Digital Video Forums  

Go Back   Digital Video Forums > Other > Archive (Closed) > Nero Recode

 
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 31 Oct 2006, 01:16 AM   #1
Junior Member
Junior Member
 
Join Date: Sep 2006
Posts: 25
Default Nero Recode "unexpected exception"

I'm attaching my Recode log in hopes someone might see something I can't. I've seen some answers given out here that makes me think we have some brilliance available on the subject. I've used Recode before with no probs until yesterday when trying to burn a backup. Had to go back to other progs in my arsenal to get it done, but as Recode is a "PAID FOR" program and not a freebie....I want what I paid for! Any help will be truly appreciated! I did notice that when I have the size set to 4300, the log shows it being set to almost 4466. Wouldn't think this is too close to the edge.
********** Nero Recode **********

Version: 2.3.2.0



Project type: Main Movie to DVD
Target size: Custom (2201600)

09:46:50 File LangStreamPatcher.cpp, Line 56
Command table patching started...

09:46:50 File LangStreamPatcher.cpp, Line 135
All tables successfully patched!

Burn settings:
Target: HL-DT-ST DVDRAM GSA-4163B
Number of copies: 1
Write speed: 5540 KB/s
Temp folder: C:\Documents and Settings\Don\My Documents\Nero Recode (52465082368 bytes free)
Direct burning: true
Target media: DVD R/RW, DVD R DL, DVD-RAM
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false

09:47:08 File burn_dvdfiles.cpp, Line 238
Compile DVD: init

VTS_01 Title Vobs [14212 vobus] 6012.80MB -> 4299.85MB [R 0.48]
Video: 3673.48MB, extra: 626.37MB
Audio: 3 streams
0. 0. Dolby Digital 5.1-ch English 410.78MB [enabled]
1. 1. Dolby Digital 5.1-ch French 411.54MB [disabled]
2. 2. Dolby Digital 2-ch English 177.43MB [enabled]
Subpicture: 3 streams
0. 0. English 10.41MB [enabled]
1. 1. Spanish 8.56MB [disabled]
2. 2. French 3.29MB [disabled]

09:47:08 File burn_dvdfiles.cpp, Line 1245
Compile DVD: begin copy 1

09:47:08 File NeroRecorderBase.cpp, Line 517
Writing to disc: D

09:47:09 File NeroRecorderBase.cpp, Line 531
Free capacity on disc: 2286467 sectors (2298496)

09:47:09 File burn_dvdfiles.cpp, Line 549
Compile DVD: burning 2286467 sectors (2201600 required)

09:47:09 File burn_dvdfiles.cpp, Line 745
Compile DVD: adjust target size to 4465.76MB (4465.76MB obtained)

09:47:09 File burn_dvdfiles.cpp, Line 595
Compiling DVD Volume started

09:47:10 File vob_record.cpp, Line 647
DirectBurn offset: VTS_01_1.VOB 112

09:59:29 File burn_dvdfiles.cpp, Line 1151
Compile DVD: finished VTS_01 Title Vobs

VTS_01 Title Vobs:
Original 6012.80MB -> Expected 4465.60MB -> Output 4465.60MB
Finished error -0.00MB
Ratio encoded = 14212
Original encoded = 0
Slide encoded = 0
StillImage encoded = 0
Output extra size = 618.16MB
Source video size = 4979.47MB
Pictures Modified [I 9628] [P 6117] [B 107883]

09:59:36 File dvd_record.cpp, Line 424
DirectBurn offset: VTS_01_0.IFO 48


09:59:44 File NeroRecorder.cpp, Line 728
Burn failed (3)

----- Begin NeroAPI error log -----



Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero API version: 7.5.7.0
Using interface version: 7.0.5.6
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Recode
Internal Version: 7, 5, 7, 0

Recorder: <hl-dt-st dvdram="" gsa-4163b="">Version: A106 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <ide> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC AC33200L atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP CD-Writer+ 8100 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B D: CDRom0
HP CD-Writer+ 8100 E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048096kB)
Free physical memory: 687MB (703500kB)
Memory in use : 32
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

30.10.2006
NeroAPI
9:47:09 AM #1 Text 0 File SCSIPassThrough.cpp, Line 583
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

