Digital Video Forums  

Go Back   Digital Video Forums > Software Forums > ImgBurn

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 21 Jul 2006, 02:53 PM   #1
Junior Member
Junior Member
 
Join Date: Jul 2006
Posts: 3
Default Media Incompatible Error

Hello Everyone,

I am new at this so please forgive my ignorance. I have a SONY DVD RW DRU510A Burner and I used ImgBurn to create DVDs successfully. The DVDs I was using were Memorex DVD+R. I ran out of those DVDs and went out and got myself some new FUJIFILM +R Blank discs. However, when I try to burn an image on those, ImgBurn says the following:

I/O Error!

Device: [0:0:0] SONY DVD RW DRU-510a 1.0c (G(1394)

ScsiStatus: 0x02
Interpretation: Check Condition

CDB: 2A 00 00 00 08 C0 00 00 20 00
Interpretation: Write(10) - Sectors: 2240 - 2271

Sense Area: 70 00 03 00 00 00 00 0B 38 E8 3C 82 73 03 8E D9 3A F8 00 00 00 00 00 00
Interpretation: Power Calibration Area Error


And the ImgBurn Log is as follows:

I 00:42:15 ImgBurn Version 1.3.0.0 started!
I 00:42:15 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 1)
I 00:42:15 Initialising SPTI...
I 00:42:15 Searching for SCSI / ATAPI devices...
I 00:42:16 Found 1 CD-RW, 1 DVD-ROM and 1 DVD▒RW!
I 00:45:22 Operation Started!
I 00:45:22 Source File: C:\MOVIE.MDS
I 00:45:22 Source File Sectors: 1,924,480 (MODE1/2048)
I 00:45:22 Source File Size: 3,941,335,040 bytes
I 00:45:22 Source File Volume Identifier: DVDVolume
I 00:45:22 Source File Implementation Identifier: DVD Producer 1.0
I 00:45:22 Source File UDF Revision: 1.02
I 00:45:22 Destination Device: [0:0:0] SONY DVD RW DRU-510A 1.0c (G (1394)
I 00:45:22 Destination Media Type: DVD+R (Disc ID: PRODISC-R05-01) (Speeds: 2x, 2.4x, 4x)
I 00:45:22 Destination Media Sectors: 2,295,104
I 00:45:22 Write Mode: DVD
I 00:45:22 Write Type: DAO
I 00:45:22 Write Speed: MAX
I 00:45:22 Link Size: Auto
I 00:45:22 Test Mode: No
I 00:45:22 BURN-Proof: Enabled
I 00:45:24 Filling Buffer...
I 00:45:25 Writing LeadIn...
W 00:46:32 Failed to Write Sectors 2240 - 2271 - Power Calibration Area Error
W 00:46:32 Retrying (1 of 2)...
W 00:46:32 Retry Failed - Invalid Address For Write
W 00:46:32 Retrying (2 of 2)...
W 00:46:32 Retry Failed - Invalid Address For Write
E 00:50:18 Failed to Write Sectors 2240 - 2271 - Power Calibration Area Error
I 00:50:18 Synchronising Cache...
I 00:50:19 Closing Track...
I 00:50:20 Finalising Disc...
E 00:50:21 Failed to Write Image!
E 00:50:24 Operation Failed! - Duration: 00:04:59
I 00:50:24 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)

I would appreciate any guidance and help on this from the experts.
Thanks
cs_newbie is offline   Reply With Quote
Old 21 Jul 2006, 03:05 PM   #2
Digital Video Expert
Digital Video Expert
 
Join Date: Apr 2006
Posts: 713
Default

Have you checked to see if there is an update to the firmware for your burner?
copyless is offline   Reply With Quote
Old 21 Jul 2006, 06:00 PM   #3
Digital Video Master
Digital Video Master
 
benbryant's Avatar
 
Join Date: Aug 2005
Location: Oahu Hawaii USA
Posts: 1,314
Default

Quote:
I 00:45:22 Destination Device: [0:0:0] SONY DVD RW DRU-510A 1.0c
Your Sony burner's firmware is very old. Please go the link below to down load the newer frimware - Version 1.1a:

http://forum.rpc1.org/dl_firmware.php?download_id=1597

Regards
benbryant is offline   Reply With Quote
Old 21 Jul 2006, 08:13 PM   #4
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

Welcome to the forum


Those fuji disks are a brand new mid code,

http://www.videohelp.com/dvdmedia.ph...PRODISC.R05%20

definitely try the firmware update, but if it doesn't work, try to find some 8x
media, those disks(16x) are decent media from the scans at the link I found.

Since new dvd burners are so cheap, I would save those blanks for when you upgrade.
Chewy is offline   Reply With Quote
Old 21 Jul 2006, 08:17 PM   #5
If it aint broke, don't fix it
 
a2j3's Avatar
 
Join Date: Feb 2006
Location: United States
Posts: 546
Talking-2 Hello cs_newbie

Not only is ur firmware out of date, but it could also be bad media.Click on this link 4 help with media. Hope this helps. http://www.digitalfaq.com/media/dvdmedia.htm
__________________

Last edited by a2j3; 21 Jul 2006 at 08:27 PM
a2j3 is offline   Reply With Quote
Old 21 Jul 2006, 08:25 PM   #6
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

even the new firmware is out of date
Quote:
Sat Nov 06, 2004
Chewy is offline   Reply With Quote
Old 22 Jul 2006, 12:25 AM   #7
Junior Member
Junior Member
 
Join Date: Jul 2006
Posts: 3
Default Thank you

Thank you everyone for the advice and guidance. I will try these things out and let you know the results.
cs_newbie is offline   Reply With Quote
Old 24 Jul 2006, 09:10 AM   #8
Junior Member
Junior Member
 
Join Date: Jul 2006
Posts: 3
Default Problem still exists

I tried the firmware update suggested by benbryant and re-tried with two separate discs to make sure I was not dealing with bad media. It still did not work. So, I am guessing Chewy's advice about keeping these discs around for the future and getting myself some others for now is the one to follow. Any suggestions on which media I should get that would work with this drive and with the current firmware i.e. 1.1a?
cs_newbie is offline   Reply With Quote
Old 24 Jul 2006, 09:11 AM   #9
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

some 8x made in japan

or sony 8x mit
Chewy is offline   Reply With Quote
Old 28 Aug 2006, 08:56 AM   #10
Junior Member
Junior Member
 
Join Date: Aug 2006
Posts: 1
Default

I upgraded to SONY DVD RW DRU510A 1.1a firmware and had problems burning DVDs. So after about 7 failed DVDs, I downgraded to 1.0d and everything works great!

Here is the link for 1.0d:
http://sony.storagesupport.com/dvdrw...d/510A_10d.zip
dontbugme is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Synchronise Cache Failed - help? BuryNedRight ImgBurn 17 26 Jun 2006 02:58 AM
FAQ: Error Codes Nero 7 cynthia FAQ and Guides 3 6 Jan 2006 10:06 AM



All times are GMT +10. The time now is 02:43 PM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2018 Digital Digest

Visit DivXLand   Visit dvdloc8.com