Digital Video Forums  

Go Back   Digital Video Forums > Disc Formats > DVD Blank Media, Burning, Recording Hardware

Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 15 Jul 2009, 05:33 AM   #1
Junior Member
Junior Member
 
Join Date: Jul 2009
Posts: 5
Default Nero "Illegal Disc" error

Hey guys

I recently did a complete format of my PC, but after reinstalling everything I'm suddenly getting the error mentioned in the title. I'm pretty sure it's because DMA is turned off, but I can't get it turned on. I've followed your guide on the subject but it hasn't helped.

I have 2 HDD's and 1 DVD drive. But since my MB only supports 2 IDE devices, I have my 2 HDD's connected via a PCI card, and my DVD drive on the MB itself. When I go to the Device Manager it shows 2 primary IDE channels and 2 secondary. All 4 says "not applicable" in the current transfer mode. Any ideas?

Here's one of my logs from Nero:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16-12-2003 19:18:06
Nero version: 6.3.1.6
Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.16 - HA 4 TA 0 - 6.3.1.6
Adapter driver: <JRAID> HA 4
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <UC7509I SYT871E >Version: 1.0 - HA 6 TA 0 - 6.3.1.6
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-3500AG2.16 JRAID Port 4 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y080L0 YAR4 Pnp680r Port 5 ID 0 DMA: Off
DiskPeripheral : Hitachi HDT725025VLAT80 V5DO Pnp680r Port 5 ID 1 DMA: Off
CdRomPeripheral : UC7509I SYT871E 1.0 ahap09bb Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3500AG D: CDRom0
UC7509I SYT871E F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 2047MB (2096172kB)
Free physical memory: 1363MB (1396728kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.7.2009
UDF/ISO compilation
19:13:48 #1 Phase 112 File dlgbrnst.cpp, Line 1841
DVD-Video files reallocation started

19:13:48 #2 Phase 114 File dlgbrnst.cpp, Line 1841
DVD-Video files reallocation completed (no file modified)

19:13:48 #3 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19:13:48 #4 Phase 111 File dlgbrnst.cpp, Line 1841
DVD-Video files sorted

19:13:48 #5 Text 0 File Reader.cpp, Line 118
Reader running

19:13:48 #6 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

19:13:48 #7 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

19:13:48 #8 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media

19:13:48 #9 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2294287 (509:50.37, 4481MB)

19:13:48 #10 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

19:13:48 #11 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

19:13:48 #12 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:13:48 #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2294288 (2294288) = #2294288/509:50.38
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2294288 blocks [_NEC DVD_RW ND-3500AG]
--------------------------------------------------------------

19:13:48 #14 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [_NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4698701824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2294288 | lead-out | 1 | 0x00 | 0x41

19:13:48 #15 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started

19:13:48 #16 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

19:13:48 #17 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed

19:13:48 #18 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 2.4x (3.312 KB/s)

19:13:48 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:13:48 #20 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 23:38,708 (1418708ms) -> OK

19:13:48 #21 Text 0 File DVDR.cpp, Line 1619
Recording mode: Sequential Recording Mode

19:13:48 #22 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON

19:13:48 #23 Text 0 File DVDR.cpp, Line 1760
Start write address at LBA 0
DVD high compatibility mode: Yes

19:13:48 #24 Text 0 File Cdrdrv.cpp, Line 8002
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19:13:48 #25 SCSI -1046 File Cdrdrv.cpp, Line 1183
SCSI Exec, HA 4, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x23 0x02 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

19:13:48 #26 CDR -1046 File ThreadedTransferInterface.cpp, Line 1607
Illegal disc

19:13:48 #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1607
Could not perform start of Disc-at-once

19:13:48 #28 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK

19:13:48 #29 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 2.4x (3.312 KB/s)


Existing drivers:
File 'Drivers\jraid.sys': Ver=1.17.14.03 built by: WinDDK, size=46208 bytes, created 24-03-2007 13:20:24 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Kibs is offline   Reply With Quote
Old 15 Jul 2009, 08:54 AM   #2
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

Where did the jraid driver come from? What Mobo do you have?

Something is wrong there?
Chewy is offline   Reply With Quote
Old 15 Jul 2009, 09:28 AM   #3
Junior Member
Junior Member
 
Join Date: Jul 2009
Posts: 5
Default

I've got a Asus P5K, and I haven't installed any other drivers the the ones from the CD that came with the Mobo. Or... hmm... maybe it's a driver for the PCI card to which my 2 HDDs are connected? Dunno really. But I cant find the original drivers for the card so I had Windows find some automatically.
Kibs is offline   Reply With Quote
Old 15 Jul 2009, 09:38 AM   #4
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

http://support.asus.com/repair/repai...Language=en-us

It's the jmicron controller but what is the exact model number of the Mobo?
Chewy is offline   Reply With Quote
Old 15 Jul 2009, 09:47 AM   #5
Junior Member
Junior Member
 
Join Date: Jul 2009
Posts: 5
Default

Maybe I'm misunderstanding you because english isnt my native language. I've looked at the mobo and it just says P5K. I know there are P5K deluxe versions and so on, but I just have the standard version.
Kibs is offline   Reply With Quote
Old 15 Jul 2009, 09:48 AM   #6
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

You might set the jmicro mode to ide in bios
Chewy is offline   Reply With Quote
Old 15 Jul 2009, 09:51 AM   #7
Super Moderator
 
Chewy's Avatar
 
Join Date: Nov 2003
Location: millenium falcon
Posts: 18,971
Default

http://www.jmicron.com/Driver.htm

this is a mess tho
Chewy is offline   Reply With Quote
Old 15 Jul 2009, 07:15 PM   #8
Junior Member
Junior Member
 
Join Date: Jul 2009
Posts: 5
Default

I have now downloaded and installed the new drivers and made sure that it's in IDE mode in the bios, but it still hasn't helped:-/
Kibs is offline   Reply With Quote
Old 15 Jul 2009, 10:09 PM   #9
Junior Member
Junior Member
 
Join Date: Jul 2009
Posts: 5
Default

Turns out it's my burner that's shot. Tried putting it in my mates PC and it didn't work, but his burner worked in mine.

Thanks for the help anyway Chewy
Kibs is offline   Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
"Illegal Disc" - Nero 7, Windows Vista Thanh-BKK DVD Blank Media, Burning, Recording Hardware 15 5 Mar 2007 04:22 PM
Nero 6 "Illegal Disc" Error JW93Cobra DVD Blank Media, Burning, Recording Hardware 17 30 Jul 2006 01:52 PM
Getting an "illegal disc" message with Nero chamacon DVD Blank Media, Burning, Recording Hardware 3 13 Dec 2005 12:16 PM



All times are GMT +10. The time now is 11:23 PM.

Kirsch designed by Andrew & Austin


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright © 1999 - 2018 Digital Digest

Visit DivXLand   Visit dvdloc8.com