Digital Video Forums  

Go Back   Digital Video Forums > Software Forums > ImgBurn

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 14 Feb 2007, 02:02 PM   #1
Junior Member
Junior Member
 
Join Date: Mar 2004
Posts: 10
Question-2 First burn with ImgBurn

Upgraded the computer to Vista over the weekend, hadn't gotten around to reinstalling Nero yet. Decided to try ImgBurn instead. Backed up a DVD using DVD Shrink to an ISO file and burned DVD with ImgBurn. DVD plays on my computer, on my older Sanyo standalone DVD player on the small TV but not the newer JVC DVD player attached to the big screen. I'm still relatively new to this. Any ideas? Thanks!!
janedo1586 is offline   Reply With Quote
Old 14 Feb 2007, 02:22 PM   #2
Just Trying To Help
 
soup's Avatar
 
Join Date: Nov 2005
Location: Canada Region 1
Posts: 7,524
Default

What king of blank discs are you using & did you check the manual for your new player that it played these discs? If you saved the burning log it would be in Program Files / ImgBurn / Log, could you copy & paste that burn log in to a reply post? Did you also get the newly updated version of ImgBurn? Being new here is a link you might be interested in.
__________________

soup is offline   Reply With Quote
Old 14 Feb 2007, 10:58 PM   #3
Junior Member
Junior Member
 
Join Date: Mar 2004
Posts: 10
Default

I'm using Verbatim DataLifePlus DVD+R discs, the player is compatible with all DVD formats, and this is the only one so far out of about a dozen backups that doesn't play. The only difference is that I used ImgBurn (the latest version 2.2.0.0) for this DVD.

Here's the log file:

I 06:57:05 ImgBurn Version 2.2.0.0 started!
I 06:57:05 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000)
I 06:57:05 Total Physical Memory: 2,094,000 KB - Available: 1,035,080 KB
I 06:57:06 Initialising SPTI...
I 06:57:06 Searching for SCSI / ATAPI devices...
I 06:57:06 Found 1 DVD▒RW!

Not really a huge deal if it won't play on the newer DVD other than it's hooked up to the big screen TV and I use that one for most movie watching. I'll check out the link. Thanks!!
janedo1586 is offline   Reply With Quote
Old 14 Feb 2007, 11:03 PM   #4
Digital Video Specialist
Digital Video Specialist
 
Dialysis1's Avatar
 
Join Date: Apr 2006
Location: upstate New York
Posts: 910
Default

Can you post the whole log?
__________________
DVDSubEdit
ImgBurn


Dialysis1 is offline   Reply With Quote
Old 15 Feb 2007, 01:07 AM   #5
Junior Member
Junior Member
 
Join Date: Mar 2004
Posts: 10
Default

That's all that was in the log.
janedo1586 is offline   Reply With Quote
Old 15 Feb 2007, 01:11 AM   #6
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

just put a blank in and copy and paste the screen on the right that shows
your burner and firmware and allowed burn speeds and the MID code
Chewy is offline   Reply With Quote
Old 15 Feb 2007, 02:34 AM   #7
Junior Member
Junior Member
 
Join Date: Mar 2004
Posts: 10
Default

At work now, will do when I get home. Thanks!!
janedo1586 is offline   Reply With Quote
Old 15 Feb 2007, 10:57 AM   #8
Junior Member
Junior Member
 
Join Date: Mar 2004
Posts: 10
Default

Okay...here's the info from the right side window in ImgBurn. Thanks!!

PHILIPS DVD+-RW DVD8801 4D28 (ATA)
Current Profile: DVD+R

Disc Information:
Status: Empty
Erasable: No
Free Sectors: 2,295,104
Free Space: 4,700,372,992 bytes
Free Time: 510:03:29 (MM:SS:FF)
Supported Write Speeds: 4x, 8x, 12x, 16x

Physical Format Information (ADIP):
Disc ID: MCC-004-00
Book Type: DVD+R
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0
janedo1586 is offline   Reply With Quote
Old 15 Feb 2007, 11:19 AM   #9
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

http://club.cdfreaks.com/showthread.php?t=178571

dell drive??

looks like it has recent firmware, the above thread is just for general knowledge but you might want to bookmark it for future use

make sure you set a burn speed of 8X or lower with a blank in with Imgburn
before you attempt another burn

also see if the benq tab will enable bitsetting, to increase playability

thread transfered to imgburn forum

please capture a complete burn log for us

Last edited by Chewy; 15 Feb 2007 at 11:23 AM
Chewy is offline   Reply With Quote
Old 15 Feb 2007, 11:32 AM   #10
Junior Member
Junior Member
 
Join Date: Mar 2004
Posts: 10
Default

Yes, Chewy, Dell XPS 600, about 8 months old.

I will follow your suggestions and see if I can get a DVD that works in the "good" player.

Thanks for the help!!
janedo1586 is offline   Reply With Quote
Old 24 Aug 2009, 12:30 PM   #11
Junior Member
Junior Member
 
Join Date: Aug 2009
Posts: 1
Unhappy

hey
this may sound stupid but im wondering exactly how i burn a dvd using Imgbrn.
I currently use AVS DVD Authoring.
It is a great program and very easy to use
but im useing the evaluation version
On this version its pretty self exlanitory
chapter if ya want or just build then burn dvd.
vualla disk burnt works in all dvd players i have tried.
problem is that the trial version leaves watermarks in the center of the screen ,,,coming on every say 15 minutes.
also even though it has an aspect ratio to check it does not work with the trial and realy want to use 4:3 aspect for our tv.
Is there even a 4:3 ratio to choos from on image burn.
P.S. my first 2 trials of image burn didnt work and didnt play in the dvd player.
complete instructions would be awsomely appreciated as i have been told the image burn was a very good burner.
HELP lol
slowpoke1967 is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
manual imgburn burn bikeboy ImgBurn 3 16 Jan 2007 08:33 PM
set ImgBurn to burn dvd to 2 discs rapidfirerob ImgBurn 5 21 Dec 2006 02:36 AM
Have any one burn with imgburn from a file? NightTran ImgBurn 3 10 Dec 2005 02:49 PM



All times are GMT +10. The time now is 02:09 AM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2018 Digital Digest

Visit DivXLand   Visit dvdloc8.com