Tweet
Problems burning DVD backup using Nero
I am trying to burn back up DVD files from my harddrive. The burning process runs fine (Nero show 100% completed), till at the end I get ' Burn Process Failed error'. Have wasted two DVD's. The log is :
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.25 (Nero Express)
Recorder: <_NEC DVD+RW ND-1100A> Version: 108B - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD+RW ND-1100A >Version: 108B - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC35L060AVV207-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+RW ND-1100A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 48MB (49848kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.10.2004
UDF/ISO compilation
11:44:20 PM #1 Phase 112 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation started
11:44:21 PM #2 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VIDEO_TS.IFO has been modified
11:44:21 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VIDEO_TS.BUP has been modified
11:44:21 PM #4 Phase 113 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation completed
11:44:21 PM #5 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
11:44:21 PM #6 Phase 111 File dlgbrnst.cpp, Line 1855
DVD-Video files sorted
11:44:21 PM #7 Text 0 File Reader.cpp, Line 126
Reader running
11:44:21 PM #8 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD+RW ND-1100A running
11:44:21 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
11:44:21 PM #10 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
11:44:21 PM #11 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
11:44:22 PM #12 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2257872 (501:44.72, 4409MB)
11:44:22 PM #13 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
11:44:22 PM #14 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: _NEC DVD+RW ND-1100A, Media type: DVD+RW
Disc Manufacturer ID: INFODISC, Media Type ID: A01, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 0
11:44:22 PM #15 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:44:22 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2257872 (2257872) = #2257872/501:44.72
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2257872 blocks [_NEC DVD+RW ND-1100A ]
1: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (0) not provided
original disc pos #0 + 1 (1) = #1/0:0.1
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1 blocks [_NEC DVD+RW ND-1100A ]
--------------------------------------------------------------
11:44:22 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD+RW ND-1100A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624121856, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 4624121856 4624121856 4624123904, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2257872 | 2 | 0 | 0x00 | 0x41
2257872 | 2 | 1 | 0x00 | 0x41
2257873 | lead-out | 1 | 0x00 | 0x41
11:44:23 PM #18 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
11:44:23 PM #19 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
11:44:23 PM #20 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
11:44:23 PM #21 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 2.4x (3,324 KB/s)
11:44:23 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:44:23 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:44:23 PM #24 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 3502F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: INFODISC
Media type ID: A01
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 00 49 4E 46 4F 44 - 49 53 43 41 30 31 02 39 ...INFODISCA01.9
23 00 8E 7A 56 02 1A 00 - 90 83 64 02 1E 00 86 7E #..zV.....d....~
5E 02 1E 04 04 10 F0 00 - 00 00 00 00 00 00 00 00 ^...............
11:44:23 PM #25 SCSI -1065 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x035B7000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
11:44:23 PM #26 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 23:31,620 (1411620ms) -> OK
11:44:23 PM #27 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
12:07:04 AM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:07:59 AM #29 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD+RW ND-1100A > start writing Lead-Out at LBA 1 (1h), lenght 0 blocks
12:08:00 AM #30 SCSI -1135 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x08070000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x22 0x73 0xCF 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
12:08:00 AM #31 CDR -1135 File Writer.cpp, Line 304
Write error
12:08:00 AM #32 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:08:01 AM #33 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
12:08:01 AM #34 SCSI -1065 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x035B5000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
12:08:01 AM #35 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
12:08:01 AM #36 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 2.4x (3,324 KB/s)
Thanks..
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.25 (Nero Express)
Recorder: <_NEC DVD+RW ND-1100A> Version: 108B - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD+RW ND-1100A >Version: 108B - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC35L060AVV207-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+RW ND-1100A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 48MB (49848kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.10.2004
UDF/ISO compilation
11:44:20 PM #1 Phase 112 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation started
11:44:21 PM #2 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VIDEO_TS.IFO has been modified
11:44:21 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 543
Content of VIDEO_TS.BUP has been modified
11:44:21 PM #4 Phase 113 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation completed
11:44:21 PM #5 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
11:44:21 PM #6 Phase 111 File dlgbrnst.cpp, Line 1855
DVD-Video files sorted
11:44:21 PM #7 Text 0 File Reader.cpp, Line 126
Reader running
11:44:21 PM #8 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD+RW ND-1100A running
11:44:21 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
11:44:21 PM #10 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
11:44:21 PM #11 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
11:44:22 PM #12 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2257872 (501:44.72, 4409MB)
11:44:22 PM #13 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
11:44:22 PM #14 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: _NEC DVD+RW ND-1100A, Media type: DVD+RW
Disc Manufacturer ID: INFODISC, Media Type ID: A01, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 0
11:44:22 PM #15 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:44:22 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2257872 (2257872) = #2257872/501:44.72
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2257872 blocks [_NEC DVD+RW ND-1100A ]
1: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (0) not provided
original disc pos #0 + 1 (1) = #1/0:0.1
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1 blocks [_NEC DVD+RW ND-1100A ]
--------------------------------------------------------------
11:44:22 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD+RW ND-1100A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624121856, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 4624121856 4624121856 4624123904, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2257872 | 2 | 0 | 0x00 | 0x41
2257872 | 2 | 1 | 0x00 | 0x41
2257873 | lead-out | 1 | 0x00 | 0x41
11:44:23 PM #18 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
11:44:23 PM #19 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
11:44:23 PM #20 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
11:44:23 PM #21 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 2.4x (3,324 KB/s)
11:44:23 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:44:23 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:44:23 PM #24 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 3502F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: INFODISC
Media type ID: A01
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 00 49 4E 46 4F 44 - 49 53 43 41 30 31 02 39 ...INFODISCA01.9
23 00 8E 7A 56 02 1A 00 - 90 83 64 02 1E 00 86 7E #..zV.....d....~
5E 02 1E 04 04 10 F0 00 - 00 00 00 00 00 00 00 00 ^...............
11:44:23 PM #25 SCSI -1065 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x035B7000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
11:44:23 PM #26 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 23:31,620 (1411620ms) -> OK
11:44:23 PM #27 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
12:07:04 AM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:07:59 AM #29 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD+RW ND-1100A > start writing Lead-Out at LBA 1 (1h), lenght 0 blocks
12:08:00 AM #30 SCSI -1135 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x08070000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x22 0x73 0xCF 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
12:08:00 AM #31 CDR -1135 File Writer.cpp, Line 304
Write error
12:08:00 AM #32 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:08:01 AM #33 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
12:08:01 AM #34 SCSI -1065 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x035B5000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
12:08:01 AM #35 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
12:08:01 AM #36 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 2.4x (3,324 KB/s)
Thanks..
Comment