Digital Video Forums  

Go Back   Digital Video Forums > Software Forums > ImgBurn

Closed Thread
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 12 Oct 2009, 09:28 AM   #1
Junior Member
Junior Member
 
Join Date: Oct 2009
Posts: 1
Unhappy Yet another I/O Error

I've never installed or updated the driver/firmware for my BenQ DW1650 DVD-R drive, but now I think I may have to look for an update because I cannot burn any disks on it (programs such as ImgBurn give me errors when I try to write an image to a blank disk).

Would anyone here know what is the latest driver for the DW1650 SCSI? I've seen some sites host a driver updated in 2006, while some I've seen updated in 2009, hence I'm confused. And when I tried installing the firmware, it said that I already have the latest update.

Here is the full log:
Quote:
I 17:40:53 ImgBurn Version 2.5.0.0 started!
I 17:40:53 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3)
I 17:40:53 Total Physical Memory: 3,406,820 KB - Available: 2,504,184 KB
W 17:40:53 SPTD can have a detrimental effect on drive performance.
I 17:40:53 Initialising SPTI...
I 17:40:53 Searching for SCSI / ATAPI devices...
I 17:40:54 Found 1 DVD▒RW and 1 BD-ROM/HD DVD-ROM!
I 17:41:36 Operation Started!
I 17:41:36 Source File: C:\Documents and Settings\Tom\Desktop\faXcooL.Windows.7.Ultimate.EN G.x86-x64.ACTiVATED.iso
I 17:41:36 Source File Sectors: 1,823,885 (MODE1/2048)
I 17:41:36 Source File Size: 3,735,316,480 bytes
I 17:41:36 Source File Volume Identifier: CD_ROM
I 17:41:36 Source File Application Identifier: OSCDIMG 2.55 (01/01/2005 TM)
I 17:41:36 Source File File System(s): ISO9660 (Bootable)
I 17:41:36 Destination Device: [4:0:0] BENQ DVD DD DW1650 BCFC (D (RAID)
I 17:41:36 Destination Media Type: DVD-R (Disc ID: UME02) (Speeds: 4x, 8x, 12x, 16x)
I 17:41:36 Destination Media Sectors: 2,298,496
I 17:41:36 Write Mode: DVD
I 17:41:36 Write Type: DAO
I 17:41:36 Write Speed: 4x
I 17:41:36 Link Size: Auto
I 17:41:36 Lock Volume: Yes
I 17:41:36 Test Mode: No
I 17:41:36 OPC: No
I 17:41:36 BURN-Proof: Enabled
I 17:41:36 Advanced Settings - OverSpeed: No, Solid Burn (K/U): No / Yes, WOPC: Yes
I 17:41:37 Filling Buffer... (40 MB)
I 17:41:37 Writing LeadIn...
W 17:42:04 Failed to Write Sectors 0 - 31 - Reason: Write Error
W 17:42:04 Retrying (1 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (2 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (3 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (4 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (5 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (6 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (7 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (8 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (9 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (10 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (11 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (12 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (13 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (14 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (15 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (16 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (17 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (18 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (19 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
W 17:42:04 Retrying (20 of 20)...
W 17:42:04 Retry Failed - Reason: Invalid Address For Write
E 17:44:51 Failed to Write Sectors 0 - 31 - Reason: Write Error
E 17:44:51 Next Writable Address: 0
I 17:44:51 Synchronising Cache...
W 17:44:54 User opted to skip the 'Close Track/Session/Disc' functions.
E 17:44:54 Failed to Write Image!
E 17:44:54 Operation Failed! - Duration: 00:03:18
I 17:44:54 Average Write Rate: N/A - Maximum Write Rate: N/A
I 17:44:57 Close Request Acknowledged
I 17:44:57 Closing Down...
I 17:44:57 Shutting down SPTI...
I 17:44:57 ImgBurn closed!
Also, when I tried burning again, I get this log with ImgBurn:
Quote:
I 18:05:09 ImgBurn Version 2.5.0.0 started!
I 18:05:09 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3)
I 18:05:09 Total Physical Memory: 3,406,820 KB - Available: 2,517,204 KB
W 18:05:09 SPTD can have a detrimental effect on drive performance.
I 18:05:10 Initialising SPTI...
I 18:05:10 Searching for SCSI / ATAPI devices...
I 18:05:10 Found 1 DVD▒RW and 1 BD-ROM/HD DVD-ROM!
I 18:05:14 Operation Started!
I 18:05:14 Source File: C:\Documents and Settings\
I 18:05:14 Source File Sectors: 1,823,885 (MODE1/2048)
I 18:05:14 Source File Size: 3,735,316,480 bytes
I 18:05:14 Source File Volume Identifier: CD_ROM
I 18:05:14 Source File Application Identifier: OSCDIMG 2.55 (01/01/2005 TM)
I 18:05:14 Source File File System(s): ISO9660 (Bootable)
I 18:05:14 Destination Device: [4:0:0] BENQ DVD DD DW1650 BCFC (D (RAID)
I 18:05:14 Destination Media Type: DVD-R (Disc ID: UME02) (Speeds: 4x, 8x, 12x, 16x)
I 18:05:14 Destination Media Sectors: 1,823,888
I 18:05:14 Write Mode: DVD
I 18:05:14 Write Type: DAO
I 18:05:14 Write Speed: 4x
I 18:05:14 Link Size: Auto
I 18:05:14 Lock Volume: Yes
I 18:05:14 Test Mode: No
I 18:05:14 OPC: No
I 18:05:14 BURN-Proof: Enabled
I 18:05:14 Advanced Settings - OverSpeed: No, Solid Burn (K/U): No / Yes, WOPC: Yes
E 18:05:18 Failed to Reserve Track! - Reason: Invalid Field in Parameter List
E 18:05:19 Operation Failed! - Duration: 00:00:05
I 18:05:19 Average Write Rate: N/A - Maximum Write Rate: N/A
Any advice is appreciated, this has started to happen today suddenly and I am at a loss as to what I should do. Thanks.

