Announcement

Collapse
No announcement yet.

illegal disc error in nero express 6 using dual-layer media

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ontheone
    Junior Member
    Junior Member
    • Aug 2005
    • 2

    illegal disc error in nero express 6 using dual-layer media

    Hi, I wonder if any of you can point me in the right direction here. I tried to copy a disc using dual-layer media for the first time and got an "illegal disc" error message. I had a look through some previous posts, and got DMA on for all channels (one was using PIO). i have updated nero to the latest version. I have d/l'd the latest firmware for my writer, but haven't applied it yet. I thought i'd post my log up here in case there's anything obviously wrong besides the usual 'update eveything ' procedure!

    the media is Datawrite 8.5 GB DVD+R DL

    Thanks for your help!........>

    <SERIAL removed>
    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 14/08/2002 15:03:36
    ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b
    (Nero Express)
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.15 - HA 0 TA 0 - 6.6.0.16
    Adapter driver: <ATAPI>HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SAMSUNG SD-616Q DVD-ROM>Version: F403 - HA 1 TA 0 - 6.6.0.16
    Adapter driver: <ATAPI>HA 1
    === Scsi-Device-Map ===
    CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 0 ID 0 DMA: On
    DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : SAMSUNG DVD-ROM SD-616Q atapi Port 1 ID 0 DMA: On
    DiskPeripheral : Maxtor 6E040L0 atapi Port 1 ID 1 DMA: On
    === CDRom-Device-Map ===
    _NEC DVD_RW ND-2510A E: CDRom0
    SAMSUNG DVD-ROM SD-616Q F: CDRom4
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 57671680 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 383MB (392692kB)
    Free physical memory: 189MB (194148kB)
    Memory in use : 50 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Enabled (1)
    20.8.2005
    DVD-Copy on the fly
    15:19:40 #1 Text 0 File Reader.cpp, Line 127
    Reader running

    15:19:40 #2 Text 0 File Writer.cpp, Line 122
    Writer _NEC DVD_RW ND-2510A running

    15:19:40 #3 Text 0 File DVDCopy.cpp, Line 293
    DVD Track-Information from source disc:
    Media Type: DVD-ROM
    Last LBA on layer 0 = 1389135 / 0x15324F / 2713MB
    S01 T01 Con 0x04 Start 0 Len 2775117 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

    15:19:40 #4 Text 0 File DVDCopy.cpp, Line 406
    Max -1 tracks of 1 allowed to copy
    1: 0 - 2775117 = 2775117, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    15:19:40 #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    15:19:40 #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 4173823 (927:30.73, 8151MB)
    Last address to be written: 2775116 (616:41.41, 5420MB)

    15:19:40 #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    15:19:40 #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD+R9 Double Layer

    15:19:40 #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    15:19:40 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 2775117 (2775117) = #2775117/616:41.42
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2775117 blocks [_NEC DVD_RW ND-2510A]
    --------------------------------------------------------------

    15:19:40 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5683439616, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2775117 | lead-out | 1 | 0x41 | 0x00

    15:19:40 #12 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2.4x (3,324 KB/s)

    15:19:40 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    15:19:40 #14 Text 0 File DVDPlusDualLayer.cpp, Line 614
    L0 Data Zone Capacity set to 1389136 (153250h, 2713MB) -> OK, confirmed setting

    15:19:40 #15 CDR -1205 File DVDPlusDualLayer.cpp, Line 641
    Burning Layer 1

    15:19:40 #16 Text 0 File DVDPlusDualLayer.cpp, Line 651
    Start writing layer 1 at address 0 (0h)
    Recording mode: unknown Recording Mode

    15:19:40 #17 SCSI -1066 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0A740800
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    15:19:40 #18 Text 0 File DVDR.cpp, Line 6262
    Book Type counter: 500, Book Type selected in EEPROM, command version 0

    15:19:40 #19 Text 0 File DVDR.cpp, Line 6262
    Book Type counter: 500, Book Type selected in EEPROM, command version 0

    15:19:40 #20 Text 0 File DVDR.cpp, Line 6262
    Book Type counter: 500, Book Type selected in EEPROM, command version 0

    15:19:40 #21 SCSI -1066 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 0, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xC9 0x03 0x02 0x00 0x42 0x54 0x59 0x50 0x45 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    15:19:40 #22 Text 0 File DVDR.cpp, Line 5359
    Drive: _NEC DVD_RW ND-2510A
    Book Type request [NEC]: DVD-ROM, write to RAM
    Changing the Book Type was finished with error, return code -1066

    15:19:40 #23 Text 0 File DVDPlusRW.cpp, Line 665
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    15:19:55 #24 SCSI -1046 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0A2B0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:19:55 #25 CDR -1046 File Writer.cpp, Line 311
    Illegal disc

    15:19:55 #26 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    15:19:55 #27 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    15:19:56 #28 SCSI -1046 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 0, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:19:56 #29 SCSI -1046 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 0, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    15:19:56 #30 Phase 127 File dlgbrnst.cpp, Line 1832
    Generating DVD high compatibility borders

    15:19:56 #31 Phase 129 File dlgbrnst.cpp, Line 1832
    Generating DVD borders completed successfully

