Announcement

Collapse
No announcement yet.

Latest DVD Rebuilder versions

Collapse
This topic is closed.
X
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • UncasMS
    Super Moderator
    • Nov 2001
    • 9047

    #16
    Professional Edition 1.09

    Professional Edition 1.09

    March 18th, 2006 (v1.09)

    CHANGES MADE TO PRO VERSION

    - NEW FEATURE: Support for closed captions. Now DVD-RB
    will extract closed caption data from the original DVD
    and remultiplex it into the MPEG stream during REBUILD.
    Note that, although this new code has been tested, it
    is new and therefore should be considered beta for
    this version. For that reason it can only be enabled
    by adding the "hidden" setting "CLOSED_CAPTIONS=1" to
    the [Options] area of the REBUILDER.INI file. WARNING:
    Many software players do NOT play CC correctly. Please
    do not post bug reports unless you first also try to
    play the original disc with the software player (e.g.
    PowerDVD 6.0 seems to have problems with certain CC).

    - ENHANCEMENT: Added code to enhance the functioning of
    automatic "no reencoding" feature introduced in v1.08.
    Now any space reallocated due to "Steal Space" or the
    "Half/Half" functions that is not needed to enable the
    "no reencoding" extraction is returned to the Extras.
    This allows you to "overkill" in order to force
    extraction -- but the amount of actual reduction will
    only be what is truly necessary.

    - Fixed an error in which specific circumstances could
    cause highlights in a menu to not display when the
    rebuild of the menu cell immediately follows another
    cell that uses the same VOBID/CELLID combination.

    - Corrected a bug in which, under unusual circumstances,
    a one byte difference can occur between matching BUP
    and IFO files.

    - Fixed an error that could occur very rarely and cause
    a report of error: "00032 00009 -- error reading IFO".

    - Fixed a bug in which restarting the ENCODE phase
    following a previous completion was not reseting the
    progress flag, causing problems in future pauses.

    - Corrected some inconsistencies with the way menus are
    handled in the Segment Viewer/Editor.

    - Fixed a problem in which selecting "Movie and Menus"
    could very rarely blank a menu that is a part of a
    VTS other than the one containing the feature.

    - Added a "Close at REBUILD Completion" option to the
    Mode menu and a "Close at Batch Completion" option to
    the file menu. These will close DVD-RB -- but will not
    shutdown the computer.

    Comment

    • UncasMS
      Super Moderator
      • Nov 2001
      • 9047

      #17
      Professional Edition 1.09.2

      Professional Edition 1.09.2

      March 18th, 2006 (v1.09.2)

      - Fixed an error in the closed captions code that could
      corrupt the MPEG stream causing blocky video playback.
      Please note that the closed captioning code should
      still be considered "beta" and should only be enabled
      by those wishing to test and verify its integrity.

      - Fixed a bug in which closed captions were not being
      enabled in the IFO file for movie-only encodes.

      - Fixed a problem that could make Closed Captions play
      haphazardly when used against a telecined source.

      - Corrected an error in which Closed Caption data was
      being incorrectly inserted for "No Compression" and
      ReJig modes.

      - Corrected a problem in which an IFO that has no PGCs
      defined could cause DVD-RB to stop with an error
      message ("0032 0009").

      - Corrected the syntax of the status output when setting
      for DVD-9. The log incorrectly says "DVD-5".

      Comment

      • UncasMS
        Super Moderator
        • Nov 2001
        • 9047

        #18
        Freeware Version 0.97

        Freeware Version 0.97

        Below is a summary of the changes/updates associated with this version (Freeware release):

        - Fixed an error that, under certain circumstances, might cause video ticks or stutter at chapter or segment break points.

        - Fixed a sizing issue in which unreferenced audio streams that exist in the original VOB files were included in the output -- but weren't properly accounted for in the size calculation.

        - Corrected an error that could result in "Error 0006, Framecount differences..." when working with the null output of some ripping programs.

