I/O error

[beachbumm33]

I'm using a HP940 burner thats flashed over to a lite on LH-18A1H (HL06), ever since the flash, when I use dvd shrink and burn iso with ImgBurn I get a power calibration error. If i unplug the power from this device, then try to burn the iso with ImgBurn (not using dvd shrink) it burns.

Is there something I need to do with ImgBurn to rectify this?

This particular burner only has 25 burns on it and has been cleaned.

I use dvdshrink and ImgBurn with my lite-on 160p6s with absolutely no problems.

Any help?


here are 2 logs, one success with just iso, and one non success with dvdshrinkto imgburn


; //****************************************\\
; ImgBurn Version 2.2.0.0 - Log
; Tuesday, 06 March 2007, 12:50:45
; \\****************************************//
;
;
I 12:02:26 ImgBurn Version 2.2.0.0 started!
I 12:02:26 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 12:02:26 Total Physical Memory: 513,792 KB - Available: 278,124 KB
W 12:02:26 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 12:02:26 Initialising SPTI...
I 12:02:26 Searching for SCSI / ATAPI devices...
I 12:02:52 Found 1 DVD±RW and 1 DVD±RW/RAM!
I 12:03:01 Operation Started!
I 12:03:01 Source File: C:\FRIDAY.ISO
I 12:03:01 Source File Sectors: 2,183,462 (MODE1/2048)
I 12:03:01 Source File Size: 4,471,730,176 bytes
I 12:03:01 Source File Volume Identifier: FRIDAY
I 12:03:01 Source File Implementation Identifier: DVD Shrink
I 12:03:01 Source File File System(s): ISO9660, UDF (1.02)
I 12:03:01 Destination Device: [0:0:0] LITE-ON DVDRW LH-18A1H HL06 (E (ATA)
I 12:03:01 Destination Media Type: DVD+R (Disc ID: YUDEN000-T02-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 12:03:01 Destination Media Sectors: 2,295,104
I 12:03:01 Write Mode: DVD
I 12:03:01 Write Type: DAO
I 12:03:01 Write Speed: 4x
I 12:03:01 Link Size: Auto
I 12:03:01 Test Mode: No
I 12:03:01 BURN-Proof: Enabled
I 12:03:01 Filling Buffer... (20 MB)
I 12:03:01 Writing LeadIn...
I 12:03:26 Writing Image...
I 12:16:56 Synchronising Cache...
I 12:17:00 Closing Track...
I 12:17:02 Finalising Disc...
I 12:17:20 Image MD5: a0e1aceeeaa83371dbbac1c0cf584d3b
I 12:17:20 Operation Successfully Completed! - Duration: 00:14:19
I 12:17:20 Average Write Rate: 5,397 KB/s (3.9x) - Maximum Write Rate: 5,618 KB/s (4.1x)
I 12:17:20 Cycling Tray before Verify...
W 12:17:26 Waiting for device to become ready...
I 12:17:38 Device Ready!
I 12:17:38 Operation Started!
I 12:17:38 Source Device: [0:0:0] LITE-ON DVDRW LH-18A1H HL06 (E (ATA)
I 12:17:38 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: YUDEN000-T02-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 12:17:38 Image File: C:\FRIDAY.ISO
I 12:17:38 Image File Sectors: 2,183,462 (MODE1/2048)
I 12:17:38 Image File Size: 4,471,730,176 bytes
I 12:17:38 Image File Volume Identifier: FRIDAY
I 12:17:38 Image File Implementation Identifier: DVD Shrink
I 12:17:38 Image File File System(s): ISO9660, UDF (1.02)
I 12:17:38 Verifying Sectors... (LBA: 0 - 2183461)
I 12:22:29 Device MD5: a0e1aceeeaa83371dbbac1c0cf584d3b
I 12:22:29 Device (Padded) MD5: 00f3c4cdd648485bb971942698accbe2
I 12:22:29 Image MD5: a0e1aceeeaa83371dbbac1c0cf584d3b
I 12:22:29 Operation Successfully Completed! - Duration: 00:04:51
I 12:22:29 Average Verify Rate: 15,006 KB/s (10.8x) - Maximum Verify Rate: 22,125 KB/s (16.0x)
I 12:50:45 Close Request Acknowledged
I 12:50:45 Closing Down...
I 12:50:45 Shutting down SPTI...
I 12:50:45 ImgBurn closed!
;
;
; //****************************************\\
; ImgBurn Version 2.2.0.0 - Log
; Tuesday, 06 March 2007, 12:02:08
; \\****************************************//
;
;
I 11:54:20 ImgBurn Version 2.2.0.0 started!
I 11:54:20 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 11:54:20 Total Physical Memory: 513,792 KB - Available: 277,664 KB
W 11:54:20 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 11:54:20 Initialising SPTI...
I 11:54:20 Searching for SCSI / ATAPI devices...
I 11:54:21 Found 1 DVD±RW and 1 DVD±RW/RAM!
I 11:54:21 Operation Started!
I 11:54:21 Source File: C:\FRIDAY.ISO
