Some Questions about, DivX, XVid, XMPEG, Flask and GKnot

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • aalamar
    Junior Member
    Junior Member
    • Dec 2002
    • 5

    Some Questions about, DivX, XVid, XMPEG, Flask and GKnot

    Hi,

    I have a little Problem with 2 pass encoding.
    I first tried to encode a DVD with XMPEG to XVid with 2-pass encoding. A short time after the second pass begun XMPEG crashed. Okay - so I tried DivX (5.02) because I heard XVid is some kind of instable. Same Problem. So I changed to flask (0.7 - last build) and tried the same with XVid. Flask crashed. Okay ... Flask and DivX - crash !!!
    Now I tried flask with XVid but I changed to single pass. Wow - It worked.
    Here is what comes out:

    Picture:
    Width 688
    Height 416
    Audio:
    Length 1:50:05
    Bitrate 160 kbit/s
    Audioformat MPEG Layer-3
    Video:
    Pic. Rate 25fps
    Datarate 108kbit/s
    length of videofile 24bit
    Videocodec xvid

    Size of File 702MB

    This is what windows shows me in my explorer.

    So I thought maybe there is a problem with flask and XMPEG. So I searched here and found something about gknot. Okay I thought. Let's give it a try. But as I can see gknot only supports DivX. So I used Divx with 2-pass encoding. And it worked.

    Picture:
    Width 512
    Height 272
    Audio:
    Length 2:04:39 (it was the same movie - why is it longer)
    Bitrate 116 kbit/s (I set it to 128 - why did he use 116)
    Audioformat MPEG Layer-3
    Video:
    Pic. Rate 25fps
    Datarate 94kbit/s
    length of videofile 24bit
    Videocodec DivX

    Size of File 688MB

    Okay - the second file is smaller. But the first file is a great quality. I thought that 2-pass enconding will reduce file size by same (or nearly) same quality.
    I "think" I used the same setting with each tool.

    So my questions are:
    Is XVid better than DivX? (quality and file size)
    Can gknot use XVid?
    Is it (known) a bug that xmpeg and flask crashes with 2-pass encoding?
    Is there a better tool to encode?

    As u see I am a newbee to this. So maybe someone can point me to the right direction... thx in advance

    Aalamar
  • khp
    The Other
    • Nov 2001
    • 2161

    #2
    Re: Some Questions about, DivX, XVid, XMPEG, Flask and GKnot

    Originally posted by aalamar

    Is XVid better than DivX? (quality and file size)
    Only you can answer that.

    Originally posted by aalamar

    Can gknot use XVid?
    No GordianKnot can't use Xvid, but that does not mean that you can't use GordianKnot, to help you encode with XVID. You can find a guide on this at www.doom9.org

    Originally posted by aalamar

    Is it (known) a bug that xmpeg and flask crashes with 2-pass encoding?
    No, many people have successfully used xmpeg/flask for two pass encoding. If you get random crashes durring the encoding, it's most likely caused by system instablity, if it crashes immidiatly after starting encoding, it's most likely a config problem. If it crashes immidiaetly after starting the second pass, I would suspect that it's a problem with your audio conversion.

    Originally posted by aalamar

    Is there a better tool to encode?
    Better ?
    Donate your idle CPU time for something usefull.
    http://folding.stanford.edu/

    Comment

    • Enchanter
      Old member
      • Feb 2002
      • 5417

      #3
      Re: Some Questions about, DivX, XVid, XMPEG, Flask and GKnot

      Originally posted by aalamar
      Hi,

      I have a little Problem with 2 pass encoding.
      I first tried to encode a DVD with XMPEG to XVid with 2-pass encoding. A short time after the second pass begun XMPEG crashed. Okay - so I tried DivX (5.02) because I heard XVid is some kind of instable. Same Problem. So I changed to flask (0.7 - last build) and tried the same with XVid. Flask crashed. Okay ...
      Disable Hinted ME from within XviD's configuration.

      Comment

      • aalamar
        Junior Member
        Junior Member
        • Dec 2002
        • 5

        #4
        Thx for ur help guys...

        @Enchanter: it was turned off

        @khp: It's immediately after beginning with pass 2. So I will do some testing. With other audio settings or completly without audio.

        I'll be back after testing...

        cu and thx
        Aalamar

        Comment

        • HDRed
          Member
          Member
          • Dec 2002
          • 52

          #5
          aalamar, make sure you're not overclocking your CPU - this will make 2-pass mode crash if it's not 100% stable, especially if you set the program at a higher priority.

          download prime95 and run that for about an hour - if it finds an error, there's your problem. if not, you have some sort of software incompatibility.

          Comment

          • aalamar
            Junior Member
            Junior Member
            • Dec 2002
            • 5

            #6
            Thx ...

            I am not overclocking. It is a boxed P4 2.53 with 1 GB RAM. Nothing overclocked. I will look for the tool and will do as u said.

            I did a 2-pass scan with flask without audio decoding (Flask Options/Audio/Don't process audio). It crashed.

            I found now that I have 2 MP3 codecs installed. don't know why but I think I have read something about it and that it will cause errors. But I don't know where and when I have read it.

            I think I will first deinstall nimo codec pack and will look for the codec I need.

            cu
            Aalamar

            Comment

            • khp
              The Other
              • Nov 2001
              • 2161

              #7
              You are using the automatic 2-pass option in Xmpeg right ?

              Try doing a 1-pass encoding. If that works, try starting each of the two passes, in 2-pass encoding, individually (assuming that you didn't already do this).
              Donate your idle CPU time for something usefull.
              http://folding.stanford.edu/

              Comment

              • aalamar
                Junior Member
                Junior Member
                • Dec 2002
                • 5

                #8
                @khp - I think u were right with audio encoding problems. I did a 2 - pass without audio enconding (direct stream copy). It worked. After that I deinstalled nimo codec pack. I reinstalled the DivX Pro 5.02 codec and checked that there is only one mp3 codec installed. I am now at 9% at the second pass. Seems to work...

                thx all
                Aalamar

                Comment

                Working...