Digital Video Forums  

Go Back   Digital Video Forums > Disc Formats > DVD Blank Media, Burning, Recording Hardware

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 2 Dec 2008, 01:20 AM   #1
Junior Member
Junior Member
 
Join Date: Feb 2002
Posts: 10
Default Burning images on dvd+r DL with imgburn n nero

Hi,
i've tried to burn various iso images with nero and imgburn on dvd+r DL media. The writer burns the images fine on both programs with the option set for booktype to dvd-rom. once the burn process is done, I re-insert the dvd into my dvd writer but it fails to read it, i also try it in my other dvd-rom on same PC and also it doesnt read it there. But it reads it fine on my laptop which has a dvd-rw. my PC dvd writer is a Samsung SH-S203P, and the media i'm using atm is Infiniti360 printable dvd+r DL. My laptop is a dell inspiron 1525.

any ideas whats wrong? thanks

just tried burning and setting the book-type to what the physical disc is (i.e. leave it as dvd +r DL) and after the burn process my samsung writer reads it..but strange it doesnt when its set to dvd-rom?

anyone else experience issues like this??

Last edited by blutach; 2 Dec 2008 at 07:41 AM
chandru is offline   Reply With Quote
Old 2 Dec 2008, 07:48 AM   #3
Junior Member
Junior Member
 
Join Date: Feb 2002
Posts: 10
Default

I 13:08:58 Searching for SCSI / ATAPI devices...
I 13:09:01 Found 1 DVD-ROM and 1 DVD▒RW/RAM!
I 13:16:48 Operation Started!
I 13:16:48 Source File: I:\****.iso
I 13:16:48 Source File Sectors: 3,471,104 (MODE1/2048)
I 13:16:48 Source File Size: 7,108,820,992 bytes
I 13:16:48 Source File Volume Identifier: ***
I 13:16:48 Source File Volume Set Identifier: 4908D0F84908D0C1
I 13:16:48 Source File Implementation Identifier: EZB UltraISO
I 13:16:48 Source File File System(s): UDF (1.02)
I 13:16:48 Destination Device: [2:0:0] TSSTcorp CDDVDW SH-S203P SB01 (E (SCSI)
I 13:16:48 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x)
I 13:16:48 Destination Media Sectors: 4,173,824
I 13:16:48 Write Mode: DVD
I 13:16:48 Write Type: DAO
I 13:16:48 Write Speed: MAX
I 13:16:48 Link Size: Auto
I 13:16:48 Test Mode: No
I 13:16:48 OPC: No
I 13:16:48 BURN-Proof: Enabled
I 13:16:49 Book Type Setting: DVD-ROM
I 13:16:49 Optimal L0 Data Zone Capacity: 1,735,552
I 13:16:49 Optimal L0 Data Zone Method: ECC Block Boundary
I 13:17:28 Filling Buffer... (40 MB)
I 13:17:29 Writing LeadIn...
I 13:17:31 Writing Session 1 of 1... (1 Track, LBA: 0 - 3471103)
I 13:17:31 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3471103)
I 13:17:31 Writing Layer 0... (LBA: 0 - 1735551)
I 13:28:16 Writing Layer 1... (LBA: 1735552 - 3471103)
I 13:39:04 Synchronising Cache...
I 13:39:08 Closing Track...
I 13:39:09 Finalising Disc...
I 13:39:47 Exporting Graph Data...
I 13:39:47 Graph Data File: C:\Users\Chan\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S203P_SB01_01-DECEMBER-2008_13-16_RICOHJPN-D01-67_MAX.ibg
I 13:39:47 Export Successfully Completed!
I 13:39:47 Operation Successfully Completed! - Duration: 00:22:58
I 13:39:47 Average Write Rate: 5,369 KB/s (3.9x) - Maximum Write Rate: 5,645 KB/s (4.1x)
chandru is offline   Reply With Quote
Old 2 Dec 2008, 08:13 AM   #4
Not a god of digital video
 
blutach's Avatar
 
Join Date: Oct 2004
Location: is everything!
Posts: 24,627
Default

Quote:
I 13:16:48 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x)

I 13:16:48 Write Speed: MAX
1. ONLY use Verbatim, +R, 2.4x, MKM-001-00, Made in Singapore for DL burns. They really are the only reliable DL discs. Eveything else is cheaper, but is soooo much inferior and produces bad burns. See here.

