Announcement

Collapse
No announcement yet.

using nero 7 and taiyo yuden media but getting illegal disc error

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • shrimpcurry
    Junior Member
    Junior Member
    • Oct 2005
    • 8

    using nero 7 and taiyo yuden media but getting illegal disc error

    hello everybody, I'm a newb to the forum but I've been reading the posts on here and haven't been able to solve my problem. I've got a Memorex DVD16+/-DL4RWID2 drive in an enclosure with the latest jws6 firmware and nero 7 burning rom (after a burn with the "illegal disc" error, I updated everything). I'm using taiyo yuden media and have produced two coasters which I'm very sad about because they've NEVER given me any problems ever (this scares me). I'm also using my new compaq laptop so I know I have usb2 ports on here, so no incompatibility there. Here's one of the nero log files I saved. HELP ME PLEASE!!!

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: <Memorex DVD16+/-DL4RWlD2>Version: JWS6 - HA 1 TA 3 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <TEAC DW-224E-C >Version: A.8C - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    === Scsi-Device-Map ===
    DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TEAC DW-224E-C atapi Port 1 ID 0 DMA: On
    === CDRom-Device-Map ===
    TEAC DW-224E-C D: CDRom0
    Memorex DVD16+/-DL4RWlD2 E: CDRom3
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 57671680 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 382MB (391664kB)
    Free physical memory: 64MB (65612kB)
    Memory in use : 83 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    8.10.2005
    ISO compilation
    9:16:58 PM #1 Text 0 File Isodoc.cpp, Line 6410
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    9:16:58 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 56320KB of Memory

    9:16:58 PM #3 Text 0 File Reader.cpp, Line 124
    Reader running

    9:16:58 PM #4 Text 0 File Writer.cpp, Line 113
    Writer E: Memorex DVD16+/-DL4RWlD2 running

    9:16:58 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    9:16:58 PM #6 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using DVD media

    9:16:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2237855 (497:18.05, 4370MB)

    9:16:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO (enabled: CD)

    9:16:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: Memorex DVD16+/-DL4RWlD2, Media type: DVD-R
    Disc Manufacturer: TYG02 -
    Disc Application Code: 64, Disc Physical Code: 193

    9:16:58 PM #10 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:16:58 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2237856 (2237856) = #2237856/497:18.6
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2237856 blocks [E: Memorex DVD16+/-DL4RWlD2]
    --------------------------------------------------------------

    9:16:58 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
    Prepare recorder [E: Memorex DVD16+/-DL4RWlD2] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4583129088, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2237856 | lead-out | 1 | 0x41 | 0x00

    9:16:58 PM #13 Text 0 File SCSIPassThrough.cpp, Line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    9:16:59 PM #14 Phase 24 File dlgbrnst.cpp, Line 1724
    Caching of files started

    9:16:59 PM #15 Text 0 File Burncd.cpp, Line 4129
    Cache writing successful.

    9:16:59 PM #16 Phase 25 File dlgbrnst.cpp, Line 1724
    Caching of files completed

    9:16:59 PM #17 Phase 36 File dlgbrnst.cpp, Line 1724
    Burn process started at 8x (11,080 KB/s)

    9:16:59 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:16:59 PM #19 Text 0 File DVDR.cpp, Line 2469
    Recording mode: Sequential Recording Mode

    9:16:59 PM #20 Text 0 File MMC.cpp, Line 21541
    Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

    9:16:59 PM #21 Text 0 File DVDR.cpp, Line 2624
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:16:59 PM #22 Text 0 File Cdrdrv.cpp, Line 8385
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    9:17:49 PM #23 Text 0 File Cdrdrv.cpp, Line 1195
    21:17:49.718 - E: Memorex DVD16+/-DL4RWlD2 : Queue again later

