Digital Video Forums  

Go Back   Digital Video Forums > Software Forums > ImgBurn

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 7 Mar 2007, 06:38 AM   #1
Digital Video Enthusiast
Digital Video Enthusiast
 
beachbumm33's Avatar
 
Join Date: Feb 2007
Posts: 380
Default I/O error

I'm using a HP940 burner thats flashed over to a lite on LH-18A1H (HL06), ever since the flash, when I use dvd shrink and burn iso with ImgBurn I get a power calibration error. If i unplug the power from this device, then try to burn the iso with ImgBurn (not using dvd shrink) it burns.

Is there something I need to do with ImgBurn to rectify this?

This particular burner only has 25 burns on it and has been cleaned.

I use dvdshrink and ImgBurn with my lite-on 160p6s with absolutely no problems.

Any help?


here are 2 logs, one success with just iso, and one non success with dvdshrinkto imgburn


; //****************************************\\
; ImgBurn Version 2.2.0.0 - Log
; Tuesday, 06 March 2007, 12:50:45
; \\****************************************//
;
;
I 12:02:26 ImgBurn Version 2.2.0.0 started!
I 12:02:26 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 12:02:26 Total Physical Memory: 513,792 KB - Available: 278,124 KB
W 12:02:26 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 12:02:26 Initialising SPTI...
I 12:02:26 Searching for SCSI / ATAPI devices...
I 12:02:52 Found 1 DVD±RW and 1 DVD±RW/RAM!
I 12:03:01 Operation Started!
I 12:03:01 Source File: C:\FRIDAY.ISO
I 12:03:01 Source File Sectors: 2,183,462 (MODE1/2048)
I 12:03:01 Source File Size: 4,471,730,176 bytes
I 12:03:01 Source File Volume Identifier: FRIDAY
I 12:03:01 Source File Implementation Identifier: DVD Shrink
I 12:03:01 Source File File System(s): ISO9660, UDF (1.02)
I 12:03:01 Destination Device: [0:0:0] LITE-ON DVDRW LH-18A1H HL06 (E (ATA)
I 12:03:01 Destination Media Type: DVD+R (Disc ID: YUDEN000-T02-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 12:03:01 Destination Media Sectors: 2,295,104
I 12:03:01 Write Mode: DVD
I 12:03:01 Write Type: DAO
I 12:03:01 Write Speed: 4x
I 12:03:01 Link Size: Auto
I 12:03:01 Test Mode: No
I 12:03:01 BURN-Proof: Enabled
I 12:03:01 Filling Buffer... (20 MB)
I 12:03:01 Writing LeadIn...
I 12:03:26 Writing Image...
I 12:16:56 Synchronising Cache...
I 12:17:00 Closing Track...
I 12:17:02 Finalising Disc...
I 12:17:20 Image MD5: a0eNero Serial Removed84d3b
I 12:17:20 Operation Successfully Completed! - Duration: 00:14:19
I 12:17:20 Average Write Rate: 5,397 KB/s (3.9x) - Maximum Write Rate: 5,618 KB/s (4.1x)
I 12:17:20 Cycling Tray before Verify...
W 12:17:26 Waiting for device to become ready...
I 12:17:38 Device Ready!
I 12:17:38 Operation Started!
I 12:17:38 Source Device: [0:0:0] LITE-ON DVDRW LH-18A1H HL06 (E (ATA)
I 12:17:38 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: YUDEN000-T02-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 12:17:38 Image File: C:\FRIDAY.ISO
I 12:17:38 Image File Sectors: 2,183,462 (MODE1/2048)
I 12:17:38 Image File Size: 4,471,730,176 bytes
I 12:17:38 Image File Volume Identifier: FRIDAY
I 12:17:38 Image File Implementation Identifier: DVD Shrink
I 12:17:38 Image File File System(s): ISO9660, UDF (1.02)
I 12:17:38 Verifying Sectors... (LBA: 0 - 2183461)
I 12:22:29 Device MD5: a0eNero Serial Removed84d3b
I 12:22:29 Device (Padded) MD5: 00fNero Serial Removed2
I 12:22:29 Image MD5: a0eNero Serial Removed84d3b
I 12:22:29 Operation Successfully Completed! - Duration: 00:04:51
I 12:22:29 Average Verify Rate: 15,006 KB/s (10.8x) - Maximum Verify Rate: 22,125 KB/s (16.0x)
I 12:50:45 Close Request Acknowledged
I 12:50:45 Closing Down...
I 12:50:45 Shutting down SPTI...
I 12:50:45 ImgBurn closed!
;
;
; //****************************************\\
; ImgBurn Version 2.2.0.0 - Log
; Tuesday, 06 March 2007, 12:02:08
; \\****************************************//
;
;
I 11:54:20 ImgBurn Version 2.2.0.0 started!
I 11:54:20 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 11:54:20 Total Physical Memory: 513,792 KB - Available: 277,664 KB
W 11:54:20 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 11:54:20 Initialising SPTI...
I 11:54:20 Searching for SCSI / ATAPI devices...
I 11:54:21 Found 1 DVD±RW and 1 DVD±RW/RAM!
I 11:54:21 Operation Started!
I 11:54:21 Source File: C:\FRIDAY.ISO
I 11:54:21 Source File Sectors: 2,183,462 (MODE1/2048)
I 11:54:21 Source File Size: 4,471,730,176 bytes
I 11:54:21 Source File Volume Identifier: FRIDAY
I 11:54:21 Source File Implementation Identifier: DVD Shrink
I 11:54:21 Source File File System(s): ISO9660, UDF (1.02)
I 11:54:21 Destination Device: [0:0:0] LITE-ON DVDRW LH-18A1H HL06 (E (ATA)
I 11:54:21 Destination Media Type: DVD+R (Disc ID: YUDEN000-T02-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 11:54:21 Destination Media Sectors: 2,295,104
I 11:54:21 Write Mode: DVD
I 11:54:21 Write Type: DAO
I 11:54:21 Write Speed: 4x
I 11:54:21 Link Size: Auto
I 11:54:21 Test Mode: No
I 11:54:21 BURN-Proof: Enabled
I 11:54:22 Filling Buffer... (20 MB)
I 11:54:22 Writing LeadIn...
W 11:54:51 Failed to Write Sectors 0 - 31 - Power Calibration Area Error
W 11:54:51 Retrying (1 of 20)...
W 11:55:07 Retry Failed - Power Calibration Area Error
W 11:55:07 Retrying (2 of 20)...
W 11:55:23 Retry Failed - Power Calibration Area Error
W 11:55:23 Retrying (3 of 20)...
W 11:55:32 Retry Failed - Power Calibration Area Error
W 11:55:32 Retrying (4 of 20)...
W 11:55:46 Retry Failed - Power Calibration Area Error
W 11:55:46 Retrying (5 of 20)...
W 11:55:55 Retry Failed - Power Calibration Area Error
W 11:55:55 Retrying (6 of 20)...
W 11:56:10 Retry Failed - Power Calibration Area Error
W 11:56:10 Retrying (7 of 20)...
W 11:56:25 Retry Failed - Power Calibration Area Error
W 11:56:25 Retrying (8 of 20)...
W 11:56:39 Retry Failed - Power Calibration Area Error
W 11:56:39 Retrying (9 of 20)...
W 11:56:54 Retry Failed - Power Calibration Area Error
W 11:56:54 Retrying (10 of 20)...
W 11:57:09 Retry Failed - Power Calibration Area Error
W 11:57:09 Retrying (11 of 20)...
W 11:57:24 Retry Failed - Power Calibration Area Error
W 11:57:24 Retrying (12 of 20)...
W 11:57:39 Retry Failed - Power Calibration Area Error
W 11:57:39 Retrying (13 of 20)...
W 11:57:54 Retry Failed - Power Calibration Area Error
W 11:57:54 Retrying (14 of 20)...
W 11:58:09 Retry Failed - Power Calibration Area Error
W 11:58:09 Retrying (15 of 20)...
W 11:58:24 Retry Failed - Power Calibration Area Error
W 11:58:24 Retrying (16 of 20)...
W 11:58:39 Retry Failed - Power Calibration Area Error
W 11:58:39 Retrying (17 of 20)...
W 11:58:54 Retry Failed - Power Calibration Area Error
W 11:58:54 Retrying (18 of 20)...
W 11:59:09 Retry Failed - Power Calibration Area Error
W 11:59:09 Retrying (19 of 20)...
W 11:59:24 Retry Failed - Power Calibration Area Error
W 11:59:24 Retrying (20 of 20)...
W 11:59:40 Retry Failed - Power Calibration Area Error
E 12:02:01 Failed to Write Sectors 0 - 31 - Power Calibration Area Error
I 12:02:01 Synchronising Cache...
I 12:02:02 Closing Track...
I 12:02:03 Finalising Disc...
E 12:02:04 Failed to Write Image!
E 12:02:04 Operation Failed! - Duration: 00:07:42
I 12:02:04 Average Write Rate: N/A - Maximum Write Rate: N/A
I 12:02:08 Close Request Acknowledged
I 12:02:08 Closing Down...
I 12:02:08 Shutting down SPTI...
I 12:02:08 ImgBurn closed!
;

