Failed to Set L0 Data Zone Capacity!

[Yamiaro]

It always does this. 1 out of 20 tries it works. As you can see from the log I tried more then once.




I 15:59:54 ImgBurn Version 2.4.2.0 started!
I 15:59:54 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 15:59:54 Total Physical Memory: 1,506,800 KB - Available: 653,712 KB
I 15:59:54 Initialising SPTI...
I 15:59:54 Searching for SCSI / ATAPI devices...
I 15:59:54 Found 1 CD-ROM and 2 DVD±RWs!
W 16:00:00 Device Removal Detected!
I 16:00:00 Searching for SCSI / ATAPI devices...
I 16:00:01 Found 1 CD-ROM and 1 DVD±RW!
W 16:00:42 Device Arrival Detected!
I 16:00:42 Searching for SCSI / ATAPI devices...
I 16:00:42 Found 1 CD-ROM and 2 DVD±RWs!
I 16:01:42 Operation Started!
I 16:01:42 Source File: C:\Documents and Settings\Ali Alrubayai\My Documents\GrabIt Downloads\1224515357\x360-gears2.dvd
I 16:01:42 Source File Sectors: 3,825,924 (MODE1/2048)
I 16:01:42 Source File Size: 7,835,492,352 bytes
I 16:01:42 Source File Volume Identifier: XGD2DVD_NTSC
I 16:01:42 Source File Volume Set Identifier: 34672923
I 16:01:42 Source File Implementation Identifier: Sonic Scenarist 3.1
I 16:01:42 Source File File System(s): ISO9660, UDF (1.02)
I 16:01:42 Destination Device: [0:0:0] LITE-ON DVDRW SHW-1635S YS0F (J (USB)
I 16:01:42 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x)
I 16:01:42 Destination Media Sectors: 4,173,824
I 16:01:42 Write Mode: DVD
I 16:01:42 Write Type: DAO
I 16:01:42 Write Speed: 2.4x
I 16:01:42 Link Size: Auto
I 16:01:42 Test Mode: No
I 16:01:42 OPC: No
I 16:01:42 BURN-Proof: Enabled
I 16:01:42 Book Type Setting: DVD-ROM
I 16:01:42 Advanced Settings - Force HT: N/A, Online HT: N/A, OverSpeed: N/A, SmartBurn: Yes
I 16:01:42 User Specified L0 Data Zone Capacity: 1,913,760
E 16:03:02 Failed to set L0 Data Zone Capacity!
E 16:03:02 Reason: Power Calibration Area Error
E 16:03:02 Operation Failed! - Duration: 00:01:20
I 16:03:02 Average Write Rate: N/A - Maximum Write Rate: N/A
I 16:05:49 Operation Started!
I 16:05:49 Source File: C:\Documents and Settings\Ali Alrubayai\My Documents\GrabIt Downloads\1224515357\x360-gears2.dvd
I 16:05:49 Source File Sectors: 3,825,924 (MODE1/2048)
I 16:05:49 Source File Size: 7,835,492,352 bytes
I 16:05:49 Source File Volume Identifier: XGD2DVD_NTSC
I 16:05:49 Source File Volume Set Identifier: 34672923
I 16:05:49 Source File Implementation Identifier: Sonic Scenarist 3.1
I 16:05:49 Source File File System(s): ISO9660, UDF (1.02)
I 16:05:49 Destination Device: [0:0:0] LITE-ON DVDRW SHW-1635S YS0F (J (USB)
I 16:05:49 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x)
I 16:05:49 Destination Media Sectors: 4,173,824
I 16:05:49 Write Mode: DVD
I 16:05:49 Write Type: DAO
I 16:05:49 Write Speed: 2.4x
I 16:05:49 Link Size: Auto
I 16:05:49 Test Mode: No
I 16:05:49 OPC: No
I 16:05:49 BURN-Proof: Enabled
I 16:05:49 Book Type Setting: DVD-ROM
I 16:05:49 Advanced Settings - Force HT: N/A, Online HT: N/A, OverSpeed: N/A, SmartBurn: Yes
I 16:05:49 User Specified L0 Data Zone Capacity: 1,913,760
E 16:07:09 Failed to set L0 Data Zone Capacity!
E 16:07:10 Reason: Power Calibration Area Error
E 16:07:10 Operation Failed! - Duration: 00:01:20
I 16:07:10 Average Write Rate: N/A - Maximum Write Rate: N/A

Please help.

[Dialysis1]

Try updating your firmware.

http://www.cdrinfo.com/Sections/Firmware/SingleModel.aspx?DriveId=1193

Better media would also help.
I 16:01:42 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x)
I 16:01:42 Write Speed: 2.4x
You can try burning at 4x.

[Yamiaro]

That site doesn't have my burners specific firmware, YSOF. I'll keep trying but I don't think it will work.

EDIT: Updated firmware but I'm still getting the same error and also burning at different speeds but no luck. Helpies?

[Dialysis1]

Try better media. Your burner may not like that media.
The only reliable DL media is Verbatim DVD+R DL 2.4x (MKM-001-00 dye) made in Singapore.