Will not finish burn anymore!

[Daral]

Hello everyone,

I know there must be a simple solution, but for some reason I get this message during a DVD burn:


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28/07/2004 16:51:12
Nero API version: 6.6.0.1
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DW-U50A> Version: 1.5g - HA 1 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-U50A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD RW DW-U50A E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 509MB (521712kB)
Free physical memory: 109MB (112536kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.11.2004
NeroAPI
19:39:04 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

19:39:05 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

19:39:05 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

19:39:05 #4 Text 0 File Reader.cpp, Line 127
Reader running

19:39:05 #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-U50A running

19:39:05 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

19:39:05 #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

19:39:05 #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

19:39:05 #9 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-At-Once, using DVD media

20:31:43 #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286175 (508:02.25, 4465MB)

20:31:43 #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO

20:31:43 #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: SONY DVD RW DW-U50A, Media type: DVD-R
Disc Manufacturer: VDSPMS - AB 01
Disc Application Code: 64, Disc Physical Code: 193

20:31:43 #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

20:31:43 #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286176 (2286176) = #2286176/508:2.26
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286176 blocks [SONY DVD RW DW-U50A]
--------------------------------------------------------------

20:31:43 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [SONY DVD RW DW-U50A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682088448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286176 | lead-out | 1 | 0x00 | 0x41

20:31:44 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

20:31:44 #17 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

20:31:44 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

20:31:44 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 1x (1,385 KB/s)

20:31:44 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:31:44 #21 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode

20:31:44 #22 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Power-Burn -> ON

20:31:44 #23 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes

20:31:44 #24 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20:31:48 #25 Text 0 File Cdrdrv.cpp, Line 1284
20:31:48.453 - SONY DVD RW DW-U50A\H1 T0 : Queue again later

20:33:22 #26 Text 0 File Cdrdrv.cpp, Line 1284
20:33:22.859 - SONY DVD RW DW-U50A\H1 T0 : Queue again later

20:33:23 #27 Text 0 File Cdrdrv.cpp, Line 1284
20:33:23.515 - SONY DVD RW DW-U50A\H1 T0 : Queue again later

20:33:23 #28 Text 0 File Cdrdrv.cpp, Line 1284
20:33:23.593 - SONY DVD RW DW-U50A\H1 T0 : Queue again later

20:33:23 #29 Text 0 File Cdrdrv.cpp, Line 1284
20:33:23.640 - SONY DVD RW DW-U50A\H1 T0 : Queue again later

20:33:23 #30 Text 0 File Cdrdrv.cpp, Line 1284
20:33:23.671 - SONY DVD RW DW-U50A\H1 T0 : Queue again later

20:33:23 #31 Text 0 File Cdrdrv.cpp, Line 1284
20:33:23.734 - SONY DVD RW DW-U50A\H1 T0 : Queue again later

20:33:23 #32 Text 0 File Cdrdrv.cpp, Line 1284
20:33:23.781 - SONY DVD RW DW-U50A\H1 T0 : Queue again later

20:33:23 #33 Text 0 File Cdrdrv.cpp, Line 1284
20:33:23.812 - SONY DVD RW DW-U50A\H1 T0 : Queue again later

20:45:53 #34 Text 0 File Cdrdrv.cpp, Line 1284
20:45:53.031 - SONY DVD RW DW-U50A\H1 T0 : Queue again later

20:45:59 #35 SCSI -1135 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00BB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x08
CDB Data: 0x2A 0x00 0x00 0x07 0xC3 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x07 0xBA 0xD3 0x12
0x00 0x00 0x00 0x00 0x0C 0x08

20:45:59 #36 CDR -1135 File Writer.cpp, Line 311
Write error

20:45:59 #37 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

20:45:59 #38 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

20:45:59 #39 Text 0 File DVDR.cpp, Line 2410
EndDAO: Last written address was 508831

20:45:59 #40 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 1x (1,385 KB/s)

20:45:59 #41 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

20:45:59 #42 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.53a, size=17136 bytes, created 03/06/2003 01:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13/09/2004 11:54:06 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13/09/2004 11:54:46 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13/09/2004 11:58:10 (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

I haven't a clue what it means or why it has started happening. I'm new to this and have only used the software (V3.2) 3 or 4 times. It was fine up until now! I don't think I've changed anything. It just going wrong and is costing a small fortune in blank DVD's!

Any help or suggestions will be greatly appreciated. Many thanks.

Daral.

[cynthia]

Basic - your burner don't like your brand of discs.

Have you began to use a new spindle of the old media?

[setarip]

It's probably advisable to remove your registration number from the top of your post.

[Daral]

Originally posted by cynthia
Basic - your burner don't like your brand of discs.

Have you began to use a new spindle of the old media?

Thank you for your response. I'm not really sure how to reply so will give this a try!

That makes perfect sense. The DVD's I purchased were very little money and that's obviously why! I haven't started a new bundle. Sounds like the blank DVD's are unreliable. I shall buy some more today!!

Is there a brand/type you would suggest for RIP?

[Daral]

Originally posted by setarip
It's probably advisable to remove your registration number from the top of your post.

I have taken your advise. Thank you for your response, it's much appreciated.

[setarip]

"Thank you for your response, it's much appreciated."

My pleasure ;>}