    9:20:19 PM #24 SPTI -1046 File SCSIPassThrough.cpp, Line 306
    CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
    Buffer x04680000: Len x10000
    0x63 86 79 C5 45 E0 DE 08 02 4C 9F 57 C5 73 84 9F
    0x6B CA 6B 2D 1F 86 0C 82 9D 71 C3 AA 57 40 F3 71
    0x31 F0 CB D7 FC CE B6 D1 2F AA 74 A1 55 D3 E2 14

    9:20:19 PM #25 CDR -1046 File Writer.cpp, Line 302
    Illegal disc
    E: Memorex DVD16+/-DL4RWlD2

    9:20:19 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    9:20:19 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    9:20:20 PM #28 Text 0 File DVDR.cpp, Line 2866
    EndDAO: Last written address was 767

    9:20:20 PM #29 Phase 38 File dlgbrnst.cpp, Line 1724
    Burn process failed at 8x (11,080 KB/s)

    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/25/2005 11:03:00 PM (Prassi/Veritas driver for win 2K)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
  • shrimpcurry
    Junior Member
    Junior Member
    • Oct 2005
    • 8

    #2
    I've read somewhere that my drive may be a rebadged liteon drive or something, so the firmware upgrade I did really won't help. Is this true? Should I crossflash to the latest liteon firmware?

    Comment

    • anonymez
      Super Moderator
      • Mar 2004
      • 5525

      #3
      try using nero 6. forgive me if i'm wrong, but i think your nero 7 is pirated (and likely to be unstable/buggy/fake), because its has not yet been released (its not october 13 yet)

      illegal disc is usually because of unsupported media. check http://www.videohelp.com for a list of supported media for your dvd writer, you may also want to lower your burning speed...
      Last edited by anonymez; 9 Oct 2005, 07:14 PM.
      "What were the things in Gremlins called?" - Karl Pilkington

      Comment

      • blutach
        Not a god of digital video
        • Oct 2004
        • 24627

        #4


        New versions - same old problems

        Tried burning at 4x? How does it go with DVD Decrypter/Img Burn?

        Regards
        Last edited by blutach; 9 Oct 2005, 02:28 PM.
        Les

        Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

        Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
        [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

        Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

        Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


        You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

        Explore the sites and the programs - there's a gold mine of information in them

        Don't forget to play the Digital Digest Quiz!!! (Click here)

        Comment

        • Chewy
          Super Moderator
          • Nov 2003
          • 18971

          #5
          Physical memory : 382MB (391664kB)
          Free physical memory: 64MB (65612kB)
          there's a lot of crud running in the background, is your vid sharing 128?

          8x is pushing the envelope on an "OPTIMIZED" computer with usb2!

          according to cdfreaks review, "It will crossflash to 1693S, now it supports DVD-R9 DL"

          Comment

          • shrimpcurry
            Junior Member
            Junior Member
            • Oct 2005
            • 8

            #6
            It is a shared mem vid card. Know any way to free up more memory like what programs are essential to keep running? ok I'll try a slower speed. Thanks for all the suggestions.

            Comment

            • Chewy
              Super Moderator
              • Nov 2003
              • 18971

              #7
              If you can share 64 megs onboard vid, shrink would appreciate it,
              nero probably doesn't need it at 4x. Program running down next to clock
              and speaker icon are usually candidates for turning off, laptops take a few special programs. Powermanagement and keyboard/mouse stuff leave alone.
              What other burning programs do you have installed?

              Comment

              • shrimpcurry
                Junior Member
                Junior Member
                • Oct 2005
                • 8

                #8
                nothing but nero. got any suggestions? I successfully burned at 4x but damn, I really wish I didn't buy a 16x burner if 4x is the max I can get consistently. but yeah, any other alternative burning program suggestions will be much appreciated. THANKS TO EVERYONE WHO HELPED ME OUT.

                Comment

                • shrimpcurry
                  Junior Member
                  Junior Member
                  • Oct 2005
                  • 8

                  #9
                  also, I have a 128 shared vid card so can I make this lower? if so, how? I have a ati x200 or something like that.