I 11:54:21 Source File Sectors: 2,183,462 (MODE1/2048)
I 11:54:21 Source File Size: 4,471,730,176 bytes
I 11:54:21 Source File Volume Identifier: FRIDAY
I 11:54:21 Source File Implementation Identifier: DVD Shrink
I 11:54:21 Source File File System(s): ISO9660, UDF (1.02)
I 11:54:21 Destination Device: [0:0:0] LITE-ON DVDRW LH-18A1H HL06 (E (ATA)
I 11:54:21 Destination Media Type: DVD+R (Disc ID: YUDEN000-T02-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 11:54:21 Destination Media Sectors: 2,295,104
I 11:54:21 Write Mode: DVD
I 11:54:21 Write Type: DAO
I 11:54:21 Write Speed: 4x
I 11:54:21 Link Size: Auto
I 11:54:21 Test Mode: No
I 11:54:21 BURN-Proof: Enabled
I 11:54:22 Filling Buffer... (20 MB)
I 11:54:22 Writing LeadIn...
W 11:54:51 Failed to Write Sectors 0 - 31 - Power Calibration Area Error
W 11:54:51 Retrying (1 of 20)...
W 11:55:07 Retry Failed - Power Calibration Area Error
W 11:55:07 Retrying (2 of 20)...
W 11:55:23 Retry Failed - Power Calibration Area Error
W 11:55:23 Retrying (3 of 20)...
W 11:55:32 Retry Failed - Power Calibration Area Error
W 11:55:32 Retrying (4 of 20)...
W 11:55:46 Retry Failed - Power Calibration Area Error
W 11:55:46 Retrying (5 of 20)...
W 11:55:55 Retry Failed - Power Calibration Area Error
W 11:55:55 Retrying (6 of 20)...
W 11:56:10 Retry Failed - Power Calibration Area Error
W 11:56:10 Retrying (7 of 20)...
W 11:56:25 Retry Failed - Power Calibration Area Error
W 11:56:25 Retrying (8 of 20)...
W 11:56:39 Retry Failed - Power Calibration Area Error
W 11:56:39 Retrying (9 of 20)...
W 11:56:54 Retry Failed - Power Calibration Area Error
W 11:56:54 Retrying (10 of 20)...
W 11:57:09 Retry Failed - Power Calibration Area Error
W 11:57:09 Retrying (11 of 20)...
W 11:57:24 Retry Failed - Power Calibration Area Error
W 11:57:24 Retrying (12 of 20)...
W 11:57:39 Retry Failed - Power Calibration Area Error
W 11:57:39 Retrying (13 of 20)...
W 11:57:54 Retry Failed - Power Calibration Area Error
W 11:57:54 Retrying (14 of 20)...
W 11:58:09 Retry Failed - Power Calibration Area Error
W 11:58:09 Retrying (15 of 20)...
W 11:58:24 Retry Failed - Power Calibration Area Error
W 11:58:24 Retrying (16 of 20)...
W 11:58:39 Retry Failed - Power Calibration Area Error
W 11:58:39 Retrying (17 of 20)...
W 11:58:54 Retry Failed - Power Calibration Area Error
W 11:58:54 Retrying (18 of 20)...
W 11:59:09 Retry Failed - Power Calibration Area Error
W 11:59:09 Retrying (19 of 20)...
W 11:59:24 Retry Failed - Power Calibration Area Error
W 11:59:24 Retrying (20 of 20)...
W 11:59:40 Retry Failed - Power Calibration Area Error
E 12:02:01 Failed to Write Sectors 0 - 31 - Power Calibration Area Error
I 12:02:01 Synchronising Cache...
I 12:02:02 Closing Track...
I 12:02:03 Finalising Disc...
E 12:02:04 Failed to Write Image!
E 12:02:04 Operation Failed! - Duration: 00:07:42
I 12:02:04 Average Write Rate: N/A - Maximum Write Rate: N/A
I 12:02:08 Close Request Acknowledged
I 12:02:08 Closing Down...
I 12:02:08 Shutting down SPTI...
I 12:02:08 ImgBurn closed!
;

[LIGHTNING UK!]

This is a drive / media issue. The software doesn't even come into it.

I've just installed the new LH-20A1H drive in my PC and it failed to write to the first YUDEN000-T02-00 disc I gave it. Whilst the drive was performing the LeadIn stuff, it was making some odd sounds. It took a while but eventually it errored out with a 'Write Error'. I put another disc in and it worked fine - achieving a 99% scan in DVDInfoPro (BenQ 1655) and 95% in CDSpeed (LH-20A1H).

So basically these things just happen! As the firmware matures, I'm sure they'll fix these issues.

[beachbumm33]

Thanks Lightning.....I definately came to the conclusion that it wasnt ImgBurn....I could pull up iso's created by shrink, and burn them, but not go automatically to Imgburn from shrink and burn, if that makes sense. I flashed that drive back to the hp firmware and just use it as a reader and lightscribe burner since i picked up another shw-160p6s. Having great success with that burner!
Thanks for the fantastic burning program, keep up the good work!!!