Announcement

Collapse
No announcement yet.

DVD Shrink and Nero have problems burning with some disks.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ccanalia
    Junior Member
    Junior Member
    • Mar 2005
    • 14

    DVD Shrink and Nero have problems burning with some disks.

    I am really frustrated and I dont know what to do. I am backing up DVD's and have no problems with some and have problems with others. I dont know what the problem is but it appears that it is not the DVDs that I am using.

    I am using I/O Magic 16X Dual Format/Double Layer DVD±RW/±R.

    Does anyone have any idea what the problem could be? I have upgraded my Nero and my firmware on my DVD burner. I have unistalled other DVD burning utilities such as DVD XCopy Xpress and Sonic MyDVD. I have read other posts and cannot seem to figure what I am doing wrong.

    Here is the log.


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
    Nero API version: 6.6.0.8
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <DVDRW IDE 16X> Version: A07R - HA 3 TA 0 - 6.6.0.8
    Adapter driver: <> HA 3
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8483B atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TOSHIBA DVD-ROM SD-M1212 atapi Port 0 ID 1 DMA: Off
    DiskPeripheral : WDC WD1600JD-00FYB0 atapi Port 1 ID 0 DMA: On
    DiskPeripheral : WDC WD400JD-75HKA1 atapi Port 2 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST CD-ROM GCR-8483 E: CDRom0
    DVDRW IDE 16X G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 39845888 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 246MB (251996kB)
    Free physical memory: 77MB (79660kB)
    Memory in use : 68 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    12.3.2005
    NeroAPI
    7:22:20 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    7:22:21 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    7:22:21 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    7:22:21 PM #4 SCSI -1196 File Cdrdrv.cpp, Line 1181
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x017A5400
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x3A
    Sense Qual: 0x02
    CDB Data: 0xFA 0x01 0x00 0x00 0x00 0x00 0x00 0x04 0x00 0x00 0xAA 0xFF
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x3A 0x02

    7:22:21 PM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    7:22:21 PM #6 Text 0 File Writer.cpp, Line 122
    Writer DVDRW IDE 16X running

    7:22:21 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    7:22:21 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    7:22:21 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    7:22:21 PM #10 Text 0 File Burncd.cpp, Line 3153
    Turn on Disc-At-Once, using DVD media

    7:24:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286111 (508:01.36, 4465MB)

    7:24:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 271
    Write in overburning mode: NO

    7:24:00 PM #13 Text 0 File DlgWaitCD.cpp, Line 2316
    Recorder: DVDRW IDE 16X, Media type: DVD-R
    Disc Manufacturer: MUST 0 - 01
    Disc Application Code: 64, Disc Physical Code: 193

    7:24:00 PM #14 Text 0 File DlgWaitCD.cpp, Line 433
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)

    7:24:00 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [DVDRW IDE 16X]
    --------------------------------------------------------------

    7:24:00 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [DVDRW IDE 16X] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286112 | lead-out | 1 | 0x41 | 0x00

    7:24:00 PM #17 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    7:24:00 PM #18 Text 0 File Burncd.cpp, Line 4040
    Cache writing successful.

    7:24:00 PM #19 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    7:24:00 PM #20 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 4x (5,540 KB/s)

    7:24:00 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    7:24:00 PM #22 Text 0 File DVDR.cpp, Line 2194
    Recording mode: Sequential Recording Mode

    7:24:00 PM #23 Text 0 File Mmc.cpp, Line 21235
    Set BUFE: Super Link -> ON

    7:24:01 PM #24 Text 0 File DVDR.cpp, Line 2340
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:24:01 PM #25 Text 0 File Cdrdrv.cpp, Line 8430
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    7:24:01 PM #26 CDR -1207 File DVDR.cpp, Line 4772
    Book Type automatically set to: Current recorder setting

    7:24:08 PM #27 Text 0 File Cdrdrv.cpp, Line 1287
    19:24:08.953 - DVDRW IDE 16X\H3 T0 : Queue again later

    7:24:12 PM #28 SCSI -500 File Cdrdrv.cpp, Line 1435
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x01650000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    7:24:12 PM #29 SCSI -1114 File Cdrdrv.cpp, Line 1435
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x05D71400
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x29 0x00

    7:24:12 PM #30 CDR -1114 File Writer.cpp, Line 311
    Reset occurred

    7:24:12 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    7:24:12 PM #32 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    7:24:13 PM #33 Text 0 File DVDR.cpp, Line 2603
    EndDAO: Last written address was 607

    7:24:13 PM #34 Text 0 File DVDR.cpp, Line 5408
    Drive: DVDRW IDE 16X
    Book Type request [BTC]: DVD+RW
    Changing the Book Type was finished successfully, return code 0

    7:24:13 PM #35 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 4x (5,540 KB/s)

    7:24:13 PM #36 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    7:24:13 PM #37 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
    File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 9:53:04 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 1/12/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    Thanks for the help anyone can provide.


    ~Chris
  • setarip
    Retired
    • Dec 2001
    • 24955

    #2
    "Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................"

    This list of nothing but zeroes means that NERO is not recognizing the burnable media.

    You might also consider using known quality burnable media, such as Ritek, Ridata, Verbatim, Maxell...

    You might want to go to the burner's manufucturer's website and download and install the latest firmware update available for your specific model...

    Comment

    • jmet
      Super Moderator
      • Nov 2002
      • 8697

      #3
      "Media Specific [16..63]:
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................"
      Your burner doesn't like the brand of media you are using. I am guessing its a cheaper brand of media. I suggest in Ritek Ridata brand media or Verbatim media.

      "Book Type request [BTC]: DVD+RW
      Changing the Book Type was finished successfully, return code 0
      "
      "Recorder: DVDRW IDE 16X, Media type: DVD-R"
      Do not change the booktype for DVD-R media. Only for DVD+R media.

      Check out this link: http://forum.digital-digest.com/show...threadid=45942

      Comment

      • ccanalia
        Junior Member
        Junior Member
        • Mar 2005
        • 14

        #4
        booktype

        I am not entirely familiar with what "changing the booktype" is. Do I have to specify to the software what type of DVD media I have. And if so how am I supposed to do this?

        ~Chris

        Comment

        • Experi-Mentor
          Digital Video Master
          Digital Video Master
          • Nov 2004
          • 1456

          #5
          ## File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 1/12/2005 2:03:00 AM (Prassi/Veritas driver for win 2K) ##
          also, you have rpassi/veritas (PXHELP20.SYS) driver on your system, which in most cases doesn't work good together with nero.

          Comment

          • ccanalia
            Junior Member
            Junior Member
            • Mar 2005
            • 14

            #6
            How do you remove something like that?

            ~C

            Comment

            Working...
            😀
            🥰
            🤢
            😎
            😡
            👍
            👎