Announcement

Collapse
No announcement yet.

How preserve 16:9 when making d2v file with DVD2AVI?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • romulus-v
    Junior Member
    Junior Member
    • May 2003
    • 8

    How preserve 16:9 when making d2v file with DVD2AVI?

    I am new in this job, but I was trying to obtain a d2v file with DVD2AVI and then process it with VFAPI to get a fake avi file.

    DVD2AVI sais that the film is PAL 16:9, but the d2v resulted looks different, is more square. Because of that lengthening, the quality of the image is poor.

    I don't think that I should use the filter "crop" from VirtualDub. Or should I? And if the filter "resize" could do the job, how do I set it up?

    I also tried using the "Clip&Resize" option in dvd2avi, before saving the project, but the resulted d2v looks the same, it isn't 16:9 when opening the file in VirtualDub or Media Player.

    And one more question: after processing the video, do I have to multiplex it with the audio in order to obtain the final avi file?

    Thank you!
  • UncasMS
    Super Moderator
    • Nov 2001
    • 9047

    #2
    vfapi would NOT be my first choice - avisynth is much faster

    here's how to setup dvd2avi:

    Comment

    • romulus-v
      Junior Member
      Junior Member
      • May 2003
      • 8

      #3
      Thank you for the hint!

      I'm not sure, however, what you mean by the fact that avisynth would be faster.
      I haven't used avisynth but vfapi needs just a few seconds to make the fake avi file, from the d2v file made by dvd2avi.

      And concerning the settings of dvd2avi, I have used it exactly like it is indicated in the guide you suggested.

      Comment

      • UncasMS
        Super Moderator
        • Nov 2001
        • 9047

        #4
        of course the creation of the pseudo-avi takes only seconds.
        but avisynth is much better for frameserving than vfapi.

        for the actual encoding process avisynth will work MUCH faster than vfapi - in particular the latest version 2.5x

        Comment

        • romulus-v
          Junior Member
          Junior Member
          • May 2003
          • 8

          #5
          thanks, Uncas

          Comment

          • Mark Strube
            Junior Member
            Junior Member
            • May 2003
            • 7

            #6
            The best way to do this is to leave it in the project file (d2v) from DVD2AVI, and the next program you open it in, just resize it to the proper size. 16:9 and 4:3 are the same size on DVD's (720x480) because DVD players need it to be this size to play properly. If it's 16:9, it just stretches the picture according to what type of television that you have.
            In your case, just open the project file in whatever program you're using, and resize it to 640x360, and then do your neccesary cropping. That will give you the correct aspect ratio.

            Comment

            • UncasMS
              Super Moderator
              • Nov 2001
              • 9047

              #7
              resize it to 640x360
              why this particular resolution?

              there's more than one 16:9 resolution.

              Comment

              • Mark Strube
                Junior Member
                Junior Member
                • May 2003
                • 7

                #8
                I just used that as an example since that's the most popular size. If he so desires he could make it 720x404 and crop it then, or any size in-between or smaller... just do the math. I was just trying to help with the proper resolutions which is what I think he was asking for in the first place.

                Comment

                • UncasMS
                  Super Moderator
                  • Nov 2001
                  • 9047

                  #9
                  mark, my objection did not concern 640 vs 704 or 576

                  16:9 could be 1:1,85 or 1:2,35 or....

                  thus *doing the math* is only possible on the basis of those information.

                  Comment

                  • Mark Strube
                    Junior Member
                    Junior Member
                    • May 2003
                    • 7

                    #10
                    Originally posted by UncasMS
                    mark, my objection did not concern 640 vs 704 or 576

                    16:9 could be 1:1,85 or 1:2,35 or....

                    thus *doing the math* is only possible on the basis of those information.
                    Which is why I told him to do the cropping AFTER he resized it.

                    Comment

                    • romulus-v
                      Junior Member
                      Junior Member
                      • May 2003
                      • 8

                      #11
                      Thank you both of you!
                      I managed to do it right, i.e., in the right format, but the file is too big.
                      I used the bitrate calculator that nandub uses and I entered the bitrate obtained to get a one cd avi. And the resulted file was 1,5 GB. Why?

                      Comment

                      • UncasMS
                        Super Moderator
                        • Nov 2001
                        • 9047

                        #12
                        you must have done something wrong since the calc is quit reliable.

                        any log file you could post?

                        tried gordianknot for setting up your transcoding?

                        Comment

                        Working...
                        😀
                        🥰
                        🤢
                        😎
                        😡
                        👍
                        👎