Digital Video Forums  

Go Back   Digital Video Forums > Software Forums > ImgBurn

Reply
 
LinkBack Thread Tools Search this Thread Rating: Thread Rating: 2 votes, 1.00 average. Display Modes
Old 21 May 2007, 02:49 AM   #1
Junior Member
Junior Member
 
Join Date: Jul 2004
Posts: 34
Default need help with imgburn

Hi i have went through 5 different dvd players(all different makes) with all the same problems and am now wondering if i could be using the wrong settings in imgburn

the problem is every dvd or xvid file i play it skips about 10 to 15 seconds at leat once every movie

when i make the image i select ISO9660 + UDF and i noticed in NERO i was always using ISO9660 + Joilet

Which one am i supossed to use and could this cause the skipping problem

thanks
bigggt is offline   Reply With Quote
Old 21 May 2007, 02:51 AM   #2
Lord of Digital Video
Lord of Digital Video
 
Gary D's Avatar
 
Join Date: Dec 2005
Location: Canada-eh?
Posts: 2,266
Default

This sounds like a burning or quality problem. Can you attach an ImgBurn log?
Gary D is offline   Reply With Quote
Old 21 May 2007, 03:07 AM   #3
Junior Member
Junior Member
 
Join Date: Jul 2004
Posts: 34
Default

Thanks Gary

10:08:03 ImgBurn Version 2.3.2.0 started!
I 10:08:03 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)
I 10:08:03 Total Physical Memory: 1,046,952 KB - Available: 597,216 KB
W 10:08:03 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 10:08:03 Initialising SPTI...
I 10:08:03 Searching for SCSI / ATAPI devices...
I 10:08:03 Found 1 DVD-ROM and 1 DVD▒RW!
I 10:08:18 Operation Started!
I 10:08:18 Building Image Tree...
I 10:08:18 Checking Directory Depth...
I 10:08:18 Calculating Totals...
I 10:08:18 Preparing Image...
I 10:08:18 Checking Path Length...
I 10:08:18 Image Size: 4,684,873,728 bytes
I 10:08:18 Image Sectors: 2,287,536
I 10:08:18 Operation Successfully Completed! - Duration: 00:00:00
I 10:08:23 Operation Started!
I 10:08:23 Building Image Tree...
I 10:08:28 Checking Directory Depth...
I 10:08:28 Calculating Totals...
I 10:08:28 Preparing Image...
I 10:08:28 Checking Path Length...
I 10:08:28 Image Size: 4,684,873,728 bytes
I 10:08:28 Image Sectors: 2,287,536
I 10:08:29 Operation Successfully Completed! - Duration: 00:00:05
I 10:08:29 Operation Started!
I 10:08:29 Image Contents: 2 Files, 0 Folders
I 10:08:29 Image Sectors: 2,287,536
I 10:08:29 Image Size: 4,684,873,728 bytes
I 10:08:29 Image Single Layer Profile: DVD-R/RW (Media Capacity: 2,298,496)
I 10:08:29 Image Volume Identifier: 91
I 10:08:29 Image Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!
I 10:08:29 Image Implementation Identifier: ImgBurn
I 10:08:29 Image File System(s): ISO9660, UDF (1.02)
I 10:08:29 Destination File: C:\Movies\DVD LAB\91.iso
