Digital Video Forums  

Go Back   Digital Video Forums > Disc Formats > DVD Blank Media, Burning, Recording Hardware

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 19 Aug 2008, 04:45 AM   #1
Junior Member
Junior Member
 
Join Date: Aug 2008
Posts: 7
Unhappy-2 Nero DVD Doesnt Work In Reg DVD Player Anymore, What Happened???

I'm having this strange problem with using Nero and I dont understand why. Hopefully someone will be able to give some ideas on how to fix.

I had a brand new laptop that I installed Nero on it alonf with some other programs I needed. I was able to burn a few DVDs using Nero and was able to play them in my Regular dvd player with no problems...

Now...I dont know if the next part I'm about to say has anything to do with it, but at some point as time when on, I installed more programs, one was Slysoft Anydvd, a few anit virus prgrams and etc.

And then for some reason, again I dont know why...when I burn the dvd using nero, it goes thru fine, but when I try to play it on my regular dvd player it does not work. When I burn it, I do not get any errros at all. I even read the article from Digital Digest on burning with Nero and followed the steps and it still will not work.


Please if any can think of some reason why this is happening,
Jo
fst2008 is offline   Reply With Quote
Old 19 Aug 2008, 05:03 AM   #2
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

Do the burned dvd's play in the laptop drive?

Would you post your last nero log, see the sticky at the top of this forum
Chewy is offline   Reply With Quote
Old 19 Aug 2008, 06:02 AM   #3
Junior Member
Junior Member
 
Join Date: Aug 2008
Posts: 7
Default

Hello and thank you for taking out the time. As for the dvd's...The dvd's that did work in my home dvd player, are able to also play in my laptop dvd player. And the dvd's that DONT work in my home dvd player...DO play in my laptop dvd player.

Here is the log of a movie I just tried to burn again to dvd:
Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.3.2.1
Internal Version: 8, 3, 2, 1

Recorder: <HL-DT-ST DVD-RW GWA-4082N>Version: CG02 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1
Bus Type : default
CD-ROM: <HL-DT-ST DVD-RW GWA-4082N>Version: CG02 - HA 1 TA 0 - 8.3.2.1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BEVT-60ZCT0 iaStor Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GWA-4082N atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GWA-4082N D: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1270MB (1300912kB)
Free physical memory: 593MB (608216kB)
Memory in use : 53
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

18.8.2008
UDF/ISO compilation
3:32:33 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

3:32:33 PM #2 Phase 112 File dlgbrnst.cpp, Line 1767
DVD-Video files reallocation started

3:32:34 PM #3 Phase 114 File dlgbrnst.cpp, Line 1767
DVD-Video files reallocation completed (no file modified)

3:32:34 PM #4 Text 0 File Isodoc.cpp, Line 6713
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

3:32:34 PM #5 Phase 111 File dlgbrnst.cpp, Line 1767
DVD-Video files sorted

3:32:34 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

3:32:34 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

3:32:34 PM #8 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media

3:32:34 PM #9 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

3:32:34 PM #10 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

3:32:34 PM #11 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

3:32:34 PM #12 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2264911 (503:18.61, 4423MB)

3:32:34 PM #13 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)

3:32:34 PM #14 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: HL-DT-ST DVD-RW GWA-4082N, Media type: DVD+R
Disc Manufacturer ID: <CMC MAG>, Media Type ID: <M01>, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

3:32:34 PM #15 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:32:34 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2264912 (2264912) = #2264912/503:18.62
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2264912 blocks [D: HL-DT-ST DVD-RW GWA-4082N]
--------------------------------------------------------------

3:32:35 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [D: HL-DT-ST DVD-RW GWA-4082N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4638539776, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2264912 | 0 | 0x00
2264912 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

3:32:35 PM #18 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

3:32:35 PM #19 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

3:32:35 PM #20 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

3:32:35 PM #21 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.

3:32:35 PM #22 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

3:32:35 PM #23 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 8x (11,080 KB/s)

3:32:35 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

3:32:35 PM #25 Text 0 File Cdrdrv.cpp, Line 10164
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..783]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
01 00 38 38 00 1D 62 35 - 07 30 22 10 08 20 1C 01 ..88..b5.0".....
00 00 00 1D 62 35 07 30 - 22 10 08 20 1C 01 00 00 ....b5.0".......
02 00 54 70 02 38 5F 56 - 20 14 0B 0B 01 18 00 00 ..Tp.8_V........
00 00 02 3D 5D 7A 20 14 - 0C 0A 01 18 00 00 00 10 ...=]z..........
03 00 54 DF 02 1F 65 5A - 20 14 0C 0A 01 18 00 00 ..T...eZ........
00 00 02 06 67 86 20 14 - 0C 0A 01 18 00 00 00 89 ....g...........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

3:32:35 PM #26 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

3:32:35 PM #27 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

3:42:47 PM #28 Text 0 File WriterStatus.cpp, Line 245
<D: HL-DT-ST DVD-RW GWA-4082N> start writing Lead-Out at LBA 2264912 (228F50h), length 0 blocks

3:43:08 PM #29 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 2264912

3:43:08 PM #30 Phase 37 File dlgbrnst.cpp, Line 1767
Burn process completed successfully at 8x (11,080 KB/s)

3:43:08 PM #31 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

3:43:11 PM #32 Text 0 File Cdrdrv.cpp, Line 11420
DriveLocker: UnLockVolume completed

3:43:11 PM #33 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======


Please let me know what you think


JO
fst2008 is offline   Reply With Quote
Old 19 Aug 2008, 10:55 AM   #4
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

Have you checked your laptop manufacturer for a firmware update?

Have you tries any better media like sony or verbatim?