    15:19:56 #32 Text 0 File DVDR.cpp, Line 6262
    Book Type counter: 500, Book Type selected in EEPROM, command version 3338

    15:19:56 #33 Text 0 File DVDR.cpp, Line 6262
    Book Type counter: 500, Book Type selected in EEPROM, command version 3338

    15:19:56 #34 SCSI -1066 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 0, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xC9 0x03 0x02 0x00 0x42 0x54 0x59 0x50 0x45 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    15:19:56 #35 Text 0 File DVDR.cpp, Line 5359
    Drive: _NEC DVD_RW ND-2510A
    Book Type request [NEC]: DVD-ROM, write to RAM
    Changing the Book Type was finished with error, return code -1066

    15:19:56 #36 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2.4x (3,324 KB/s)

    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 25/06/2003 23:41:35
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 14/08/2002 15:03:36
    File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 14:00:00 (Adapter driver for rec)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
  • cynthia
    Super Moderatress
    • Jan 2004
    • 14278

    #2
    I would suggest you keep the hard disks on the same IDE cable and the burner and reader on the other IDE cable. To mix both hard disk and burner on the same cable is not good.

    For the bitsetting to work - I think the best way is to download a modified firmware with automatic bitsetting. You can find some of them here: http://www.micheldeboer.nl/firmware/25x0.html

    For your discs - I don't know what dye they have. You could check it out with www.dvdinfopro.com . Found this in another page:

    Datawrite 2.4x Printable DVD+R DL

    Datawrite are always at the forefront of new technology, offering the latest product at the best price. This Datawrite Printable Dual Layer disc is a perfect example of this. Offering a massive 8.5GB worth of storage space, the uses for this Dual Layer disc is endless. This Datawrite Dual Layer is also inkjet printable and will prove to be popular among our Epson R200 owners. Datawrite have opted to use the CMC MAG D01 dye for this disc, previously they had used the RITEK D01. During our thorough tests this disc performed extremely well and was easily on par with it's Ritek counterpart.

    ADVDINFO: CMC MAG D01

    Datawrite supply this Printable Dual Layer disc to us in packs of 10

    We recommend using these discs with the following hardware for best results:

    Epson R200/R300/R800, Pioneer 103/A03, Pioneer 104/A04, Pioneer 105/A05, Pioneer 106/A06, Pioneer 107/A07, Pioneer 108/A08, Pioneer 109/A09, Panasonic E20, E30, E50, E100, HS2, Sony DVD+/-R drives, Plextor DVD+/-R drives, NEC ND-1300/2500/2510/3500, Liteon DVD+/-R drives, LG DVD+/-R drives, Benq DVD +/-R drives and most other DVD-R writers and modern DVD players, standalone recorders and disk printers.

    Comment

    • ontheone
      Junior Member
      Junior Member
      • Aug 2005
      • 2

      #3
      Hi Cynthia,

      Thanks for your reply. That's interesting - in the past, I have been advised to keep a writer on a seperate cable to the main HDD. Do you know what the reason is to keep the HDDs together and the DVD drives together?

      Please forgive the stupid questions, but I am new to all this DVD burning malarky, although I am an IT bod!

      I didn't know anything about bitsetting - so had a search and found this on www.booktypefaq.com


      "Use the bitsetting (Set Booktype) feature in your bitsetting software to set your DVD+R/DVD+RW/DVD+R DL Media (Only DVD+R/+RW Media) backup to DVD-ROM for much higher compatibility with older DVD players and Game Consoles such as XBOX and PS2. Bitsetting is done during the burning process when bitsetting DVD+R Media. You can also set/change your DVD+RW Media's bitsetting/booktype, but the difference is that you can be bitset DVD+RW Media even AFTER you have burned it."

      What is the relevance of the dye tpe used in the media? can this cause problems?

      Thanks for your help,

      Marcus

      Comment

      • jmet
        Super Moderator
        • Nov 2002
        • 8697

        #4
        Originally Posted by ontheone
        Do you know what the reason is to keep the HDDs together and the DVD drives together?

        What is the relevance of the dye tpe used in the media? can this cause problems?

        Thanks for your help,

        Marcus
        Easiest way I can think to explain it is, if the HD and the Drives are on the same IDE channel, they in turn fight each other. Although, if they are on different IDE channels, they work together more efficiently.

        The type of dye used can be the difference between a successfully burn or a coaster. Certain drives like and dislike certain dye types. Usually the lower quality dye used, the more problems you will encounter. Like everything else in the world, you get what you pay for. (Sometimes those $15-20 bargains aren't such a bargain if you can't use them cause of the dye.)

        Comment

        • ksteele
          Junior Member
          Junior Member
          • Aug 2005
          • 1

          #5
          HDD on the same channel

          The reason for keeping your HDD and CD/DVD drives seperate is that your harddrive will automatically default to the slower speed of your cd/dvd drive. Slowing your system. However, I have come across the same information stating that to burn cd to cd or dvd to dvd - your drives have to be on different ide channels. Otherwise, use your harddrive as a mediator - and, go from cd or dvd to harddrive then, back to your writable cd-r / rw etc....

          Comment

          Working...
          😀
          🥰
          🤢
          😎
          😡
          👍
          👎