I am running Windows XP MCE x86, Intel Q9400 Core 2 Quad @ 2.66Ghz, 4Gb DDR2 Kingston RAM, ASUS P5Q Motherboard.
tomirlik is offline  
Old 13 Oct 2009, 11:07 AM   #2
Lord of Digital Video
Lord of Digital Video
 
Join Date: Dec 2005
Posts: 1,500
Lightbulb

Hi Tomi,

I am not sure if anyone will repsond to this ... but with my limited knowledge ... here is the "Help" that I can offer you ... unless Chewy or Blutach come to your rescue ...

1) Your BCFC Firmware for DW1650 is about 2 firmware Older ... so that might make a difference ... but since BenQ has gone out of Business ... here is couple of websites that still hosting them ...

http://www.firmwarehq.com/BenQ/DW1650/files.html

Also here is the Dangerous Brothers "REGION FREE" version of these firmwares ...

http://tdb.rpc1.org/#DW1650

And below is a Digital Digest postings on "HOW TO for Firmwares" ...

http://forum.digital-digest.com/forumdisplay.php?f=167


2) Also another thing that you can try is to Revert back to ImgBurn 2.4.4.0 or earlier and see if that helps.

Post back your results please!

G!
gonwk is offline  
Old 13 Oct 2009, 05:42 PM   #3
Lord of Digital Video
Lord of Digital Video
 
doctorhardware's Avatar
 
Join Date: Dec 2006
Location: In the land of Ice & Snow
Posts: 1,907
Default

You need to use much better media then what you are using. Try using Verbatim or Tayo Yuden. Verbatim are good and the T Y are the best media you can get.
__________________
Star Baby Girl, Born March,1997 Died June 30th 2007 6:35 PM.

Last edited by doctorhardware; 27 Nov 2009 at 09:08 AM
doctorhardware is offline  
Old 27 Nov 2009, 08:53 AM   #4
Junior Member
Junior Member
 
Join Date: Nov 2009
Location: USA
Posts: 1
Default Yet another I/O Error

your first post yet you posted like you have been on here before.... mmmmmwhat coaching exp has he got???
ASquide is offline  
Old 27 Nov 2009, 09:30 AM   #5
Super Moderator
 
UncasMS's Avatar
 
Join Date: Nov 2001
Posts: 9,049
Default

Quote:
Originally Posted by ASquide View Post
your first post yet you posted like you have been on here before.... mmmmmwhat coaching exp has he got???
not enought it seems to stay away from asking questions dealing with burning an illegal windows 7 version


CLOSED
__________________
UncasMS is offline  
Closed Thread

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Imgburn - I/o Error - Worked On Several Dvds Before, Now Error Message. pink_candies ImgBurn 8 19 Jan 2007 12:19 PM
Power Calibration Area Error/ Session Fixation Error Hue983 DVD Blank Media, Burning, Recording Hardware 10 13 Dec 2006 05:59 AM
DVD Error Error Code: 8901000F An internal error has occurred. stinkfist DVD Encoding and Playback 1 18 Apr 2004 04:52 AM



All times are GMT +10. The time now is 12:36 AM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2018 Digital Digest

Visit DivXLand   Visit dvdloc8.com