Digital Video Forums  

Go Back   Digital Video Forums > Other > Archive (Closed) > Nero Recode

 
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 14 Dec 2006, 02:24 PM   #1
Junior Member
Junior Member
 
Join Date: Dec 2006
Posts: 4
Angry VERY frustrated

I've backed up quite a few of my DVDs, however, a few weeks ago Nero would just stop burning. It gets to 2.9% and says that the burn process failed. I've tried everything I've read on the forums. I've tried burning at all sorts of speeds, resizing the DVD, turning off burn at once, turning on burn at once, DMCA reset, been using the same DVDs so the brand shouldn't have anything to do with it plus I've tried many of the same brand, still doesn't work and used the program that reset your region counter. I've run out of ideas and cannot understand why. I appreciate any and all help Here's the error log:

Version: 2.3.7.0
Project type: Copy entire DVD
Target size: DVD5 (2282925)

23:18:55 File LangStreamPatcher.cpp, Line 56
Command table patching started...

23:18:55 File LangStreamPatcher.cpp, Line 135
All tables successfully patched!

Burn settings:
Target: SONY DVD RW DW-U12A
Number of copies: 1
Write speed: 1385 KB/s
Temp folder: C:\Documents and Settings\Owner\My Documents\Nero Recode (6413643776 bytes free)
Direct burning: true
Target media: DVD R/RW, DVD R DL, DVD-RAM
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false

23:19:00 File burn_dvdfiles.cpp, Line 238
Compile DVD: init

VTS_01 Menus Vobs [134 vobus] 2.07MB -> 2.03MB [R 0.61]
Video: 0.22MB, extra: 1.81MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 1.53MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.02MB [enabled]

VTS_01 Title Vobs [18452 vobus] 4442.03MB -> 4440.96MB [R 1.00]
Video: 4188.58MB, extra: 252.38MB
Audio: 1 streams
0. 0. Dolby Digital 1-ch English 209.27MB [enabled]
Subpicture: 1 streams
0. 0. French 7.08MB [enabled]

VTS_02 Title Vobs [74 vobus] 19.63MB -> 15.58MB [R 0.61]
Video: 15.43MB, extra: 0.14MB
Audio: 0 streams
Subpicture: 0 streams

23:19:00 File burn_dvdfiles.cpp, Line 1245
Compile DVD: begin copy 1

23:19:00 File NeroRecorderBase.cpp, Line 517
Writing to disc: D

23:19:00 File NeroRecorderBase.cpp, Line 531
Free capacity on disc: 2286462 sectors (2298496)

23:19:01 File burn_dvdfiles.cpp, Line 549
Compile DVD: burning 2286462 sectors (2282926 required)

23:19:01 File burn_dvdfiles.cpp, Line 745
Compile DVD: adjust target size to 4465.75MB (4464.00MB obtained)

23:19:01 File burn_dvdfiles.cpp, Line 595
Compiling DVD Volume started

23:19:01 File burn_dvdfiles.cpp, Line 1151
Compile DVD: finished VTS_01 Menus Vobs

VTS_01 Menus Vobs:
Original 2.07MB -> Expected 2.07MB -> Output 2.07MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 134
Slide encoded = 0
StillImage encoded = 0
Output extra size = 1.81MB
Source video size = 0.26MB
Pictures Modified [I 0] [P 0] [B 0]

23:19:01 File vob_record.cpp, Line 647
DirectBurn offset: VTS_01_0.VOB 128

23:19:02 File vob_record.cpp, Line 647
DirectBurn offset: VTS_01_1.VOB 1188

23:20:02 File NeroRecorder.cpp, Line 675
Burn failed (3)

----- Begin NeroAPI error log -----


Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero API version: 7.5.9.0
Using interface version: 7.0.5.6
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Recode
Internal Version: 7, 5, 9, 0