                  Comment

                  • Taelon
                    Digital Video Specialist
                    Digital Video Specialist
                    • Sep 2005
                    • 887

                    #10
                    ImgBurn should use less memory than Nero

                    Start Here!
                    DVD Shrink for Dummies Guide
                    Search the Incredible Knowledgebases
                    DVD Shrink FAQ's - DVD Decrypter FAQ's
                    Eliminate CRC & Read Errors
                    Cleaning & Polishing Guide

                    Advanced DVD Reauthoring Essentials
                    PgcEdit v6.1 - Muxman - PgcDemux - VobBlanker v2.0.1

                    Comment

                    • anonymez
                      Super Moderator
                      • Mar 2004
                      • 5525

                      #11
                      you can change the amount of shared memory in the BIOS. (press the key mentioned when you start your laptop, to enter the BIOS. usually the 'delete' button) look for a setting 'vidoe shared memory' or something like that.

                      if you are not using the laptop for gaming (integrated has very poor performance anyway, and wouldn't be able to play much), you should lower it to ~32mb
                      Last edited by anonymez; 10 Oct 2005, 04:56 AM.
                      "What were the things in Gremlins called?" - Karl Pilkington

                      Comment

                      • Chewy
                        Super Moderator
                        • Nov 2003
                        • 18971

                        #12
                        Originally Posted by shrimpcurry
                        nothing but nero. got any suggestions? I successfully burned at 4x but damn, I really wish I didn't buy a 16x burner if 4x is the max I can get consistently. but yeah, any other alternative burning program suggestions will be much appreciated. THANKS TO EVERYONE WHO HELPED ME OUT.
                        What do you expect with a laptop? USB2 only does a little over 10-11MB/s.
                        8x burning is almost 11MB/s. 16x burners is all they make nowdays,
                        nothing special there at all. I burn at 4x on media made in JAPAN
                        with computers that run circles around laptops. The whole point is to be able
                        to make a movie backup that plays well and lasts.

                        Comment

                        • BSpielbauer
                          Member
                          Member
                          • Jun 2005
                          • 66

                          #13
                          shrimpcurry:

                          Do you have Roxio installed?

                          (Actually, your nero log indicates that you do... There is a driver listed there in your log which is the one that Nero claims is a Roxio driver that can cause a lot of "illegal disc" problems.)

                          In the majority of cases, the "illegal disc" points to a media issue (but you are using Taiyo Yudens, and we hope they are authentic ones), and it also
                          often points to firmware problems, or the DMA versus PIO problem.

                          However, SOMETIMES it is caused by the conflict that some people have had on their systems when they had both Roxio and Nero installed. Even though Roxio is not running in any way, the Nero apparently uses some drivers which it expects to be Windows ones, only Roxio has come along and replaced these with its own version. The "packet writing software" is the issue, here, from what i have read.

                          Not all systems have this conflict. Thousands are able to have both on their system with no problem. But, there have been enough legitimate reports of this that BOTH Roxio and Nero have tech notes at their web site about it (and both try to tell you to uninstall the other one's stuff, of course).

                          The solution -- try to uninstall Roxio. Try another burn. If you get the same result, go to Nero's web site, and look for the special utility there that they have which will truly get rid of all of those old Roxio drivers (some apparently can hang on even after you uninstall, in some cases). Then, try once more.

                          If you still get the "illegal disc error, ignore all of this, as it was not apparently applicable to your system.

                          --- For further study ---

                          From what I have read, this is one of the drivers that indicates Roxio has been on your system:

                          File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/25/2005 11:03:00 PM (Prassi/Veritas driver for win 2K)

                          You will find this same driver listed in your Nero log above; scroll to the place where it mentions "existing drivers."

                          -Bruce

                          Comment

                          • blutach
                            Not a god of digital video
                            • Oct 2004
                            • 24627

                            #14
                            Even it is not Roxio, it could be many of Sonic Solutions's other products, including RecordNow!, Easy CD DVD Creator, Easy DVD Copy, DVDit, etc etc.