9:47:09 AM #2 Text 0 File DlgWaitCD.cpp, Line 301
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: -1 ( 0:00.-1, 0MB)

9:47:09 AM #3 Text 0 File DlgWaitCD.cpp, Line 313
Write in overburning mode: NO

9:47:09 AM #4 Text 0 File DlgWaitCD.cpp, Line 2863
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193

9:47:09 AM #5 Text 0 File DlgWaitCD.cpp, Line 485
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:47:09 AM #6 Text 0 File SCSIPassThrough.cpp, Line 41
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

9:47:09 AM #7 Text 0 File BurnAtOnceRecorder.cpp, Line 1010
Estimated filesystem size: 544

9:47:09 AM #8 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 4x (5,540 KB/s)

9:47:10 AM #9 Text 0 File DVDR.cpp, Line 3026
Recording mode: Sequential Recording Mode for Multisession

9:47:10 AM #10 Text 0 File DVDR.cpp, Line 3182
Start write address at LBA 0
DVD high compatibility mode: No

9:47:10 AM #11 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:47:10 AM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 677
Reserved fragment at 0. Length: 592

9:47:10 AM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 1892
Reserved start fragment at 0

9:47:10 AM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 677
Reserved fragment at 592. Length: 64

9:47:10 AM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 1409
Writing VTS_01_1.VOB at sector 656

9:50:04 AM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 2675
Finished writing file VTS_01_1.VOB of size 1073739776 bytes (524287 sectors)

9:50:04 AM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 2286
Added extra file VTS_01_2.VOB

9:50:04 AM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 1409
Writing VTS_01_2.VOB at sector 524943

9:52:57 AM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 2675
Finished writing file VTS_01_2.VOB of size 1073739776 bytes (524287 sectors)

9:52:57 AM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 2286
Added extra file VTS_01_3.VOB

9:52:57 AM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 1409
Writing VTS_01_3.VOB at sector 1049230

9:55:44 AM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 2675
Finished writing file VTS_01_3.VOB of size 1073739776 bytes (524287 sectors)

9:55:44 AM #23 Text 0 File BurnAtOnceRecorder.cpp, Line 2286
Added extra file VTS_01_4.VOB

9:55:44 AM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 1409
Writing VTS_01_4.VOB at sector 1573517

9:58:38 AM #25 Text 0 File BurnAtOnceRecorder.cpp, Line 2675
Finished writing file VTS_01_4.VOB of size 1073739776 bytes (524287 sectors)

9:58:38 AM #26 Text 0 File BurnAtOnceRecorder.cpp, Line 2286
Added extra file VTS_01_5.VOB

9:58:38 AM #27 Text 0 File BurnAtOnceRecorder.cpp, Line 1409
Writing VTS_01_5.VOB at sector 2097804

9:59:36 AM #28 Text 0 File BurnAtOnceRecorder.cpp, Line 2675
Finished writing file VTS_01_5.VOB of size 387563520 bytes (189240 sectors)

9:59:36 AM #29 Text 0 File BurnAtOnceRecorder.cpp, Line 1409
Writing VTS_01_0.BUP at sector 2287044

9:59:36 AM #30 Text 0 File BurnAtOnceRecorder.cpp, Line 2675
Finished writing file VTS_01_0.BUP of size 73728 bytes (36 sectors)

9:59:40 AM #31 Text 0 File BurnAtOnceRecorder.cpp, Line 1409
Writing VTS_01_0.IFO at sector 592

9:59:44 AM #32 Text 0 File BurnAtOnceRecorder.cpp, Line 2655
Successfully released fragment at 592

9:59:44 AM #33 Text 0 File BurnAtOnceRecorder.cpp, Line 2675
Finished writing file VTS_01_0.IFO of size 73728 bytes (36 sectors)

9:59:44 AM #34 Text 0 File BurnAtOnceRecorder.cpp, Line 1415
Buffering VIDEO_TS.IFO

9:59:44 AM #35 Text 0 File BurnAtOnceRecorder.cpp, Line 2617
Finished buffering file VIDEO_TS.IFO of size 6144 bytes (3 sectors)