Recorder: <sony dvd="" rw="" dw-u12a=""> Version: 2.0d - HA 1 TA 0 - 7.5.9.0
Adapter driver: <ide> HA 1
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200BB-98DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-U12A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S400/A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 1 DMA: Off
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 2 DMA: Off
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 3 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DW-U12A E: CDRom0
ASUS CD-S400/A F: CDRom1
NZ3059S RBE105G G: CDRom2
NZ3059S RBE105G H: CDRom3
NZ3059S RBE105G I: CDRom4
NZ3059S RBE105G J: CDRom5
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 39845888 (0) Byte
BUFE : 0
Physical memory : 247MB (253460kB)
Free physical memory: 121MB (124652kB)
Memory in use : 50
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.12.2006
NeroAPI
11:19:00 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

11:19:01 PM #2 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: -1 ( 0:00.-1, 0MB)

11:19:01 PM #3 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO

11:19:01 PM #4 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: SONY DVD RW DW-U12A, Media type: DVD-R
Disc Manufacturer: Prodis - cF02
Disc Application Code: 64, Disc Physical Code: 193

11:19:01 PM #5 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:19:01 PM #6 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:19:01 PM #7 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 CC 00 01
Buffer x086e2040: Len x648

11:19:01 PM #8 Text 0 File BurnAtOnceRecorder.cpp, Line 1010
Estimated filesystem size: 544

11:19:01 PM #9 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 1x (1,385 KB/s)

11:19:01 PM #10 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 CC 00 01
Buffer x0459d940: Len x648

11:19:01 PM #11 Text 0 File DVDR.cpp, Line 3058
Recording mode: Sequential Recording Mode for Multisession

11:19:01 PM #12 Text 0 File DVDR.cpp, Line 3214
Start write address at LBA 0
DVD high compatibility mode: No

11:19:01 PM #13 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 CC 00 01
Buffer x0459d940: Len x648

11:19:01 PM #14 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified=""> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:19:01 PM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 677
Reserved fragment at 0. Length: 592

11:19:01 PM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 1892
Reserved start fragment at 0

11:19:01 PM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 677
Reserved fragment at 592. Length: 80

11:19:01 PM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 1409
Writing VTS_01_0.VOB at sector 672

11:19:01 PM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 2675
Finished writing file VTS_01_0.VOB of size 2170880 bytes (1060 sectors)

11:19:02 PM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 1409
Writing VTS_01_1.VOB at sector 1732

11:20:02 PM #21 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 0B 60 00 00 20 00 00 00
Sense Area: 0xF1 00 03 FF FD 00 00 12 00 00 00 00 73 03
Buffer x087d70c0: Len x10000
0x00 00 01 BA 44 00 76 77 B4 4F 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 21 F0 67 00 1B 0A B3 63 94
0x25 7C 0E 51 54 F9 FC AA 2A 8F 16 DB 99 11 A0 20

11:20:02 PM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 2218
Failed to write 128 sectors at 2880

11:20:02 PM #23 Phase 179 File APIProgress.cpp, Line 282
Writing file to disc failed

11:20:03 PM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 3680
Disc info:
Partitions: 2
#0: Start: 0, Size: 576
#1: Start: 592, Size: 64

11:20:03 PM #25 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:20:03 PM #26 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

11:20:03 PM #27 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed

11:20:07 PM #28 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 1x (1,385 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/24/2006 10:47:00 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/24/2006 10:47:00 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


----- End NeroAPI error log -----


23:20:15 File burn_dvdfiles.cpp, Line 308
Compile DVD: exit</not></ide></sony>
nox4444 is offline  
Old 14 Dec 2006, 04:02 PM   #2
Digital Video Master
Digital Video Master
 
benbryant's Avatar
 
Join Date: Aug 2005
Location: Oahu Hawaii USA
Posts: 1,314
Default

Quote:
Recorder: <sony dvd="" rw="" dw-u12a=""> Version: 2.0d - HA 1 TA 0 - 7.5.9.0
The firmware version 2.0d seems to be old enough to cause the burning problem. Please update to the newer one - 2.0e from the link below:

http://forum.rpc1.org/dl_file.php?si...DWU12A_20e.exe

Regards
benbryant is offline  
Old 14 Dec 2006, 04:14 PM   #3
Queen of Digital Video
Queen of Digital Video
 
photo_angel2004's Avatar
 
Join Date: Jan 2004
Location: Middle Earth USA
Posts: 3,558
Default




After you update your firmware like benbryant has sugested.

