Digital Video Forums  

Go Back   Digital Video Forums > Software Forums > ImgBurn

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 4 Jul 2007, 11:54 AM   #1
Junior Member
Junior Member
 
chris83's Avatar
 
Join Date: May 2005
Location: Welch, MN USA
Posts: 21
Default ImgBurn Lockup

Hi All,

I've been backing up my "Lord of the Rings" extended edition collection, using PgcEdit with ImgBurn, on Memorex DVD+R DL. I got through both "Fellowship of the Rings" discs and part I of "The Two Towers". PgcEdit set the layer break and everything burned fine. On part II of "The Two Towers" all was going well until I got to ImgBurn; things got hung up and at the bottom of the ImgBurn window it said "Setting L0 Data Zone Capacity...". Nothing further happened. I could hear my DVD drive spinning, but the burn didn't go forward.

I'm not terribly experienced with DL DVD's, but I can't imagine it's a disc or firmware issue when the first three DVD's backed up perfectly do everything the same.

Any ideas?

Thank you.
chris83 is offline   Reply With Quote
Old 4 Jul 2007, 12:09 PM   #2
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

Quote:
Memorex DVD+R DL
http://www.videohelp.com/dvdmedia/me.../2869#comments

actually you were very lucky many can't get even half of them to burn
Chewy is offline   Reply With Quote
Old 4 Jul 2007, 03:07 PM   #3
Not a god of digital video
 
blutach's Avatar
 
Join Date: Oct 2004
Location: is everything!
Posts: 24,628
Default

To add to Chewy's post - always post your ImgBurn log when you got a problem.

In the meantime, read and implement the Golden Rules of Burning - a firmware update may also be in order.

Regards
__________________
Les

Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
[What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

Explore the sites and the programs - there's a gold mine of information in them

Don't forget to play the Digital Digest Quiz!!! (Click here)

blutach is offline   Reply With Quote
Old 5 Jul 2007, 12:36 AM   #4
Junior Member
Junior Member
 
chris83's Avatar
 
Join Date: May 2005
Location: Welch, MN USA
Posts: 21
Default Reply Part I - ImgBurn Log

I tried again this morning; this time the "Setting L0 Data Zone Capacity..." message showed up again, but only for 50 seconds or so. Then it started writing. Then it got hung up at about 42% completion. That hadn't happened before Here is the log:

I 08:58:20 ImgBurn Version 1.3.0.0 started!
I 08:58:20 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 08:58:20 Initialising SPTI...
I 08:58:20 Searching for SCSI / ATAPI devices...
I 08:58:20 Found 1 CD-ROM and 1 DVD▒RW!
I 08:59:53 Operation Started!
I 08:59:53 Source File: C:\RETURN_OF_THE_KING_EXTENDED_ED.ISO
I 08:59:53 Source File Sectors: 3,912,455 (MODE1/2048)
I 08:59:53 Source File Size: 8,012,707,840 bytes
I 08:59:53 Source File Volume Identifier: RETURN_OF_THE_KING_EXTENDED_ED
I 08:59:53 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
I 08:59:53 Source File Implementation Identifier: mkisofs
I 08:59:53 Source File UDF Revision: 1.02
I 08:59:53 Destination Device: [4:0:0] TSSTcorp CD/DVDW TS-H552B GA04 (E (ATA)
I 08:59:53 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x)
I 08:59:53 Destination Media Sectors: 4,173,824
I 08:59:53 Write Mode: DVD
I 08:59:53 Write Type: DAO
I 08:59:53 Write Speed: MAX
I 08:59:53 Link Size: Auto
I 08:59:53 Test Mode: No
I 08:59:53 BURN-Proof: Enabled
I 09:00:11 Optimal L1 Data Zone Start LBA: 1968800 (VTS_01, PGC: 1, Cell: 16)
I 09:00:11 Optimal L0 Data Zone Capacity: 1,968,800
I 09:00:11 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set
I 09:01:02 Filling Buffer...
I 09:01:05 Writing LeadIn...
I 09:01:07 Writing Image...
I 09:01:07 Writing Layer 0... (LBA: 0 - 1968799)
W 09:17:53 Failed to Write Sectors 1664928 - 1664959 - Write Error
W 09:17:53 Retrying (1 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (2 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (3 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (4 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (5 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (6 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (7 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (8 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (9 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (10 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (11 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (12 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (13 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (14 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (15 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (16 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (17 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (18 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (19 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:17:53 Retrying (20 of 20)...
W 09:17:53 Retry Failed - Invalid Address For Write
W 09:30:01 Retrying (21)...
W 09:30:01 Retry Failed - Invalid Address For Write
W 09:30:02 Retrying (22)...
W 09:30:02 Retry Failed - Invalid Address For Write
W 09:30:05 Retrying (23)...
W 09:30:05 Retry Failed - Invalid Address For Write
W 09:30:06 Retrying (24)...
W 09:30:06 Retry Failed - Invalid Address For Write
W 09:30:07 Retrying (25)...
W 09:30:07 Retry Failed - Invalid Address For Write
W 09:30:08 Retrying (26)...
W 09:30:08 Retry Failed - Invalid Address For Write
W 09:30:09 Retrying (27)...
W 09:30:09 Retry Failed - Invalid Address For Write
E 09:30:15 Failed to Write Sectors 1664928 - 1664959 - Write Error
I 09:30:15 Synchronising Cache...
I 09:30:16 Closing Track...
I 09:30:21 Finalising Disc...
W 09:30:43 Potential 'WaitImmediateIO' Deferred Error - Session Fixation Error Writing Lead Out
E 09:30:45 Finalise Disc Failed! - Reason: No Additional Sense Information
E 09:30:45 Failed to Write Image!
E 09:30:45 Operation Failed! - Duration: 00:30:52
I 09:30:45 Average Write Rate: 1,904 KB/s (1.4x) - Maximum Write Rate: 3,414 KB/s (2.5x)
chris83 is offline   Reply With Quote
Old 5 Jul 2007, 12:44 AM   #5
Junior Member
Junior Member
 