2. Slow down the burn, particularly on laptops.

3. Verify your burn and if possible, do a PIPO scan afterwards.

4. Check for a newer firmware for that burner.

Regards

Last edited by blutach; 2 Dec 2008 at 08:16 AM
blutach is offline   Reply With Quote
Old 2 Dec 2008, 08:40 AM   #5
Junior Member
Junior Member
 
Join Date: Feb 2002
Posts: 10
Default

according to the log, average burn rate was 4x? the burn is fine AFAIK, as it is fully readable on my laptop. just not on my SH-s203p which is on my pc. have latest firmware on it.. SB01. also this drive does definately support bitsetting doesnt it..if that log is anything to go by?
chandru is offline   Reply With Quote
Old 2 Dec 2008, 09:22 AM   #6
Junior Member
Junior Member
 
Join Date: Feb 2002
Posts: 10
Default

just loaded ******** on my laptop and with the disc imgburn and nero said it burnt as dvd-rom this is what it says:

PBDS DVD+-RW DS-8W1P BD1C (ATA)
Current Profile: DVD+R DL

Disc Information:
Status: Complete
Erasable: No
Sessions: 1
Sectors: 3,471,104
Size: 7,108,820,992 bytes
Time: 771:23:29 (MM:SS:FF)

Physical Format Information (ADIP):
Disc ID: RICOHJPN-D01-67
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded):
Disc ID: RICOHJPN-D01-67
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 1,932,159

Layer Information:
Layer 0 Sectors: 1,735,552 (50%)
Layer 1 Sectors: 1,735,552 (50%)

--------------------

that does mean it has set it correctly? correct?

Last edited by blutach; 2 Dec 2008 at 10:37 AM
chandru is offline   Reply With Quote
Old 2 Dec 2008, 09:24 AM   #7
Junior Member
Junior Member
 
Join Date: Feb 2002
Posts: 10
Default

and this is what it says for the dvd i burnt with nero, leaving the booktype to what the physical disc was (i.e. dvd+r dl)

-----------
PBDS DVD+-RW DS-8W1P BD1C (ATA)
Current Profile: DVD+R DL

Disc Information:
Status: Complete
Erasable: No
Sessions: 1
Sectors: 3,471,104
Size: 7,108,820,992 bytes
Time: 771:23:29 (MM:SS:FF)

Physical Format Information (ADIP):
Disc ID: RICOHJPN-D01-67
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded):
Disc ID: RICOHJPN-D01-67
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 1,932,159

Layer Information:
Layer 0 Sectors: 1,735,552 (50%)
Layer 1 Sectors: 1,735,552 (50%)
---------------------
chandru is offline   Reply With Quote
Old 2 Dec 2008, 10:34 AM   #8
Not a god of digital video
 
blutach's Avatar
 
Join Date: Oct 2004
Location: is everything!
Posts: 24,627
Default

Please go back and re-read post 4. Your disc is of such low quality, it can't even be read in your Samsung drive.

Regards
blutach is offline   Reply With Quote
Old 2 Dec 2008, 10:39 AM   #9
Junior Member
Junior Member
 
Join Date: Feb 2002
Posts: 10
Default

i have...just tryin to think if its anythin 2do with my sata controller...

btw thx for ur help

Last edited by blutach; 2 Dec 2008 at 11:47 AM
chandru is offline   Reply With Quote
Old 2 Dec 2008, 11:48 AM   #10
Not a god of digital video
 
blutach's Avatar
 
Join Date: Oct 2004
Location: is everything!
Posts: 24,627
Default

It's most likely got nothing to do with that (but check that the drive can read other discs).

Get some Verbs and try again. You'll be pleasantly surprised.