You may want to try burning with IMGburn its free and awesome for burning your backups. If you want to try it the link is in my sig.
__________________






IMGburn ** ** Nero 6.6.0.18 **Intelli Type Pro 6.1 **
photo_angel2004 is offline  
Old 14 Dec 2006, 09:42 PM   #4
Junior Member
Junior Member
 
Join Date: Dec 2006
Posts: 4
Default

I just updated my firmware... thanks for that by the way at least its running on the latest firmware but it's still not burning This caught my eye when going through my old report
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200BB-98DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-U12A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S400/A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 1 DMA: Off
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 2 DMA: Off
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 3 DMA: Off

it looks like the DMA isn't correct (either on or off) in some places so I'm wondering if thats it even though i checked it and both IDE drivers are DMA only. Anyway here's the new report:
Project type: Copy entire DVD
Target size: DVD5 (2282925)

06:35:41 File burn_dvdfiles.cpp, Line 467
Compile DVD: Cancel

Burn settings:
Target: SONY DVD RW DW-U12A
Number of copies: 1
Write speed: 5540 KB/s
Temp folder: C:\Documents and Settings\Owner\My Documents\Nero Recode (6506418176 bytes free)
Direct burning: true
Target media: DVD R/RW, DVD R DL, DVD-RAM
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false

06:35:47 File burn_dvdfiles.cpp, Line 238
Compile DVD: init

VTS_01 Menus Vobs [134 vobus] 2.07MB -> 2.07MB [R 1.00]
Video: 0.26MB, extra: 1.81MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 1.53MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.02MB [enabled]

VTS_01 Title Vobs [18452 vobus] 4442.03MB -> 4442.03MB [R 1.00]
Video: 4189.65MB, extra: 252.38MB
Audio: 1 streams
0. 0. Dolby Digital 1-ch English 209.27MB [enabled]
Subpicture: 1 streams
0. 0. French 7.08MB [enabled]

VTS_02 Title Vobs [74 vobus] 19.63MB -> 19.63MB [R 1.00]
Video: 19.48MB, extra: 0.14MB
Audio: 0 streams
Subpicture: 0 streams

06:35:47 File burn_dvdfiles.cpp, Line 1245
Compile DVD: begin copy 1

06:35:48 File NeroRecorderBase.cpp, Line 517
Writing to disc: D

06:35:48 File NeroRecorderBase.cpp, Line 531
Free capacity on disc: 2286460 sectors (2298496)

06:35:49 File burn_dvdfiles.cpp, Line 549
Compile DVD: burning 2286460 sectors (2285568 required)

06:35:49 File burn_dvdfiles.cpp, Line 745
Compile DVD: adjust target size to 4465.74MB (4464.00MB obtained)

06:35:49 File burn_dvdfiles.cpp, Line 595
Compiling DVD Volume started

06:35:49 File burn_dvdfiles.cpp, Line 1151
Compile DVD: finished VTS_01 Menus Vobs

VTS_01 Menus Vobs:
Original 2.07MB -> Expected 2.07MB -> Output 2.07MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 134
Slide encoded = 0
StillImage encoded = 0
Output extra size = 1.81MB
Source video size = 0.26MB
Pictures Modified [I 0] [P 0] [B 0]

