Digital Video Forums  

Go Back   Digital Video Forums > Software Forums > ImgBurn

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 30 Mar 2007, 01:22 AM   #1
PI8
Guest
 
Posts: n/a
Default Failed to Verify Sectors

Hi all!
I am trying to backup several DVDs. The burning process with Imgburn (version 2.3) goes fine but the verification (verify against image) fails.
I used DVDDecrypter and ripped all files to my HDD, then I opened DVDShrink and created an ISO.
I can burn the same image without any problems with my second drive, LG 4163B. I had no verification errors and I used the same media type: verbatim DVD+R Lightscribe.
I also tried Philips DVD-R and Verbatim DVD-R, but had no success.
After the burning process has finished you can see a dark ring in the middle of the disc and there are freezings and pixeling during playback.

Here are some infos about my drive and the disc:
I have the latest version of Firmware (1.02)
write speed = 4X

HL-DT-ST DVDRRW GSA-4166B 1.02 (ATA)
Current Profile: DVD+R

Disc Information:
Status: Complete
Erasable: No
Sessions: 1
Sectors: 2.234.656
Size: 4.576.575.488 bytes
Time: 496:37:31 (MM:SS:FF)

TOC Information:
Session 1...
-> Track 01 (Mode 1, LBA: 0 - 2234655)
-> LeadOut (LBA: 2234656)

Physical Format Information (ADIP):
Disc ID: MCC-004-00
Book Type: DVD+R
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 2.491.711
Last Physical Sector in Layer 0: 0

Physical Format Information (Last Recorded):
Disc ID: MCC-004-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 2.431.263
Last Physical Sector in Layer 0: 0
------------------------------------------------------------------------------------
Error messages during verification:

I 15:48:35 Verifying Sectors... (LBA: 0 - 2234644)
W 15:52:10 Failed to Read Sector 7232 - ID CRC or ECC Error
W 15:52:10 Sector 7232 maps to File: VIDEO_TS\VTS_01_1.VOB
W 15:54:08 Failed to Read Sector 8304 - Illegal Mode For This Track
W 15:54:08 Sector 8304 maps to File: VIDEO_TS\VTS_01_1.VOB
E 15:54:34 Failed to Read Sector 8318 - Illegal Mode For This Track
E 15:54:34 Sector 8318 maps to File: VIDEO_TS\VTS_01_1.VOB
E 15:54:34 Failed to Verify Sectors!
E 15:54:34 Operation Failed! - Duration: 00:05:59
I 15:54:34 Average Verify Rate: 46 KB/s (0.0x) - Maximum Verify Rate: 3.675 KB/s (2.7x)

Would appreciate any help with this problem.
PI8
  Reply With Quote
Old 30 Mar 2007, 03:17 AM   #2
Junior Member
Junior Member
 
Join Date: Oct 2005
Posts: 31
Default

Good Morning...had the same problem with newest version of ImageBurn.
When I decided not to verify..the burn was successfull. Using Taiyo Yuden at 4X. Never had this issue with older versions of the software. Am at work now so unable to post any logs. Any feedback would be great.
dunlop is offline   Reply With Quote
Old 30 Mar 2007, 03:45 AM   #3
Author of ImgBurn
 
Join Date: Dec 2001
Location: UK
Posts: 772
Default

Try cleaning the lens on the drive that's not working.

At the moment it's just producing duff burns and that can only be a hardware / media issue.
__________________
The Official ImgBurn Website
LIGHTNING UK! is offline   Reply With Quote
Old 30 Mar 2007, 04:09 AM   #4
Junior Member
Junior Member
 
Join Date: Oct 2005
Posts: 31
Talking

Thanks for the reply LightningUK. And many thanks for creating such an awesome user-friendly program.
dunlop is offline   Reply With Quote
Old 30 Mar 2007, 05:29 AM   #5
PI8
Guest
 
Posts: n/a
Default

Thanks for your advice! I will give it a try. But why does the same lens work well when I rip a DVD or write a lightscribe-label?
  Reply With Quote
Old 30 Mar 2007, 05:39 AM   #6
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

I had a dirty lens that would still burn but not read disks right after they were burned, said a burned -r was an rw etc
Chewy is offline   Reply With Quote
Old 9 Apr 2007, 01:14 AM   #7
Junior Member
Junior Member
 
Join Date: Apr 2007
Posts: 4
Default

I'm having the same problems. I can rip the movie just fine run it through shrink no problem burn with imgburn when it verifies i get errors. playback on computer is jerky. playback in dvd player freezes and resets to earlier chapter. I'm using verbatim discs, dma is ok, cleanded all lasers, deleted movies and ripped again. nothing seems to fix the problem. could this be a hardware issue i have over 1000 burns with this burner
briwnt6 is offline   Reply With Quote
Old 9 Apr 2007, 01:18 AM   #8
Who Farted?
 
locoeng's Avatar
 
Join Date: Dec 2005
Location: behind you
Posts: 2,509
Default

Is your firmware current?
__________________


"I refuse to have a battle of wits with an unarmed person. It's not fair to you and no challenge for us."
Walt Kelly
locoeng is offline   Reply With Quote
Old 9 Apr 2007, 01:24 AM   #9
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

Quote:
could this be a hardware issue i have over 1000 burns with this burner
use cdspeed to test your dvdburner

probably worn out?
Chewy is offline   Reply With Quote
Old 9 Apr 2007, 08:43 PM   #10
Junior Member
Junior Member
 
Join Date: Apr 2007
Posts: 4
Default

cdspeed is showing discs that i know are good to be bad burns
briwnt6 is offline   Reply With Quote
Old 9 Apr 2007, 09:01 PM   #11
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

define good, play in a standalone?

cdspeed is just a tool to indicate(hopefully) some finer level of quality that playability

common belief is a disk that passes tests in cspeed like a transfer rate, a disk quality scan and a scan disk, will be more playable in more players for a longer period of time

a burn that fails these tests, but plays in a good standalone, will have problems in iffy players and become unplayable sooner
Chewy is offline   Reply With Quote
Old 10 Apr 2007, 05:31 AM   #12
Junior Member
Junior Member
 
Join Date: Apr 2007
Posts: 4
Default

yes play in 5 different standalone players no skips pauses pixelation plays flawlessly.
I've been lurking in this forum for over a year and have always found the answer to my problems without having to post but here in the last 2 weeks
I just can't burn a good copy. I'm fairly sure it's my burner I just wanted a second opinion.
I have a hp640c with updated firmware qs12 but like I said I have a ton of burns on this thing and figured it was the laser going out was all i could think of
briwnt6 is offline   Reply With Quote
Old 10 Apr 2007, 05:44 AM   #13
Who Farted?
 
locoeng's Avatar
 
Join Date: Dec 2005
Location: behind you
Posts: 2,509
Default

The good news it a new drive will be relatively inexpensive.
locoeng is offline   Reply With Quote
Old 10 Apr 2007, 05:50 AM   #14
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

I pulled one of mine apart to get at the laser lens, I just checked and I can barely see them on 2 of my drives with the tray open, tight fit but a long
qtip might work

strong air compressor is good too, I only saw one laser lens
Chewy is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
DVDDcrypter: Failed to Verify Sectors! heyjude85023 AVI, DivX/Xvid 4 17 Feb 2006 05:44 AM
Burn succesful, but verify failed sleepyhead ImgBurn 26 19 Dec 2005 02:17 AM
nero verify inaccessible sectors nhojnhoj Blank Media and Burning 1 26 Feb 2004 01:27 PM



All times are GMT +10. The time now is 02:05 PM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2018 Digital Digest

Visit DivXLand   Visit dvdloc8.com