9:59:44 AM #36 Text 0 File BurnAtOnceRecorder.cpp, Line 2675
Finished writing file VIDEO_TS.IFO of size 6144 bytes (3 sectors)

9:59:44 AM #37 Text 0 File BurnAtOnceRecorder.cpp, Line 1415
Buffering VIDEO_TS.BUP

9:59:44 AM #38 Text 0 File BurnAtOnceRecorder.cpp, Line 2617
Finished buffering file VIDEO_TS.BUP of size 6144 bytes (3 sectors)

9:59:44 AM #39 Text 0 File BurnAtOnceRecorder.cpp, Line 2675
Finished writing file VIDEO_TS.BUP of size 6144 bytes (3 sectors)

9:59:44 AM #40 Text 0 File APIBurnAtOnce.cpp, Line 337
Unexpected exception

9:59:44 AM #41 Text 0 File BurnAtOnceRecorder.cpp, Line 3680
Disc info:
Partitions: 0

9:59:48 AM #42 Text 0 File SCSIPassThrough.cpp, Line 583
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

9:59:48 AM #43 Text 0 File Cdrdrv.cpp, Line 10459
DriveLocker: UnLockVolume completed

9:59:54 AM #44 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 5:16:24 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/24/2006 11:47:00 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


----- End NeroAPI error log -----


09:59:54 File burn_dvdfiles.cpp, Line 308
Compile DVD: exit
corporallouis is offline  
Old 31 Oct 2006, 07:04 AM   #2
Super Moderatress
 
cynthia's Avatar
 
Join Date: Jan 2004
Location: Sweden
Posts: 14,278
Default

Have you tried to output the compilation to the hard disk first and then burn it. Just to rule out any burning related issues.
__________________
cynthia is offline  
Old 31 Oct 2006, 07:48 AM   #3
Junior Member
Junior Member
 
Join Date: Sep 2006
Posts: 25
Default

I have used a decrypter to get the video files onto my hard drive. I can import these files into Recode and watch them in the preview box. Unfortunately, they'll look like they're burning right up until the bitter end and Nero coughs up a "burn failed". I can dump these same files into Shrink and it burns perfectly. Whatever is causing Recode to fail is beyond my understanding. Previously, I could import the files, tell it to recode main movie to DVD and sit back and wait. No new programs, hardware added to cause this new problem. A reply figured I had Roxio crap leftover in the recesses of my computer, but if so, it's been there for a long time and has never caused a problem before. Maybe I'll drop back to my previous stable version of Nero to see if that helps. Thanks for the reply.
corporallouis is offline  
Old 31 Oct 2006, 10:16 AM   #4
Super Moderatress
 
cynthia's Avatar
 
Join Date: Jan 2004
Location: Sweden
Posts: 14,278
Default

What version of Nero Recode do you use?
cynthia is offline  
Old 31 Oct 2006, 10:33 AM   #5
Junior Member
Junior Member
 
Join Date: Sep 2006
Posts: 25
Default

Hi Cynthia....I'm using Nero 7.5.7.0 now. This problem just happened in the last couple of days, so I don't know if something "popped" somewhere or what. I've had the current Nero installed since it came out and only had a minor glitch in Wave Editor until now. I'm going to try a check in the morning of your earlier suggestion to rule out a burner problem or a compression fault within Nero Recode. I might even try a fresh install to see if that might help if the other doesn't work out. Appreciate the help.....
corporallouis is offline  
Old 31 Oct 2006, 10:48 AM   #6
Lord of Digital Video
Lord of Digital Video
 
Gary D's Avatar
 
Join Date: Dec 2005
Location: Canada-eh?
Posts: 2,266
Default

Quote:
Originally Posted by corporallouis View Post
I have used a decrypter to get the video files onto my hard drive. I can import these files into Recode and watch them in the preview box. Unfortunately, they'll look like they're burning right up until the bitter end and Nero coughs up a "burn failed". I can dump these same files into Shrink and it burns perfectly. Whatever is causing Recode to fail is beyond my understanding. Previously, I could import the files, tell it to recode main movie to DVD and sit back and wait. No new programs, hardware added to cause this new problem. A reply figured I had Roxio crap leftover in the recesses of my computer, but if so, it's been there for a long time and has never caused a problem before. Maybe I'll drop back to my previous stable version of Nero to see if that helps. Thanks for the reply.
Quote:
Originally Posted by Nerolog
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 5:16:24 PM
Use Roxio Zap to get rid of it LINK: http://www.softpedia.com/get/Tweak/U...oxio-Zap.shtml
Gary D is offline  
Old 1 Nov 2006, 03:55 AM   #7
Junior Member
Junior Member
 