Regards

Last edited by blutach; 2 Dec 2008 at 12:08 PM
blutach is offline   Reply With Quote
Old 2 Dec 2008, 12:23 PM   #11
Junior Member
Junior Member
 
Join Date: Feb 2002
Posts: 10
Default

lol this is weird. changed the drivers to siI 3112 satalink ones, my computer wouldnt boot to windows, then had to change it back, and now my drive reads those discs which i set to booktype dvdrom! YAY!
chandru is offline   Reply With Quote
Old 2 Dec 2008, 10:36 PM   #12
Junior Member
Junior Member
 
Join Date: Feb 2002
Posts: 10
Default

with nero infotool, it says under configuration for storage controllers:

Silicon Image SiI 3112 SataRaid controller
driver info:
file: oem29.inf
description: Silicon Image SiI 3112 SataLink controller
Version: 1.3.68.2
Provider: Silicon Image
Date: 4-13-2007

how do i check if it definately using that driver? that is what i changed the driver to and then windows didnt boot up, so had to bootup with windows vista cd, and when it asked me to load drivers for my vista harddrive i used the sataraid ones from siliconimage.com with version 1.0.60.0. and then windows loads now?
chandru is offline   Reply With Quote
Old 12 Dec 2008, 04:03 PM   #13
Junior Member
Junior Member
 
Join Date: Dec 2008
Posts: 1
Question-2

Hey chandru!

So you have actually been able to burn in DVD-ROM with that combination? I'm trying to set the booktype using imgBurn on my Dell Latitude D830 with a PBDS DVD+-RW DS-8W1P and the latest driver (BD1C) on Verbatim DVD+R DL disks but get errors when trying to set the booktype. When I try using the BenQ tab the error says "Unknown (FAILED!). Reason: Invalid command operation code". If I try the LITE-ON tab the error is "Unknown (FAILED!). Reason: No Additional Sense Information" when either Drive (For DVD+R DL Media - EEPROM!) or Drive (For DVD+R DL Media). Did you have to do anything special to be able to set the booktype?
ispyder is offline   Reply With Quote
Old 13 Dec 2008, 01:43 AM   #14
Just Trying To Help
 
soup's Avatar
 
Join Date: Nov 2005
Location: Canada Region 1
Posts: 7,524
Default

Using ImgBurn, I have never had a drive not automatically change the booktype for Dvd+R DL to Dvd-Rom. For Dvd+Rs, some drives like LiteONs need the LiteON bitset utility & Pioneers need the firmware tweaked to be able to do it. You should check out the ImgBurn Forum right here.

http://forum.digital-digest.com/forumdisplay.php?f=106
Attached Thumbnails
Burning images on dvd+r DL with imgburn n nero-ib1.png  
__________________

soup is offline   Reply With Quote
Old 16 Dec 2008, 10:51 AM   #15
Junior Member
Junior Member
 
Join Date: Feb 2002
Posts: 10
Default

Quote:
Originally Posted by ispyder View Post
Hey chandru!

So you have actually been able to burn in DVD-ROM with that combination? I'm trying to set the booktype using imgBurn on my Dell Latitude D830 with a PBDS DVD+-RW DS-8W1P and the latest driver (BD1C) on Verbatim DVD+R DL disks but get errors when trying to set the booktype. When I try using the BenQ tab the error says "Unknown (FAILED!). Reason: Invalid command operation code". If I try the LITE-ON tab the error is "Unknown (FAILED!). Reason: No Additional Sense Information" when either Drive (For DVD+R DL Media - EEPROM!) or Drive (For DVD+R DL Media). Did you have to do anything special to be able to set the booktype?


hey!
i didnt burn the discs on my laptop. burnt it on my PC using my samsung writer and it didnt read on my PC after the burn completed but it read fine on my laptop. I re-installed some drivers, and now I can read the dvds set to booktype dvd-rom on my PC. strange! i havent tried burning on my laptop yet..
chandru is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sector Errors while burning with both Imgburn and with Nero 7 Meluivan ImgBurn 2 24 Apr 2007 01:02 AM
Sudden problem burning with ImgBurn and Nero SydneyRasta ImgBurn 1 6 Apr 2007 10:34 AM
FAQ: Burning with ImgBurn vs Nero - which is better? blutach FAQ and Guides 6 22 Feb 2005 03:59 PM
vcd gear2.0 and nero images bushnibbler Conversion/Encoding 0 14 Nov 2001 01:29 PM



All times are GMT +10. The time now is 01:24 PM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2018 Digital Digest

Visit DivXLand   Visit dvdloc8.com