06:35:49 File vob_record.cpp, Line 647
DirectBurn offset: VTS_01_0.VOB 128

06:35:50 File vob_record.cpp, Line 647
DirectBurn offset: VTS_01_1.VOB 1188

06:36:37 File NeroRecorder.cpp, Line 675
Burn failed (3)

----- Begin NeroAPI error log -----


Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero API version: 7.5.9.0
Using interface version: 7.0.5.6
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Recode
Internal Version: 7, 5, 9, 0

Recorder: <SONY DVD RW DW-U12A> Version: 2.0e - HA 1 TA 7 - 7.5.9.0
Adapter driver: <IDE> HA 1
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200BB-98DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-U12A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S400/A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 1 DMA: Off
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 2 DMA: Off
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 3 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DW-U12A E: CDRom7
ASUS CD-S400/A F: CDRom1
NZ3059S RBE105G G: CDRom2
NZ3059S RBE105G H: CDRom3
NZ3059S RBE105G I: CDRom4
NZ3059S RBE105G J: CDRom5
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 39845888 (0) Byte
BUFE : 0
Physical memory : 247MB (253460kB)
Free physical memory: 131MB (134200kB)
Memory in use : 47
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.12.2006
NeroAPI
6:35:48 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

6:35:48 AM #2 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: -1 ( 0:00.-1, 0MB)

6:35:48 AM #3 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO

6:35:48 AM #4 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: SONY DVD RW DW-U12A, Media type: DVD-R
Disc Manufacturer: Prodis - cF02
Disc Application Code: 64, Disc Physical Code: 193

6:35:48 AM #5 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:35:48 AM #6 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

6:35:48 AM #7 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom7: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 CC 00 01
Buffer x087866c0: Len x648

6:35:49 AM #8 Text 0 File BurnAtOnceRecorder.cpp, Line 1010
Estimated filesystem size: 544

6:35:49 AM #9 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 4x (5,540 KB/s)

6:35:49 AM #10 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom7: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 CC 00 01
Buffer x087866c0: Len x648

6:35:49 AM #11 Text 0 File DVDR.cpp, Line 3058
Recording mode: Sequential Recording Mode for Multisession

6:35:49 AM #12 Text 0 File DVDR.cpp, Line 3214
Start write address at LBA 0
DVD high compatibility mode: No

6:35:49 AM #13 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom7: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 CC 00 01
Buffer x087866c0: Len x648

6:35:49 AM #14 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

6:35:49 AM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 677
Reserved fragment at 0. Length: 592

6:35:49 AM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 1892
Reserved start fragment at 0

6:35:49 AM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 677
Reserved fragment at 592. Length: 80

6:35:49 AM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 1409
Writing VTS_01_0.VOB at sector 672

6:35:50 AM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 2675
Finished writing file VTS_01_0.VOB of size 2170880 bytes (1060 sectors)

6:35:50 AM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 1409
Writing VTS_01_1.VOB at sector 1732

6:36:36 AM #21 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom7: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 0B 60 00 00 20 00 00 00
Sense Area: 0xF1 00 03 FF FD 00 00 12 00 00 00 00 73 03
Buffer x086ce040: Len x10000
0x00 00 01 BA 44 00 76 77 B4 4F 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 21 F0 67 00 1B 0A B3 63 94
0x25 7C 0E 51 54 F9 FC AA 2A 8F 16 DB 99 11 A0 20

6:36:36 AM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 2218
Failed to write 128 sectors at 2880

6:36:36 AM #23 Phase 179 File APIProgress.cpp, Line 282
Writing file to disc failed

6:36:38 AM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 3680
Disc info:
Partitions: 2
#0: Start: 0, Size: 576
#1: Start: 592, Size: 64

6:36:38 AM #25 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

6:36:38 AM #26 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

6:36:38 AM #27 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed

6:36:42 AM #28 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/24/2006 10:47:00 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/24/2006 10:47:00 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