        - Corrected an error in which an erroneous input stream might cause DVD-RB to "hang" during PREPARE phase looking for a nonexistent extension start code.

        - Corrected an issue in which certain odd original anomalies might cause timing issues.

        - Updated the Installer to use a newer version of HC Encoder (v0.17). This file is also included in the "Update Only" zip file.

        - Updated installer to use EclPro v0.52. Includes better compatibility and support for Express versions.

        - Updated the installation package to install ReJig v0.5f. This version includes several updates that give quality improvements that were implemented by DragonGodz.

        - Fixed a sizing issue in which unreferenced audio streams that exist in the original VOB files were included in the output -- but weren't properly accounted for in the size calculation.

        - Modified the ReJig calling procedure so that DVD-RB uses less processor time during calls. This should speed up ReJig.

        - Corrected a problem in which the calculated bitrate may exceed the original and as a result make the stream incompatible with the audio on some sources. This would have shown itself as "stutter" during playback.

        - Added coding for handling "garbage" sectors that were found to have caused problems during the PREPARE phase on at least one disc. Thanks to SpazzHH for finding a disc in which it was repeatable.

        - Corrected a Button Over Video (BOV) issue. In some very active streams BOV may not have been reproduced properly.

        - Corrected an error in the REBUILD module that could misinterpret certain input streams and as a result, throw a "ERROR 006: DVD-RB...framecount differences" error.

        - Fixed a problem in which an extremely unlikely set of circumstances might cause audio to move out of sync over the course of a segment.

        Comment

        • UncasMS
          Super Moderator
          • Nov 2001
          • 9047

          #19
          Professional Edition 1.09.3

          Professional Edition 1.09.3

          April 30th, 2006 (v1.09.3)
          CHANGES MADE TO PRO VERSION
          - Added direct support for AutoQMatEnc. Please note that DVD-RB only enables support when it can determine the application path. It will assume the default path "c:\program files\autoqmatenc\autoqmatenc.exe" unless overridden via registry entry. AutoQMatEnc can be downloaded from http://www.autoqmatenc.com.

          - Updated the installation package to include the latest HC Encoder version (v.18).

          - Fixed a bug in which cells that contain no video data might result in "VOB/CELL not found" during rebuild.

          - Fixed an error in which ILVU video segments that are extracted (because the disc will fit) can become corrupt and cause strange playback behavior.

          - Corrected an error in which "garbage" data following null or padding sectors could result in unpredictable
          timing and/or desynchronization.

          - Fixed "Error 53" that could occur when no M2V file was created during the ENCODE phase after three tries. The error was typically caused by an incorrect encoder path and should have issued a more informative "Failed to Create an M2V" file and exited gracefully.

          - Corrected sizing calculations on discs containing null or padding sectors (usually inserted by a decrypter) to help prevent possible (slight) undersizing.

          - Added code to reduce the likelihood of "Error #0006" on streams that contain embedded MPEG garbage. Also, as investigation showed that these only happen in "orphaned" MPEG sections (following "null sectors" created by a decrypter) that are never actually decoded, the error has been removed and replaced by a warning in the STATUS window/log.

          - Added code to remove DVD-RB from a minimized state just before executing a shutdown sequence. There are reports that the shutdown dialog "freezes" with the "5 seconds" text showing when attempted while minimized.

          - Implemented a change that can reduce the likelihood of "Error #0003, buffer overflow" on oddly formatted source streams.

          - Fixed an error in which it is feasible (but rare) that logging of a start code at the very end of a VTS might be missed during PREPARE.

          - Corrected an error in CC processing that could cause an error "0068 0005" when a new GOP with CC data starts at at the very end of a video packet.

          - Made several process improvements to the handling of sequence_end_codes and associated end actions.

          - As closed captioning support appears to be stable, it has been removed from "beta" status and can now be enabled/disabled from the "Settings" menu.

