is at absolute sector 1952512. (Offset in L0 is 800215.)
Layer break cell:
1152297: VTST 1 , 1 TTN 1 (2:05:56) Title 1 Cell 13 (00:02:23.00), V/CID: 2/1 high mux rate

The pad was 800231 for file VIDEO_TS.IFO
Total translation table size: 0
Total rockridge attributes bytes: 0
Total directory bytes: 4248
Path table size(bytes): 42
Max brk space used 5000
3905014 extents written (7626 MB)

ISO created OK.

Here is my IMG Burn log.

ImgBurn Version 2.3.0.0 - Log
; Friday, 13 April 2007, 14:50:17
; \\****************************************//
;
;
I 14:30:06 ImgBurn Version 2.3.0.0 started!
I 14:30:06 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 14:30:06 Total Physical Memory: 522,736 KB - Available: 155,084 KB
I 14:30:06 Initialising SPTI...
I 14:30:06 Searching for SCSI / ATAPI devices...
I 14:30:06 Found 1 DVD+RW and 1 DVD▒RW!
I 14:30:06 Operation Started!
I 14:30:06 Source File: C:\TALE_OF_TWO_CITIES.ISO
I 14:30:06 Source File Sectors: 3,932,503 (MODE1/2048)
I 14:30:06 Source File Size: 8,053,766,144 bytes
I 14:30:06 Source File Volume Identifier: TALE_OF_TWO_CITIES
I 14:30:06 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
I 14:30:06 Source File Implementation Identifier: mkisofs
I 14:30:06 Source File File System(s): ISO9660, UDF (1.02)
I 14:30:06 Destination Device: [1:0:0] BENQ DVD LS DW1655 BCDB (D (ATA)
I 14:30:06 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)
I 14:30:06 Destination Media Sectors: 4,173,824
I 14:30:06 Write Mode: DVD
I 14:30:06 Write Type: DAO
I 14:30:06 Write Speed: 2.4x
I 14:30:06 Link Size: Auto
I 14:30:06 Test Mode: No
I 14:30:06 BURN-Proof: Enabled
I 14:30:06 User Specified L0 Data Zone Capacity: 2,011,632
I 14:30:07 Filling Buffer... (20 MB)
I 14:30:10 Writing LeadIn...
I 14:30:41 Writing Image... (LBA: 0 - 3932502)
I 14:30:41 Writing Layer 0... (LBA: 0 - 2011631)
W 14:47:23 Failed to Write Sectors 1571104 - 1571135 - Write Error
W 14:47:23 Retrying (1 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (2 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (3 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (4 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (5 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (6 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (7 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (8 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (9 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (10 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (11 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (12 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (13 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (14 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (15 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (16 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (17 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (18 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (19 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
W 14:47:23 Retrying (20 of 20)...
W 14:47:23 Retry Failed - Invalid Address For Write
E 14:47:50 Failed to Write Sectors 1571104 - 1571135 - Write Error
I 14:47:50 Synchronising Cache...
I 14:47:51 Closing Track...
I 14:47:53 Finalising Disc...
W 14:50:07 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Write Error
E 14:50:15 Finalise Disc Failed! - Reason: Write Error
I 14:50:15 Finalising Disc (Last Attempt!)...
E 14:50:15 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session
E 14:50:15 Failed to Write Image!
E 14:50:15 Operation Failed! - Duration: 00:20:08
I 14:50:15 Average Write Rate: 3,053 KB/s (2.2x) - Maximum Write Rate: 3,439 KB/s (2.5x)
I 14:50:17 Close Request Acknowledged
I 14:50:17 Closing Down...
I 14:50:17 Shutting down SPTI...
I 14:50:17 ImgBurn closed!
buytick is offline   Reply With Quote
Old 14 Apr 2007, 08:11 AM   #5
Junior Member
Junior Member
 
Join Date: Oct 2003
Posts: 39
Default

Thank you Soup.
I don't like to reduce that much b/c I watch the DVD's on an HD TV. So you say use DVD Decrypter then IMGBurn, but how will the layer break be done without PGC edit?
buytick is offline   Reply With Quote
Old 14 Apr 2007, 08:44 AM   #6
Who Farted?
 
locoeng's Avatar
 
Join Date: Dec 2005
Location: behind you
Posts: 2,509
Default

Quote:
BENQ DVD LS DW1655 BCDB
Quote:
DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)
There is a firmware update available, but I doubt if it will cure your woes....I've used that same combo (drive, firmware and media) before with no problems.

http://tdb.rpc1.org/#DW1655

Actually I think it was the BDGB that I was using...anywho, you want BCIB.

