can't burn anymore?please help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jammiev
    Junior Member
    Junior Member
    • Jul 2005
    • 44

    can't burn anymore?please help

    hi, i can shrink my dvd's ok but when it comes to burning i get the error message shown below.
    It burns ok for 2% then ejects the dvd?
    PLease help!
    thanks

    Jamie & Sarah
    Nero Serial Removed*
    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 01:23:24
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.14
    Internal Version: 6, 6, 0, 14d
    (Nero Express)
    Recorder: <LITE-ON DVDRW LDW-851S> Version: GS0P - HA 1 TA 0 - 6.6.0.14
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <LITE-ON DVDRW LDW-851S >Version: GS0P - HA 1 TA 0 - 6.6.0.14
    Adapter driver: <atapi> HA 1
    === Scsi-Device-Map ===
    DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW LDW-851S atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : E-IDE CD-ROM 52X L atapi Port 1 ID 1 DMA: Off
    === CDRom-Device-Map ===
    LITE-ON DVDRW LDW-851S D: CDRom0
    E-IDE CD-ROM 52X L E: CDRom1
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 227MB (232816kB)
    Memory in use : 55 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    1.7.2005
    UDF/ISO compilation
    20:03:53 #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    20:03:53 #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    20:03:53 #3 Text 0 File Isodoc.cpp, Line 6314
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    20:03:53 #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    20:03:53 #5 Text 0 File Reader.cpp, Line 127
    Reader running

    20:03:53 #6 Text 0 File Writer.cpp, Line 122
    Writer LITE-ON DVDRW LDW-851S running

    20:03:53 #7 ISO9660GEN -11 File geniso.cpp, Line 3297
    First writeable address = 0 (0x00000000)

    20:03:53 #8 ISO9660GEN -11 File geniso.cpp, Line 3297
    First writeable address = 0 (0x00000000)

    20:03:53 #9 Text 0 File Burncd.cpp, Line 3230
    Turn on Disc-At-Once, using DVD media

    20:03:53 #10 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    20:03:53 #11 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO (enabled: CD)

    20:03:53 #12 Text 0 File DlgWaitCD.cpp, Line 2433
    Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AF1
    Disc Application Code: 64, Disc Physical Code: 193

    20:03:53 #13 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    20:03:53 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [LITE-ON DVDRW LDW-851S]
    --------------------------------------------------------------

    20:03:53 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [LITE-ON DVDRW LDW-851S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286128 | lead-out | 1 | 0x41 | 0x00

    20:04:23 #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    20:04:23 #17 Text 0 File Burncd.cpp, Line 4114
    Cache writing successful.

    20:04:23 #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    20:04:23 #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    20:04:23 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    20:04:23 #21 Text 0 File DVDR.cpp, Line 2316
    Recording mode: Sequential Recording Mode

    20:04:23 #22 Text 0 File Mmc.cpp, Line 21592
    Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

    20:04:23 #23 Text 0 File DVDR.cpp, Line 2470
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    20:04:23 #24 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    20:04:42 #25 Text 0 File Cdrdrv.cpp, Line 1288
    20:04:42.076 - LITE-ON DVDRW LDW-851S\H1 T0 : Queue again later

    20:05:28 #26 SCSI -1135 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B1B0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x3F 0x40 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    20:05:28 #27 CDR -1135 File Writer.cpp, Line 311
    Write error

    20:05:28 #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    20:05:29 #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    20:05:29 #30 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was 16191

    20:05:29 #31 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)

    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 02:02:46
    File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 03/01/2003 02:02:00 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 30/09/2001 17:07:12 (Adapter driver for rec)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
  • jmet
    Super Moderator
    • Nov 2002
    • 8697

    #2
    "CdRomPeripheral : LITE-ON DVDRW LDW-851S atapi Port 1 ID 0 DMA: Off"
    Turn your DMA on.

    Check your DMA settings - How ? do this -> Go to Control Panel> System> Hardware Tab> Device Manager> IDE ATA/ATAPI controllers> Right Click Primary IDE channel (and Secondary IDE channel after you finish with Primary)> Properties> Advanced Settings Tab> Transfer Mode or <a href="http://club.cdfreaks.com/showthread.php?t=101616">click here to learn.</a>

    Do the above from both "Primary & Secondary IDE channels".

    I (We) and you need to look at whats in both "Transfer Mode" and "Current Transfer Mode". Screen shot below is what I'm talking about.


    You can also look here for some other solutions: http://sniptools.com/vault/getting-b...windows-xp.htm

    If it is in "PIO" mode. Click the "Driver" tab, and uninstall the driver. Then reboot. Upon rebooting windows will automatically reinstall the driver and it should go back to "DMA" mode.




    "Disc Manufacturer: CMC MA - G. AF1"
    CMC MAG is the worst disc you can burn to! Get some better disc.

    "Sense Key: 0x03 (KEY_MEDIUM_ERROR)"
    Your burner doesn't like that brand of media.

    Comment

    • jammiev
      Junior Member
      Junior Member
      • Jul 2005
      • 44

      #3
      thanks, it worked

      cheers.

      Comment

      • jmet
        Super Moderator
        • Nov 2002
        • 8697

        #4
        You're very welcome! Glad I could help.

        Comment

        Working...