Last edited by beachbumm33; 7 Mar 2007 at 06:43 AM
beachbumm33 is offline   Reply With Quote
Old 8 Mar 2007, 01:02 AM   #2
Author of ImgBurn
 
Join Date: Dec 2001
Location: UK
Posts: 772
Default

This is a drive / media issue. The software doesn't even come into it.

I've just installed the new LH-20A1H drive in my PC and it failed to write to the first YUDEN000-T02-00 disc I gave it. Whilst the drive was performing the LeadIn stuff, it was making some odd sounds. It took a while but eventually it errored out with a 'Write Error'. I put another disc in and it worked fine - achieving a 99% scan in DVDInfoPro (BenQ 1655) and 95% in CDSpeed (LH-20A1H).

So basically these things just happen! As the firmware matures, I'm sure they'll fix these issues.
__________________
The Official ImgBurn Website
LIGHTNING UK! is offline   Reply With Quote
Old 8 Mar 2007, 03:46 PM   #3
Digital Video Enthusiast
Digital Video Enthusiast
 
beachbumm33's Avatar
 
Join Date: Feb 2007
Posts: 380
Default

Thanks Lightning.....I definately came to the conclusion that it wasnt ImgBurn....I could pull up iso's created by shrink, and burn them, but not go automatically to Imgburn from shrink and burn, if that makes sense. I flashed that drive back to the hp firmware and just use it as a reader and lightscribe burner since i picked up another shw-160p6s. Having great success with that burner!
Thanks for the fantastic burning program, keep up the good work!!!
beachbumm33 is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Power Calibration Area Error/ Session Fixation Error Hue983 DVD Blank Media, Burning, Recording Hardware 10 13 Dec 2006 05:59 AM
burning error - power calibration area error pbakes13 DVD Blank Media, Burning, Recording Hardware 2 6 Jul 2005 12:39 PM
DVD Error Error Code: 8901000F An internal error has occurred. stinkfist DVD Encoding and Playback 1 18 Apr 2004 04:52 AM



All times are GMT +10. The time now is 10:29 PM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2018 Digital Digest

Visit DivXLand   Visit dvdloc8.com