Does the disc play?
locoeng is offline   Reply With Quote
Old 14 Apr 2007, 09:47 AM   #7
Just Trying To Help
 
soup's Avatar
 
Join Date: Nov 2005
Location: Canada Region 1
Posts: 7,524
Default

I watch my dvd's on a 32" Samsung LCD. Try one if you don't like it, what has it cost? A little bit of time & 30 to 50 cents. Remember at that compression it will take a while to analyze & encode.

I am sorry, I forgot about your question on ISO read with Dvd Decrypter. Now this is only for older movies. When you do an ISO read with Dvd Decrypter, it creates two files, ISO & MDS. In ImgBurn when you browse to the file you want to burn, you choose the MDS file which contains the layer break info, not forgetting to booktype for Dvd+R DL Media & burn @ 2.4.

Last edited by soup; 14 Apr 2007 at 10:08 AM
soup is offline   Reply With Quote
Old 14 Apr 2007, 11:37 PM   #8
Junior Member
Junior Member
 
Join Date: Oct 2003
Posts: 39
Default

locoeng
thanks. i updated my firmware. i'm still not sure why that happened. is there another process for burining my dual layers? fab-shrink-pgcedit-imgburn
buytick is offline   Reply With Quote
Old 15 Apr 2007, 01:38 AM   #9
Who Farted?
 
locoeng's Avatar
 
Join Date: Dec 2005
Location: behind you
Posts: 2,509
Default

Why are you using PgcEdit...removing unwanted stuff? In build mode Imgburn will take your VIDEO_TS folder and create a double layer ISO and set it's own layer break for you.
locoeng is offline   Reply With Quote
Old 15 Apr 2007, 03:55 AM   #10
Junior Member
Junior Member
 
Join Date: Oct 2003
Posts: 39
Default

How does IMG know to make a DL dvd? SO all I have to do is Fab, Shrink (if I want to remove stuff) and burn with IMG?
buytick is offline   Reply With Quote
Old 15 Apr 2007, 06:17 AM   #11
Who Farted?
 
locoeng's Avatar
 
Join Date: Dec 2005
Location: behind you
Posts: 2,509
Default

Here are a few guides for you...they are really simple.

Burning on the fly from VIDEO_TS folderhttp://forum.imgburn.com/index.php?showtopic=1780

Creating a DL ISO with Imgburnhttp://forum.imgburn.com/index.php?showtopic=1777
locoeng is offline   Reply With Quote
Old 15 Apr 2007, 09:55 AM   #12
Not a god of digital video
 
blutach's Avatar
 
Join Date: Oct 2004
Location: is everything!
Posts: 24,628
Default

@locoeng - the ISO is fine. The burn is bad.

Hope the updated firmware helps.

Regards
__________________
Les

Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
[What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

Explore the sites and the programs - there's a gold mine of information in them

Don't forget to play the Digital Digest Quiz!!! (Click here)

blutach is offline   Reply With Quote
Old 15 Apr 2007, 10:07 AM   #13
Who Farted?
 
locoeng's Avatar
 
Join Date: Dec 2005
Location: behind you
Posts: 2,509
Default

I was just trying to eliminate a step if not needed.
locoeng is offline   Reply With Quote
Old 15 Apr 2007, 10:55 AM   #14
Junior Member
Junior Member
 
Join Date: Oct 2003
Posts: 39
Default

I already made 3 DL coasters trying to burn. I hope the firmware will do the trick. I thought the ISO was OK and couldn't understand why IMG wouldn't burn it. IMG used to burn all my DL's without a problem. But it also happened with another old classic recently, so maybe it was the firmware.
Thanks for all your help.
buytick is offline   Reply With Quote
Old 15 Apr 2007, 11:00 AM   #15
Not a god of digital video
 
blutach's Avatar
 
Join Date: Oct 2004
Location: is everything!
Posts: 24,628
Default

It started to burn it and didn't like what it saw about 2/3 of the way thru layer 0. Try that new firmware, failing which a lens cleaner might do the trick.

Make sure DMA is on.

Regards
blutach is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
burning error - power calibration area error pbakes13 DVD Blank Media, Burning, Recording Hardware 2 6 Jul 2005 12:39 PM
DVD burning Error - Unspecified target error FruitLoop DVD Blank Media, Burning, Recording Hardware 19 12 Apr 2005 08:59 AM



All times are GMT +10. The time now is 05:13 PM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2018 Digital Digest

Visit DivXLand   Visit dvdloc8.com