But first I would try playing the problem disks in another standalone, often that turns out to be the problem
Chewy is offline   Reply With Quote
Old 20 Aug 2008, 01:22 AM   #5
Junior Member
Junior Member
 
Join Date: Aug 2008
Posts: 7
Unhappy-2

I would understand trying some of your ideas but let me explain...

The burned dvds did work on the same home theater dvd player up until a certain point....then for whatever reason, it will not play any of the burned dvds anymore.

If it was the firmware, then it would have never worked....this problem all happened within about 1 month or so....First it worked....and then it stopped.

As for the media....I would try that if I was NOT able to play ANY movies at all...but it did work with the tdk dvds so it cant be that.

I do appreicate your suggestions, they are good ones, but they dont apply to this.

The only thing I could think of, is if its possible that one of the dvd burning software or etc might have messed things up...like could installing anydvd casue this problem?


Thanks and hopefully we might be able to figure this out,
Jo
fst2008 is offline   Reply With Quote
Old 20 Aug 2008, 01:35 AM   #6
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

If it was a driver/filter problem, usually the nero log would pick that up

I would check out the player, why is it playing in your laptop but not the standalone player, dvd playability is like trying to get an overloaded airplane to take off, if everything is right you have no problems, if a lot is wrong then sometimes you can't take off and it crashes.

I have troubleshooted a few hundred problems like this, try another player


try better media

laptop burners for the most part only do a marginal job to start out with

TDK is not a good brand, I could probably make them work with a good burner and player

I never have all these problems

Last edited by Chewy; 20 Aug 2008 at 01:37 AM
Chewy is offline   Reply With Quote
Old 21 Aug 2008, 09:45 AM   #7
Digital Video Expert
Digital Video Expert
 
Join Date: Apr 2006
Posts: 713
Default

If you only knew how many people have said the same thing, "it can't be that" only to later find out it was "exactly that". You have several things that could be the cause, as Chewy pointed out, but until you actually bite the bullet and buy some better media, you may chase this problem for a long time. Then think it's fixed, only to find that it appears again.

Do yourself a large favor and start by trying some different media, such as TY's, Verb's, or even Sony.
copyless is offline   Reply With Quote
Old 21 Aug 2008, 03:21 PM   #8
Just Trying To Help
 
soup's Avatar
 
Join Date: Nov 2005
Location: Canada Region 1
Posts: 7,524
Default

These old eyes might be deceiving me, but I didn't see anywhere that the Dvd+R was booktyped to Dvd-Rom. From what I have seen so far, you are getting solid advice. I would also suggest giving ImgBurn a shot.

http://www.imgburn.com/
__________________

soup is offline   Reply With Quote
Old 24 Aug 2008, 02:06 AM   #9
Junior Member
Junior Member
 
Join Date: Aug 2008
Posts: 7
Default

Once again thanks for the advice thus far. If you could please explain the following...


You all mention to try a different media and/or try a different regular dvd player....BUT...if the problem was the media then it would have never worked in the dvd player...this is what I;m trying to explain...is that the same media brand, TDK worked for a few days but then for no reason, any new movies that I burn, will not work.

If it was the media why would it work and then stop....the blank dvds dont have an expiration date on them. Please explain?


Thanks
fst2008 is offline   Reply With Quote
Old 24 Aug 2008, 02:14 AM   #10
Digital Video Expert
Digital Video Expert
 
Join Date: Apr 2006
Posts: 713
Default

One answer, QC= Quality Control
copyless is offline   Reply With Quote
Old 24 Aug 2008, 02:30 AM   #11
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

burned dvd's go bad, they all do, some start very good and with proper care last a decade

some barely work on good players when first burned

you are generalizing. simplyfing way too much, this is a complex equation with many variables, it's rocket science, brain surgery and mountaineering all rolled into one

the players are one of the variables, they all go bad sooner or later
Chewy is offline   Reply With Quote
Old 24 Aug 2008, 10:05 AM   #12
Junior Member
Junior Member
 
Join Date: Aug 2008
Posts: 7
Default

I would agree it could maybe be the player but just recently I burned a short clip movie of a standup comic mabe 45min long and it worked just fine and it was also on the same blank TDK media.

This is what I mean, for some reason lately all full length movies I burn dont work. Any other ideas....I mentioned about installing Slysoft Anydvd....could that be part of the reason why it stopped working?


Thanks
fst2008 is offline   Reply With Quote
Old 24 Aug 2008, 10:57 AM   #13
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

OK, the shorter length burn would never reach 8x speed, so that tells us something


Let's kill 2 or 3 birds with one stone, download and install imgburn, don't worry it won't mess up your computer like nero 8 does

You have way too much running resident already

http://www.imgburn.com/

don't burn anything yet but post a filter driver load order

Once you learn to use imgburn, try a burn at 4x

http://forum.digital-digest.com/showthread.php?t=56373

you might consider turning some stuff off
Chewy is offline   Reply With Quote
Old 24 Aug 2008, 11:03 AM   #14
Junior Member
Junior Member
 
Join Date: Aug 2008
Posts: 7
Default

Thanks for still trying to help me...I downloaded what you said but dont understand what you mean by 'don't burn anything yet but post a filter driver load order' and then you said to burn at 4x...do you mean that I shuold try to burn one of the movies that didnt work with nero?

Please let me know what you meant about filter driver


thanks in advance
fst2008 is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
DVD doesnt work on dvd player Daniel B DVD Blank Media, Burning, Recording Hardware 17 2 Jul 2004 11:50 PM
my divx player 2 doesnt work anymore robi DivX/XviD Playback 2 24 Apr 2002 07:03 AM



All times are GMT +10. The time now is 03:20 AM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2018 Digital Digest

Visit DivXLand   Visit dvdloc8.com