----- End NeroAPI error log -----


06:36:50 File burn_dvdfiles.cpp, Line 308
Compile DVD: exit
nox4444 is offline  
Old 15 Dec 2006, 12:23 AM   #5
Just Trying To Help
 
soup's Avatar
 
Join Date: Nov 2005
Location: Canada Region 1
Posts: 7,524
Default

Dma: http://forum.digital-digest.com/showthread.php?t=61905.
__________________

soup is offline  
Old 15 Dec 2006, 01:22 AM   #6
Digital Video Master
Digital Video Master
 
benbryant's Avatar
 
Join Date: Aug 2005
Location: Oahu Hawaii USA
Posts: 1,314
Default

Quote:
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 1 DMA: Off
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 2 DMA: Off
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 3 DMA: Off
dtscsi is for Daemon Tools use. IMHO, it shouldn't cause any problem with burning. Look like your burner doesn't like this particular media. Please try different media to see if it helps

Regards
benbryant is offline  
Old 15 Dec 2006, 05:29 AM   #7
Just Trying To Help
 
soup's Avatar
 
Join Date: Nov 2005
Location: Canada Region 1
Posts: 7,524
Default

Maybe read & use The Golden Rules.
soup is offline  
Old 18 Dec 2006, 01:38 PM   #8
Junior Member
Junior Member
 
Join Date: Dec 2006
Posts: 4
Default Again...

So after a lot of trial and error with EVERYTHING somehow Nero burned. For 3 DVD's anyway then the 4th one keeps messing up... tried the same things over again. It says my DMA is off, i reinstalled the driver (again) burned at the lowest speed and i also turned off burn at once but a power calibration error pops up.... heres the change log maybe someone can help me again? I appreciated everyone's help last time it's just I'd like Nero to work 100% of the time instead of sporadically. Maybe someone knows the problem?
Here's the change log: Thanks again!

Project type: Copy entire DVD
Target size: DVD5 (2282925)

22:29:58 File LangStreamPatcher.cpp, Line 56
Command table patching started...

22:29:58 File LangStreamPatcher.cpp, Line 103
VTS 1 - VTS_PGCITI - PGC 4 patched!

22:29:58 File LangStreamPatcher.cpp, Line 135
All tables successfully patched!

Burn settings:
Target: SONY DVD RW DW-U12A
Number of copies: 1
Write speed: 1385 KB/s
Temp folder: C:\Documents and Settings\Owner\My Documents\Nero Recode (7262822400 bytes free)
Direct burning: true
Target media: DVD R/RW, DVD R DL, DVD-RAM
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false

22:30:04 File burn_dvdfiles.cpp, Line 238
Compile DVD: init

VMG Menus Vobs [2 vobus] 1.37MB -> 1.23MB [R 0.89]
Video: 1.22MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]

VTS_01 Menus Vobs [134 vobus] 2.15MB -> 2.13MB [R 0.89]
Video: 0.32MB, extra: 1.81MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 1.49MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.06MB [enabled]

VTS_01 Title Vobs [17524 vobus] 4380.14MB -> 4379.82MB [R 1.00]
Video: 4131.10MB, extra: 248.72MB
Audio: 1 streams
0. 0. Dolby Digital 1-ch English 207.38MB [enabled]
Subpicture: 1 streams
0. 0. French 7.12MB [enabled]

VTS_02 Title Vobs [24 vobus] 6.50MB -> 6.11MB [R 0.89]
Video: 6.07MB, extra: 0.05MB
Audio: 0 streams
Subpicture: 0 streams

VTS_03 Title Vobs [281 vobus] 73.55MB -> 69.25MB [R 0.89]
Video: 68.70MB, extra: 0.55MB
Audio: 0 streams
Subpicture: 0 streams

22:30:04 File burn_dvdfiles.cpp, Line 1245
Compile DVD: begin copy 1

22:30:05 File NeroRecorderBase.cpp, Line 517
Writing to disc: D

22:30:05 File NeroRecorderBase.cpp, Line 531
Free capacity on disc: 2286457 sectors (2298496)