I 10:08:29 Destination Free Space: 114,641,362,944 bytes (111,954,456 KB) (109,330 MB) (106 GB)
I 10:08:29 Destination File System: NTFS
I 10:08:29 File Splitting: Auto
I 10:08:29 Writing Image...
I 10:12:45 Image MD5: 87f5Nero Serial Removed
I 10:12:45 Operation Successfully Completed! - Duration: 00:04:15
I 10:12:45 Average Write Rate: 17,941 KB/s (13.0x) - Maximum Write Rate: 27,172 KB/s (19.6x)
I 10:32:20 Operation Started!
I 10:32:20 Source File: C:\Movies\DVD LAB\91.iso
I 10:32:20 Source File Sectors: 2,287,536 (MODE1/2048)
I 10:32:20 Source File Size: 4,684,873,728 bytes
I 10:32:20 Source File Volume Identifier: 91
I 10:32:20 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!
I 10:32:20 Source File Implementation Identifier: ImgBurn
I 10:32:20 Source File File System(s): ISO9660, UDF (1.02)
I 10:32:20 Destination Device: [0:0:0] HP DVD Writer 740b FF24 (E (ATA)
I 10:32:20 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 4x, 8x, 12x, 16x)
I 10:32:20 Destination Media Sectors: 2,297,888
I 10:32:20 Write Mode: DVD
I 10:32:20 Write Type: DAO
I 10:32:20 Write Speed: 4x
I 10:32:20 Link Size: Auto
I 10:32:20 Test Mode: No
I 10:32:20 BURN-Proof: Enabled
I 10:32:20 Filling Buffer... (20 MB)
I 10:32:22 Writing LeadIn...
I 10:32:40 Writing Image... (LBA: 0 - 2287535)
I 10:46:47 Synchronising Cache...
I 10:47:17 Image MD5: 87f5Nero Serial Removed
I 10:47:17 Operation Successfully Completed! - Duration: 00:14:57
I 10:47:17 Average Write Rate: 5,401 KB/s (3.9x) - Maximum Write Rate: 5,618 KB/s (4.1x)
I 10:47:17 Cycling Tray before Verify...
W 10:47:27 Waiting for device to become ready...
I 10:47:44 Device Ready!
I 10:47:44 Operation Started!
I 10:47:44 Source Device: [0:0:0] HP DVD Writer 740b FF24 (E (ATA)
I 10:47:44 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 03RG20) (Speeds: 4x, 8x, 12x, 16x)
I 10:47:44 Image File: C:\Movies\DVD LAB\91.iso
I 10:47:44 Image File Sectors: 2,287,536 (MODE1/2048)
I 10:47:44 Image File Size: 4,684,873,728 bytes
I 10:47:44 Image File Volume Identifier: 91
I 10:47:44 Image File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!
I 10:47:44 Image File Implementation Identifier: ImgBurn
I 10:47:44 Image File File System(s): ISO9660, UDF (1.02)
I 10:47:44 Verifying Sectors... (LBA: 0 - 2287535)
I 10:55:40 Device MD5: 87f5Nero Serial Removed
I 10:55:40 Image MD5: 87f5Nero Serial Removed
I 10:55:40 Operation Successfully Completed! - Duration: 00:07:56
I 10:55:40 Average Verify Rate: 9,611 KB/s (6.9x) - Maximum Verify Rate: 14,005 KB/s (10.1x)
I 11:38:09 Close Request Acknowledged
I 11:38:09 Closing Down...
I 11:38:13 Shutting down SPTI...
I 11:38:13 ImgBurn closed!
bigggt is offline   Reply With Quote
Old 21 May 2007, 04:23 AM   #4
Lord of Digital Video
Lord of Digital Video
 