          - Added code to avoid confusion by disabling menu selection of encoders for which no path is present in the setup.
          Last edited by UncasMS; 1 May 2006, 06:42 PM.

          Comment

          • UncasMS
            Super Moderator
            • Nov 2001
            • 9047

            #20
            Professional Edition 1.10.1

            Professional Edition 1.10.1

            July 1st, 2006 (v1.10.1)
            CHANGES MADE TO PRO VERSION

            - Newly updated and improved Segment Editor/Viewer. You
            can now adjust reduction percentages using a slider.
            The new viewer also improves the viewability and ease of
            use for editing and makes several other future features
            possible. Note that the editor is BETA. It is meant to
            be tested (only) in this version. For that reason you
            must manually select "Use Beta (test) Viewer/Editor"
            under the "Settings" menu to enable it.

            - Corrected an error in menu reencoding in which some
            STILL menus might show momentarily (on certain
            specific players) and then exit.

            - Changed defaults in the Viewer/Editor so that "Show
            Extras Only" is no longer the default.

            - Fixed a bug in which extraction of ILVU sections when
            a source requires no encoding might receive "corrupt"
            source warnings and report other unpredictable errors.

            - Corrected an error in which the AutoQMatEnc version
            many not be collected when the path is obtained from
            the INI file.

            - Removed the "Special Error Processing" option. It no
            longer serves a purpose.

            - Corrected an error in which some small VTSs may not be
            blanked or stilled when selecting "Movie and Menu Only"
            or "Movie, Menus, and Slideshow Extras".

            - Fixed a bug in which the value set into vobu_se_e_ptm
            could be incorrectly calculated and might possibly
            result in odd menu behavior on some players.

            - Corrected a bug in which the number of passes selection
            in the AutoQMatEnc advanced screen was disabled when CCE
            Basic was checked.

            - Improved the method for inserting NAVPACKs related to
            STILL processing.

            - Added a horizontal scroll bar to filter editor so long
            filters are kept on one line during editing.

            - Added code to prevent a very rare cell transition timing
            anomaly that can occur when the source contains an
            irregularity.

            - Updated QuEnc version included in the installer to v0.70

            - Other minor bug and cosmetic fixes.

            - Corrected an error in which clicking on the MENUS option
            when no menus were being reencoded could cause a "Runtime
            Error 13". (v1.10.1)

            Comment

            • UncasMS
              Super Moderator
              • Nov 2001
              • 9047

              #21
              Professional Edition 1.10.2

              Professional Edition 1.10.2

              July 3rd, 2006 (v1.10.2)
              CHANGES MADE TO PRO VERSION

              - Fixed a problem with the new editor in which automatic
              blanking and slideshow that is executed when "Movie and
              Menus" or "Move, Menus, and Slideshow Extras" was
              not reallocating saved space to the feature. This only
              happened when "Use Beta (test) Viewer/Editor" was selected.
              Extreme undersizing of output could occur.

              - Corrected a bug introduced in v1.10 that was related to
              the new Viewer/Editor. This bug could result in "Corrupt
              stream" message when using one of the "Movie and Menus" or
              "Move, Menus, and Slideshow Extras" modes was selected. It
              could also cause these modes to fail.

              - Corrected an error in which clicking on the MENUS option
              when no menus were being reencoded could cause a "Runtime
              Error 13". (v1.10.1)

              Comment

              • UncasMS
                Super Moderator
                • Nov 2001
                • 9047

                #22
                Professional Edition 1.10.3

                Professional Edition 1.10.3

                August 11th, 2006 (v1.10.3)

                CHANGES MADE TO PRO VERSION

                - Added routines to recognize and ignore extraneous files in
                the source directory -- including unreferenced VTSs that
                serve no purpose except to occupy space.

                - Fixed "Runtime Error 6" that can occur during rebuild when
                dealing with very small M2V files under specific conditions.

                - Corrected a problem in which, under specific circumstances,
                ILVU segments for angles that are encoded with CCE may not
                be encoding with necessary GOP restrictions.