                            Regards
                            Les

                            Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

                            Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
                            [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

                            Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

                            Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


                            You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

                            Explore the sites and the programs - there's a gold mine of information in them

                            Don't forget to play the Digital Digest Quiz!!! (Click here)

                            Comment

                            • shrimpcurry
                              Junior Member
                              Junior Member
                              • Oct 2005
                              • 8

                              #15
                              well everyone, I burned one single disc successfully and then it bombed again! I DID have sonic software installed so I uninstalled it from my computer. I also used the cleanpack from the nero site to see if any drivers were still present. After that I tried another disc but with no success. Here's the log and PLEASE HELP ME!!! I am going insane!!!
                              Windows XP 5.1
                              IA32
                              WinAspi: -
                              ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 9:35:34 PM
                              Nero Version: 6.6.0.16
                              Internal Version: 6, 6, 0, 16b
                              (Nero Express)
                              Recorder: <Memorex DVD16+/-DL4RWlD2>Version: JWS6 - HA 2 TA 0 - 6.6.0.16
                              Adapter driver: <> HA 2
                              Drive buffer : 2048kB
                              Bus Type : default (0) -> ATAPI, detected: ?
                              CD-ROM: <TEAC DW-224E-C >Version: A.8C - HA 1 TA 0 - 6.6.0.16
                              Adapter driver: <atapi> HA 1
                              === Scsi-Device-Map ===
                              DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
                              CdRomPeripheral : TEAC DW-224E-C atapi Port 1 ID 0 DMA: On
                              === CDRom-Device-Map ===
                              TEAC DW-224E-C D: CDRom0
                              Memorex DVD16+/-DL4RWlD2 E: CDRom1
                              =======================
                              AutoRun : 1
                              Excluded drive IDs:
                              WriteBufferSize: 57671680 (0) Byte
                              ShowDrvBufStat : 0
                              BUFE : 0
                              Physical memory : 382MB (391664kB)
                              Free physical memory: 69MB (71176kB)
                              Memory in use : 81 %
                              Uncached PFiles: 0x0
                              Use Inquiry : 1
                              Global Bus Type: default (0)
                              Check supported media : Disabled (0)
                              19.10.2005
                              ISO compilation
                              8:16:05 PM #1 Text 0 File Isodoc.cpp, Line 6356
                              Iso document burn settings
                              ------------------------------------------
                              Determine maximum speed : FALSE
                              Simulate : FALSE
                              Write : TRUE
                              Finalize CD : TRUE
                              Multisession : FALSE
                              Burning mode : DAO
                              Mode : 1
                              ISO Level : 1 (Max. of 11 = 8 + 3 char)
                              Character set : ISO 9660
                              Joliet : TRUE
                              Allow pathdepth more than 8 directories : TRUE
                              Allow more than 255 characters in path : TRUE
                              Write ISO9660 ;1 file extensions : TRUE

                              8:16:05 PM #2 Text 0 File Reader.cpp, Line 127
                              Reader running

                              8:16:05 PM #3 Text 0 File Writer.cpp, Line 122
                              Writer Memorex DVD16+/-DL4RWlD2 running

                              8:16:05 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
                              First writeable address = 0 (0x00000000)

                              8:16:05 PM #5 Text 0 File Burncd.cpp, Line 3233
                              Turn on Disc-At-Once, using DVD media

                              8:16:05 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
                              Last possible write address on media: 2298495 (510:46.45, 4489MB)
                              Last address to be written: 1361535 (302:33.60, 2659MB)

                              8:16:05 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
                              Write in overburning mode: NO (enabled: CD)

                              8:16:05 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
                              Recorder: Memorex DVD16+/-DL4RWlD2, Media type: DVD-R
                              Disc Manufacturer: TYG02 -
                              Disc Application Code: 64, Disc Physical Code: 193