Join Date: Sep 2006
Posts: 25
Default

Gary D said:

"Originally Posted by Nerolog
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 5:16:24 PM
Use Roxio Zap to get rid of it LINK: http://www.softpedia.com/get/Tweak/U...oxio-Zap.shtml "

Did that.... and unchecked Nero Burn at Once function as suggested on another forum. Have done three movies using Recode with NO problems so far . Looks like Recode doesn't like to do BAO on decrypted movies. I like Recode as it is much faster than Shrink even if I'm not using Burn at Once.
Thanks everyone for the help....seems to have gotten it!
corporallouis is offline  
Old 3 Nov 2006, 02:36 AM   #8
Junior Member
Junior Member
 
Join Date: Oct 2006
Posts: 6
Default

I had the same problem too, it just happened since yesterday. I try to use DVD Shrink instead of Nero Recode and it still has the same problem.

I thought I don't have enough memmory so I double the memory but still can't back up my DVD.
NguNgu is offline  
Old 3 Nov 2006, 02:47 AM   #9
Junior Member
Junior Member
 
Join Date: Oct 2006
Posts: 6
Default

Corpo, how did you do it, please show me, I download the Roxio thingy, but still Nero Recode couldn't even open the movie.
NguNgu is offline  
Old 3 Nov 2006, 02:48 AM   #10
Junior Member
Junior Member
 
Join Date: Sep 2006
Posts: 25
Default

Could you post a log of some sort so folks can see where the problem might be? Have you changed brands of discs, changed the burning speed? Right now we're pretty well in the dark as to what the solution might be.
corporallouis is offline  
Old 3 Nov 2006, 02:59 AM   #11
Junior Member
Junior Member
 
Join Date: Oct 2006
Posts: 6
Default

I had this problem at home, so I bring the movies to work to burn them. I burned the first one successfully but then after that I had the same problem like I had at home. Here is the history log for today

2.11.2006
NeroAPI
9:04:31 AM #1 Phase 112 File APIProgress.cpp, Line 275
DVD-Video files reallocation started

9:04:31 AM #2 Phase 114 File APIProgress.cpp, Line 275
DVD-Video files reallocation completed (no file modified)

9:04:31 AM #3 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted

9:04:31 AM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

9:04:31 AM #5 Text 0 File Reader.cpp, Line 124
Reader running

9:04:31 AM #6 Text 0 File Writer.cpp, Line 122
Writer Memorex DVD16+/-DL4RWlD2 running

9:04:31 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

9:04:31 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

9:04:31 AM #9 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

9:04:32 AM #10 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2283631 (507:28.31, 4460MB)

9:04:32 AM #11 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

9:04:32 AM #12 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: Memorex DVD16+/-DL4RWlD2, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

9:04:32 AM #13 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:04:32 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2283632 (2283632) = #2283632/507:28.32
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283632 blocks [Memorex DVD16+/-DL4RWlD2]
--------------------------------------------------------------

9:04:32 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Memorex DVD16+/-DL4RWlD2] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4676878336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2283632 | lead-out | 1 | 0x41 | 0x00

9:04:32 AM #16 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

9:04:32 AM #17 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

9:04:32 AM #18 Phase 24 File APIProgress.cpp, Line 275
Caching of files started

9:04:32 AM #19 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

9:04:32 AM #20 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed

9:04:32 AM #21 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 8x (11,080 KB/s)

9:04:32 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:04:32 AM #23 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: E01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

9:04:32 AM #24 Text 0 File DVDR.cpp, Line 6036
Drive: Memorex DVD16+/-DL4RWlD2
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0

9:04:32 AM #25 CDR -1207 File DVDR.cpp, Line 5463
Book Type automatically set to: DVD-ROM