chris83's Avatar
 
Join Date: May 2005
Location: Welch, MN USA
Posts: 21
Default Reply Part II - Firmware

I have a Samsung TS-H552B DVD dual layer recorder. It was OEM on my eMachines PC. The firmware version I currently have is GA04. I went to the Firmware Page and it looks as though the most recent version for Gateway OEM is still GA04. Is this correct? If not, how should I proceed?

I've been backing up/burning for a couple years now with this setup, and I can count the number of issues I've had while doing so on one hand. I'm guessing it WAS the Memorex DVD's, but I didn't pay anything for them, so it's not a big deal.

Thank You.
chris83 is offline   Reply With Quote
Old 5 Jul 2007, 12:58 AM   #6
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

http://forum.rpc1.org/dl_firmware.php?download_id=1911
this page is really messed up, I found reference to your firmware(gateway/emachine) in 2005 forum posts, so obviously your's is not new

ftp://ftp.gateway.com/pub/hardware_s...rmwareGA05.exe

I found this link from a 2006 post

I would buy a new burner tho, never did like the 552B at all, an oem version would be worse
Chewy is offline   Reply With Quote
Old 5 Jul 2007, 11:04 AM   #7
Not a god of digital video
 
blutach's Avatar
 
Join Date: Oct 2004
Location: is everything!
Posts: 24,628
Default

Quote:
RITEK-D01-01
Get rid of these and change to Verbatims.

Regards
blutach is offline   Reply With Quote
Old 5 Jul 2007, 01:00 PM   #8
Junior Member
Junior Member
 
chris83's Avatar
 
Join Date: May 2005
Location: Welch, MN USA
Posts: 21
Default

Again, thanks for all the help.

I upgraded the firmware to GA05; I have no plans to change burners at this time. As mentioned, I've been using this one for over two years and have had probably a 99% success rate with my burns.

As for the DVD DL's themselves, when buying I probably WILL go the Verbatim route, but for the time being you can't beat free samples.
chris83 is offline   Reply With Quote
Old 6 Jul 2007, 02:47 AM   #9
Author of ImgBurn
 
Join Date: Dec 2001
Location: UK
Posts: 772
Default

Why on earth are you still running 1.3.0.0?!
__________________
The Official ImgBurn Website
LIGHTNING UK! is offline   Reply With Quote
Old 6 Jul 2007, 05:59 AM   #10
Junior Member
Junior Member
 
chris83's Avatar
 
Join Date: May 2005
Location: Welch, MN USA
Posts: 21
Default

Quote:
Originally Posted by LIGHTNING UK! View Post
Why on earth are you still running 1.3.0.0?!
I've upgraded...I beg forgiveness.
chris83 is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
ImgBurn Lockup xfile102 ImgBurn 21 10 Jul 2007 10:13 AM
DVD==>SVCD lockup river Conversion/Encoding 1 23 Sep 2002 09:52 AM



All times are GMT +10. The time now is 10:57 AM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2018 Digital Digest

Visit DivXLand   Visit dvdloc8.com