Gary D's Avatar
 
Join Date: Dec 2005
Location: Canada-eh?
Posts: 2,266
Default

It verified OK. Can you do a Nero CD/DVD Speed transfer test? I am wondering if you getting the occassional unreadable sector. The discs are very good usually. I wonder if the transfer test will show an area with unreadable sectors.

Just post the results whether it is all green or not.
Gary D is offline   Reply With Quote
Old 21 May 2007, 04:23 AM   #5
Who Farted?
 
locoeng's Avatar
 
Join Date: Dec 2005
Location: behind you
Posts: 2,509
Default

Quote:
I 10:32:20 Write Speed: 4x
I would bring my burn speed up to 8X...Firmware looks to be current and media should be good, so now it may be a compression issue. You aren't using paper adhesive labels are you?
__________________


"I refuse to have a battle of wits with an unarmed person. It's not fair to you and no challenge for us."
Walt Kelly
locoeng is offline   Reply With Quote
Old 21 May 2007, 04:29 AM   #6
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

http://h10025.www1.hp.com/ewfrf/wc/s...tem=pv-42566-1

might help?

I would test with a known good iso or try again with default settings
Chewy is offline   Reply With Quote
Old 21 May 2007, 05:14 AM   #7
Junior Member
Junior Member
 
Join Date: Jul 2004
Posts: 34
Default

thanks all

@ Gary

I always do a Nero CD/DVD Speed transfer test and they are all Green

@ locoeng

I always thought the lower speed the better and the dvd's are printable ,so no adhesive labels

@ Chewy

I think i will try and update the firmware this time

Could someone just verify which setting i should choose in Imgburn

ISO9660 + Joilet
or
ISO9660 + UDF

thanks
bigggt is offline   Reply With Quote
Old 21 May 2007, 05:20 AM   #8
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

Quote:
ISO9660 + UDF
default setting in build mode for a data dvd

but heck I don't know?
Chewy is offline   Reply With Quote
Old 21 May 2007, 05:23 AM   #9
Dan
Digital Video Master
Digital Video Master
 
Join Date: Dec 2005
Location: Ottawa
Posts: 1,029
Default

Have you tried different media? or do you have the same problem with any and all media? That drive seems to like some, hate others.

@ bigggt

I noticed you have other threads with burning problems and issues with that burner, seems like it's more trouble then it's worth???
__________________


Last edited by Dan; 21 May 2007 at 05:29 AM
Dan is offline   Reply With Quote
Old 22 May 2007, 07:47 PM   #10
Author of ImgBurn
 
Join Date: Dec 2001
Location: UK
Posts: 772
Default

The file system isn't the problem.

Your players can obviously read whatever you're using or they wouldn't play full stop!

If they really are all skipping, it's either a case of them not liking the files you're having them play, or it's your drive producing low quality burns - making the disc hard to read - hence the slowdowns / skips / jumps.
__________________
The Official ImgBurn Website
LIGHTNING UK! is offline   Reply With Quote
Old 22 May 2007, 09:43 PM   #11
Who Farted?
 
locoeng's Avatar
 
Join Date: Dec 2005
Location: behind you
Posts: 2,509
Default

Quote:
@ locoeng - I always thought the lower speed the better and the dvd's are printable ,so no adhesive labels
Sorry must have missed this one, and I don't see where anyone else has addressed the question...

The "slower is better" philosophy has become a little outdated...with the introduction of quality drives using good firmware and you throw some quality media in the mix there is no reason why you shouldn't be able to burn at the recommended speed of the media with equal or better results. In some cases you will get worse results burning too slow...I would say 4X would be too slow.
locoeng is offline   Reply With Quote
Old 24 May 2007, 09:32 AM   #12
Junior Member
Junior Member
 
Join Date: Jul 2004
Posts: 34
Default

@ Dan
I also use TY discs

The thing that bothers me is i have 2 older cheap KOSS players that play these same discs with no problems

I think it might be time to get a new drive and its good to know i can actually burn at higher speeds

Thanks all for your help and insight
bigggt is offline   Reply With Quote
Old 24 May 2007, 11:18 AM   #13
Who Farted?
 
locoeng's Avatar
 
Join Date: Dec 2005
Location: behind you
Posts: 2,509
Default

Good luck and happy burning.
locoeng is offline   Reply With Quote
Old 24 May 2007, 12:02 PM   #14
Dan
Digital Video Master
Digital Video Master
 
Join Date: Dec 2005
Location: Ottawa
Posts: 1,029
Default

Quote:
Originally Posted by bigggt View Post
@ Dan
I think it might be time to get a new drive and its good to know i can actually burn at higher speeds
That might be a good idea.

Those HP burners seem to have a lot of problems. With good burners being so cheap, it is money well spent IMO.
Dan is offline   Reply With Quote
Old 28 May 2007, 10:13 AM   #15
Junior Member
Junior Member
 
Join Date: Jul 2004
Posts: 34
Default

Can anyone say if this is a good drive

http://www.blankmedia.ca/proddetail3.asp?id=1201

I think Chewy recommended Pioneer before

thanks
bigggt is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
ImgBurn 2.2 MrDaDa ImgBurn 5 16 Feb 2007 01:25 AM
imgburn lonewolf ImgBurn 10 29 Apr 2006 09:04 AM
ImgBurn help tabatha ImgBurn 17 22 Jan 2006 06:45 AM
Why use ImgBurn? hoopsrgreat ImgBurn 4 8 Jan 2006 08:45 AM



All times are GMT +10. The time now is 03:17 PM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2018 Digital Digest

Visit DivXLand   Visit dvdloc8.com