                              8:16:05 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
                              >>> Protocol of DlgWaitCD activities: <<<
                              =========================================

                              8:16:05 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
                              Setup items (after recorder preparation)
                              0: TRM_DATA_MODE1 ()
                              2 indices, index0 (150) not provided
                              original disc pos #0 + 1361536 (1361536) = #1361536/302:33.61
                              relocatable, disc pos for caching/writing not required/ required, no patch infos
                              -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1361536 blocks [Memorex DVD16+/-DL4RWlD2]
                              --------------------------------------------------------------

                              8:16:05 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
                              Prepare recorder [Memorex DVD16+/-DL4RWlD2] for write in CUE-sheet-DAO
                              DAO infos:
                              ==========
                              MCN: ""
                              TOCType: 0x00; Session Closed, disc fixated
                              Tracks 1 to 1:
                              1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2788425728, ISRC ""
                              DAO layout:
                              ===========
                              __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
                              0 | lead-in | 0 | 0x41 | 0x00
                              0 | 1 | 0 | 0x41 | 0x00
                              0 | 1 | 1 | 0x41 | 0x00
                              1361536 | lead-out | 1 | 0x41 | 0x00

                              8:16:06 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
                              Caching of files started

                              8:16:06 PM #13 Text 0 File Burncd.cpp, Line 4120
                              Cache writing successful.

                              8:16:06 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
                              Caching of files completed

                              8:16:06 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
                              Burn process started at 4x (5,540 KB/s)

                              8:16:06 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
                              Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

                              8:16:06 PM #17 Text 0 File DVDR.cpp, Line 2379
                              Recording mode: Sequential Recording Mode

                              8:16:06 PM #18 Text 0 File Mmc.cpp, Line 21708
                              Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

                              8:16:06 PM #19 Text 0 File DVDR.cpp, Line 2534
                              Start write address at LBA 0
                              DVD high compatibility mode: Yes

                              8:16:06 PM #20 Text 0 File Cdrdrv.cpp, Line 8862
                              ---- DVD Structure: Physical Format Information (00h) ----
                              Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
                              Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
                              Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
                              Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
                              Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
                              Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
                              End Physical Sector Number of Data Area: 0 h
                              End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
                              Data in Burst Cutting Area (BCA) does not exist
                              Start sector number of the current Border-Out: 0 h
                              Start sector number of the next Border-In: 0 h
                              Media Specific [16..63]:
                              00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
                              00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
                              00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

                              8:16:49 PM #21 Text 0 File Cdrdrv.cpp, Line 1286
                              20:16:49.046 - Memorex DVD16+/-DL4RWlD2\H2 T0 : Queue again later

                              8:20:35 PM #22 SCSI -1046 File Cdrdrv.cpp, Line 1434
                              SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0A150000
                              Status: 0x04 (0x01, SCSI_ERR)
                              HA-Status 0x00 (0x00, OK)
                              TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
                              Sense Key: 0x02 (KEY_NOT_READY)
                              Sense Code: 0x30
                              Sense Qual: 0x05
                              CDB Data: 0x2A 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x20 0x00 0x00 0x00
                              Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
                              0x00 0x00 0x00 0x00 0x30 0x05

                              8:20:35 PM #23 CDR -1046 File Writer.cpp, Line 311
                              Illegal disc

                              8:20:35 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
                              all writers idle, stopping conversion

                              8:20:35 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
                              conversion idle, stopping reader

                              8:20:35 PM #26 Text 0 File DVDR.cpp, Line 2774
                              EndDAO: Last written address was 2047

                              8:20:35 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
                              Burn process failed at 4x (5,540 KB/s)

                              Existing drivers:
                              File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/26/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
                              File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 5:59:44 PM (Adapter driver for src)
                              Registry Keys:
                              HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

                              Comment

                              Working...
                              😀
                              🥰
                              🤢
                              😎
                              😡
                              👍
                              👎