Digital Video Forums  

Go Back   Digital Video Forums > Disc Formats > DVD Authoring and Editing

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 22 Jun 2004, 10:51 AM   #1
Junior Member
Junior Member
 
Join Date: Jun 2004
Location: Australia
Posts: 7
Post burn problem after encoding

I encoded PAL Region 4 Chitty Chitty Bang Bang Disc I(main film and some features) which took nearly 5 hours. I commenced burn and got over 75% then the disc eject with an error. The disc was OK and then I saw a screen that told me that at that point there was an Invalid CSS Code Error at this point. I played back the disc in the same drive and all the menus were there and could be activated and I could view all the Special Features(trailers, etc) and most of the film until the last 3 or 4 chapters when a read error clean disc error came up( this was not the problem).

I also have a problem in that I cannot use the saved file(the saved file has the same file name everytime that appeared after I sample anylised my first title but didn't encoded at that time. Can this be reused to burn a disc?

Finally, I burnt a disc from the orignal encoded burn of a title and it plays OK on the computer but on a Panasonic Recorder it throws up a U11 error code. On a Yamaha Chinese made machine it plays the copyright notices but then the interface of the machine comes back and a notice saying Home Use precludes the use of this disc. A friend had the same trouble with a disc he had dubbed from an encoded burn and then put in on a Chinese generic machine. It played.

My friend had suggest I use ROXIO Easy Creator to burn the file of two films and it did not work and I tried Pioneer's Record Now software and it burnt at the same time as ROXIO and then started the same time again as Verifying Disc(about 24 mins) but there was nothing on the discs and they were rendered useless. The third encoding of both originals produced complete burn copies.

Any help would be appreciated.

Ken H
MOVIESPAST is offline   Reply With Quote
Old 22 Jun 2004, 11:13 AM   #2
Retired
 
setarip's Avatar
 
Join Date: Dec 2001
Posts: 24,955
Default

"I encoded PAL Region 4 Chitty Chitty Bang Bang Disc I(main film and some features) which took nearly 5 hours."

Did you DECRYPT the DVD? If so, what software did you use?
setarip is offline   Reply With Quote
Old 22 Jun 2004, 02:04 PM   #3
Junior Member
Junior Member
 
Join Date: Jun 2004
Location: Australia
Posts: 7
Default

I use DVD Shrink as downloaded from a PC local magazine which ties up with Nero according to specs of the Shrink Program. I have had no such trouble with any other decrypting as described in my e-mail. I have encryted maybe 25 DVDs to date over the past two weeks.
MOVIESPAST is offline   Reply With Quote
Old 22 Jun 2004, 02:16 PM   #4
Retired
 
setarip's Avatar
 
Join Date: Dec 2001
Posts: 24,955
Default

Try the following:

Use DVD Decrypter to "rip" the ORIGINAL (commercial) DVD to your hard drive in "File" mode - and from the "Edit" dropdown menu, select "All files" (NOT "movie files").

Then use DVD Shrink to "Open files" (NOT "Open Disk") - and select "VIDEO_TS.IFO"
setarip is offline   Reply With Quote
Old 24 Jun 2004, 05:34 PM   #5
Junior Member
Junior Member
 
Join Date: Jun 2004
Location: Australia
Posts: 7
Default

June 24 2004 Thanks. I went to my DVD Decrypter software and started the job with 6 files listed. Halfway thru I decided to sop and went to the site where I updated to the later version then started again. This time I had 19 files and after nearly 3 hours I had finsihed the job(over 7GB of files). This morning I followed your instructions and opened file and it took about 6mins to analyise and then Backup started off a fast 1600 plus kb/s and averaged over 1300 kb/s and it was all over in less than 50mins. Writing to disc was about 4.4GB and then usual 2x(2770kb) came up but this took about 3 times longer than usual to burn.

Now to get a Region Free program that allows both my drives to run all Region Codes. The disc above had 2&4 which the new download told me. My DVD-ROM is locked at 1 and the DVD-burner is locked at 4 but I really need access to Region 2 as well. Any thing out there?
Ken
MOVIESPAST is offline   Reply With Quote
Old 25 Jun 2004, 09:26 AM   #6
Retired
 
setarip's Avatar
 
Join Date: Dec 2001
Posts: 24,955
Default

"Thanks."

My pleasure ;>}
setarip is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off




All times are GMT +10. The time now is 06:21 AM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2018 Digital Digest

Visit DivXLand   Visit dvdloc8.com