9:04:32 AM #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

9:12:54 AM #27 Text 0 File WriterStatus.cpp, Line 116
<Memorex DVD16+/-DL4RWlD2> start writing Lead-Out at LBA 2283632 (22D870h), lenght 0 blocks

9:12:54 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:13:20 AM #29 Text 0 File DVDR.cpp, Line 6036
Drive: Memorex DVD16+/-DL4RWlD2
Book Type request [LO], rev 1: DVD+R
Changing the Book Type was finished successfully, return code 0

9:13:20 AM #30 Phase 37 File APIProgress.cpp, Line 275
Burn process completed successfully at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 3/31/2003 5:00:00 AM
File 'Drivers\CDRALW2K.SYS': Ver=6.1.1.17 , size=24698 bytes, created 7/17/2003 12:19:56 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 3:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 7, 3, size=98176 bytes, created 11/26/2004 12:36:24 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 7, 3, size=28928 bytes, created 11/26/2004 12:36:06 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 7, 3, size=7808 bytes, created 11/26/2004 12:36:26 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** NeroAPI, History File *** ======
NguNgu is offline  
Old 3 Nov 2006, 03:07 AM   #12
Junior Member
Junior Member
 
Join Date: Oct 2006
Posts: 6
Default

Well in the history log it doesn't say anything about the problem. Maybe when I go home, I'll see if I have the problem show in the history log.

Here how the screen pop up when I try to import the DVD

NguNgu is offline  
Old 3 Nov 2006, 03:13 AM   #13
Junior Member
Junior Member
 
Join Date: Sep 2006
Posts: 25
Default

First of all I see you're using CMC MAGS.....worst possible disc to use - sold under many brand names. Try using a Verbatim or Taiyo Yuden if you can find them.
Try burning at 4X. speed. Some folks use no faster even though you can burn much faster. Unless you use Nero InCD GET RID OF IT! It is a horrible POS that causes many problems. Drivers\CDRALW2K.SYS is a Roxio driver. If you do have Roxio installed it will cause problems with Nero. If you uninstalled it, run the Roxio Zapper in the previous posts to get rid of it. There are several useless drivers in the log that are probably causing the problems. Let us know if this helps.
corporallouis is offline  
Old 3 Nov 2006, 03:55 AM   #14
Junior Member
Junior Member
 
Join Date: Sep 2006
Posts: 25
Default

As I was writing my reply you posted another message and I wasn't aware of it. The log must be of the successful burn. Are you asking Recode to burn the file again after the burn that turned out O.K. or is it a new file you're importing when you get the message? The other suggestions above are still valid for the original burn, and I also notice your fit to target box is set to DVD-5. Most folks suggest setting a custom size of 4300 - 4400 to make sure not to burn too close to the edge. This still won't solve your problem with Recode, but might get you a better burn. I know people have problems burning the same video files twice ( making duplicate copies). Nero is really delicate and the least little thing will bugger up the thing. I'll do some more digging and see what I can find and maybe some other brighter mind will chime in to help.
corporallouis is offline  
Old 3 Nov 2006, 04:01 AM   #15
Junior Member
Junior Member
 
Join Date: Oct 2006
Posts: 6
Default

No I didn't ask it burn again, I was burning a new files. And that's all it pop up. I mean I've tried 2 different movies after the 1st sucessful one. One I could open the movie, then when it recode around 40% that thing pop up. The other, I could not even import the movie.

I am gonna try your solutions at home tonight and see if it works. I don't have roxio at home. At work I can install but can't remove.

Thank you for your helps
NguNgu is offline  
 

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
"MultiRecode" is HERE! Small tool that enables Nero Recode batch processing! Alex7718 Nero Recode 6 20 Apr 2007 09:22 PM
"Multishrink" for Nero Recode, (batch processing).... Alex7718 Nero Recode 17 9 May 2006 02:44 PM
"Mixed-compression" in Nero Recode ? grootelulu Nero Recode 2 10 May 2005 04:27 PM
Unexpected Exception Nero 5.5.8.2 anish General Discussions 1 27 May 2002 08:07 AM



All times are GMT +10. The time now is 07:11 PM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2018 Digital Digest

Visit DivXLand   Visit dvdloc8.com