22:30:06 File burn_dvdfiles.cpp, Line 549
Compile DVD: burning 2286457 sectors (2282924 required)

22:30:06 File burn_dvdfiles.cpp, Line 745
Compile DVD: adjust target size to 4465.74MB (4464.00MB obtained)

22:30:06 File burn_dvdfiles.cpp, Line 595
Compiling DVD Volume started

22:30:06 File vob_record.cpp, Line 647
DirectBurn offset: VIDEO_TS.VOB 16

22:30:06 File burn_dvdfiles.cpp, Line 1151
Compile DVD: finished VMG Menus Vobs

VMG Menus Vobs:
Original 1.37MB -> Expected 1.37MB -> Output 1.37MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 2
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 1.37MB
Pictures Modified [I 0] [P 0] [B 0]

22:30:07 File burn_dvdfiles.cpp, Line 1151
Compile DVD: finished VTS_01 Menus Vobs

VTS_01 Menus Vobs:
Original 2.15MB -> Expected 2.15MB -> Output 2.15MB
Finished error -0.00MB
Ratio encoded = 0
Original encoded = 134
Slide encoded = 0
StillImage encoded = 0
Output extra size = 1.81MB
Source video size = 0.34MB
Pictures Modified [I 0] [P 0] [B 0]

22:30:07 File vob_record.cpp, Line 647
DirectBurn offset: VTS_01_0.VOB 832

22:30:11 File vob_record.cpp, Line 647
DirectBurn offset: VTS_01_1.VOB 1932

22:30:55 File NeroRecorder.cpp, Line 675
Burn failed (3)

----- Begin NeroAPI error log -----


Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero API version: 7.5.9.0
Using interface version: 7.0.5.6
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Recode
Internal Version: 7, 5, 9, 0

Recorder: <SONY DVD RW DW-U12A> Version: 2.0e - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200BB-98DWA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-U12A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S400/A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 1 DMA: Off
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 2 DMA: Off
CdRomPeripheral : NZ3059S RBE105G 1.0 dtscsi Port 2 ID 3 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DW-U12A E: CDRom0
ASUS CD-S400/A F: CDRom1
NZ3059S RBE105G G: CDRom2
NZ3059S RBE105G H: CDRom3
NZ3059S RBE105G I: CDRom4
NZ3059S RBE105G J: CDRom5
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 39845888 (0) Byte
BUFE : 0
Physical memory : 247MB (253460kB)
Free physical memory: 103MB (105820kB)
Memory in use : 58
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.12.2006
NeroAPI
10:30:05 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

10:30:05 PM #2 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: -1 ( 0:00.-1, 0MB)

10:30:05 PM #3 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO

10:30:05 PM #4 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: SONY DVD RW DW-U12A, Media type: DVD-R
Disc Manufacturer: Prodis - cF02
Disc Application Code: 64, Disc Physical Code: 193

10:30:05 PM #5 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:30:05 PM #6 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:30:05 PM #7 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 CC 00 01
Buffer x08504040: Len x648

10:30:06 PM #8 Text 0 File BurnAtOnceRecorder.cpp, Line 1010
Estimated filesystem size: 544

10:30:06 PM #9 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 1x (1,385 KB/s)

10:30:06 PM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 1709
Buffering files started

10:30:06 PM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 1415
Buffering VIDEO_TS.VOB

10:30:06 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 2608
Finished buffering file VIDEO_TS.VOB of size 1437696 bytes (702 sectors)

10:30:06 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 2675
Finished writing file VIDEO_TS.VOB of size 1437696 bytes (702 sectors)

10:30:06 PM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 2688
Buffering files finished successfully

10:30:07 PM #15 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 CC 00 01
Buffer x045bf600: Len x648

10:30:07 PM #16 Text 0 File DVDR.cpp, Line 3058
Recording mode: Sequential Recording Mode for Multisession

10:30:07 PM #17 Text 0 File DVDR.cpp, Line 3214
Start write address at LBA 0
DVD high compatibility mode: No

10:30:07 PM #18 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 CC 00 01
Buffer x08899940: Len x648

10:30:07 PM #19 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:30:07 PM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 677
Reserved fragment at 0. Length: 1296

10:30:07 PM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 1892
Reserved start fragment at 0

10:30:07 PM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 677
Reserved fragment at 1296. Length: 80

10:30:07 PM #23 Text 0 File BurnAtOnceRecorder.cpp, Line 1409
Writing VTS_01_0.VOB at sector 1376

10:30:07 PM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 2675
Finished writing file VTS_01_0.VOB of size 2252800 bytes (1100 sectors)

10:30:11 PM #25 Text 0 File BurnAtOnceRecorder.cpp, Line 1409
Writing VTS_01_1.VOB at sector 2476

10:30:53 PM #26 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 0E 20 00 00 20 00 00 00
Sense Area: 0xF1 00 03 FF FD 00 00 12 00 00 00 00 73 03
Buffer x0877d040: Len x10000
0x00 00 01 BA 44 00 66 53 C5 1D 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 86 4A 3A 4B 93 CA D4 34 64
0x90 E6 E5 CD F2 7C B6 41 D2 2D 3A 1C 7A 42 DA 1A

10:30:54 PM #27 Text 0 File BurnAtOnceRecorder.cpp, Line 2218
Failed to write 96 sectors at 3584

10:30:54 PM #28 Phase 179 File APIProgress.cpp, Line 282
Writing file to disc failed

10:30:58 PM #29 Text 0 File BurnAtOnceRecorder.cpp, Line 3680
Disc info:
Partitions: 2
#0: Start: 0, Size: 1280
#1: Start: 1296, Size: 64

10:31:00 PM #30 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:31:00 PM #31 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

10:31:00 PM #32 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed

10:31:04 PM #33 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 1x (1,385 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/24/2006 10:47:00 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/24/2006 10:47:00 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


----- End NeroAPI error log -----


22:31:15 File burn_dvdfiles.cpp, Line 308
Compile DVD: exit
nox4444 is offline  
Old 18 Dec 2006, 04:03 PM   #9
BR7
He is coming to your little town!
 
BR7's Avatar
 
Join Date: Aug 2005
Location: Sioux City,IA
Posts: 2,137
Default

Quote:
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/24/2006 10:47:00 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/24/2006 10:47:00 PM (Prassi/Veritas driver for win 2K)

This kind of sounds like a Roxio\Sonic problem to me.If I remeber right Roxio and Sonic will cause Prassi/Veritas to mess with nero.If you have Roxio\Sonic installed I suggest you use Roxio Zapper and get rid of it.Even if you uninstalled it a while ago.If Roxio Zapper wont remove it then Windows Installer CleanUp Utility 1.0 will
__________________

My Blu-ray Collection

Last edited by BR7; 18 Dec 2006 at 09:36 PM
BR7 is offline  
Old 19 Dec 2006, 04:45 AM   #10
Junior Member
Junior Member
 
Join Date: Dec 2006
Posts: 4
Default

Question... I don't even see anything to do with Roxio/sonic in the windows installer prog. The only thing I don't know wut it is is the MSXML. Any suggestions?
nox4444 is offline  
 

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Getting Frustrated Taylormade33 DVD Authoring and Editing 1 10 Oct 2006 01:43 PM
Frustrated Brucer Junior Members/Newbies 2 27 Nov 2005 03:53 AM
Help please. (Getting frustrated) jaycute Conversion/Encoding 2 8 Feb 2004 01:06 AM



All times are GMT +10. The time now is 04:12 PM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2018 Digital Digest

Visit DivXLand   Visit dvdloc8.com