                - Fixed an error in which pointers in the SML_AGLI table
                could incorrectly set some block pointers to NEXT_ILVU + 1
                rather then NEXT_ILVU. This could cause a momemtary audio
                or video "jump" when switching angles.

                - Tweaked several ILVU settings to ensure strict compliance.

                - Added code to verify paths in INI. This will prevent the
                occurance of Runtime Error '52' and Runtime Error '76' when
                invalid paths are manually entered into the INI file.

                - Fixed a bug in which the completion status bar may not be
                updated to reflect 100% at the end of PREPARE.

                - Updated the installer to include AVISYNTH v2.5.6. It will
                NOT, however, overwrite your existing AVISYNTH installation
                so it it recommended that if you want to upgrade to this
                newer version -- you must first uninstall AVISYNTH using
                the Windows Control Panel.

                - Added Rebuilder version information to AVS, INF, and LOG
                files to make debugging easier.

                - Corrected a bug in which detection of the AutoQMatEnc path
                may not have worked properly on some non-English systems.

                - Corrected an error in which "Runtime Error '52'" may occur
                at startup on systems that use drives other than "C:" as
                the root.

                - Fixed a command line incompatibility issue with early
                versions of QuEnc.

                - Added an optional alternate output path for ISO creation.
                By adding "ISO_OUTPUT=" (and a path) to the "[Paths]" area
                of the REBUILDER.INI you can redirect output to a path or
                drive other than the output directory.

                - Updated the installer to include the latest QuEnc v0.71.

                - Fixed other minor/cosmetic bugs.

                Comment

                • blutach
                  Not a god of digital video
                  • Oct 2004
                  • 24627

                  #23
                  DVDRB Pro 1.10.4 - 22 August 2006

                  August 22nd, 2006 (v1.10.4)

                  CHANGES MADE TO PRO VERSION

                  - Added a new "ImgBurn Directly to Disc (No ISO)" option
                  under the "Mode" menu. When selected this option will, at
                  then end of DVD file creation, automatically burn to disc
                  using the newest version of ImgBurn. Note -- the option
                  is only enabled if you have ImgBurn v2.0.0.0 or greater
                  installed on your computer. No ISO file will be created
                  on your hard drive when using this option. ImgBurn is
                  highly recommended and can be downloaded at www.imgburn.com.

                  - Modified the "Check Latest Version" option under the "Help"
                  menu. It now brings you to a "Download" page. This is
                  meant to make it easier for registered users to check for
                  and obtain the most recent version.

                  - Corrected an error that prevented OPV mode from working
                  correctly for AutoQMatEnc. The result in previous versions
                  would have been multiple passes regardless of the setting.

                  - Added code for checking and adjusting for Pan & Scan mode
                  in menu creation. This should correct the problem on
                  certain players where menu video appears horizontally
                  compressed and button placement appears off.

                  - Added code to recognize and exclude unreferenced cells.
                  This can improve picture quality by reallocated wasted
                  space to referenced cells. In addition it can prevent
                  processing confusion and audio missynchronization that
                  can occur as a result of insertion of unreferenced cells.

                  - Updated the AutoQMatEnc Advanced settings dialog so it
                  supports enabling/disabling automatic bias. The bias now
                  affects the outcome (before AutoBias was always in effect).

                  - Made prediction improvements in calculations for one pass
                  (Q and CQ) encoding. Note: Setting higher-than-standard
                  target sizes increases the likelihood of oversizing. This
                  new OPOV algorithm targets more closely.

                  - Modified code to provide greater compatibility with newest
                  version (2.0.0.0) of ImgBurn.

                  - Other minor/cosmetic changes.
                  Les

                  Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

                  Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
                  [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

                  Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

                  Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


                  You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

                  Explore the sites and the programs - there's a gold mine of information in them

                  Don't forget to play the Digital Digest Quiz!!! (Click here)

                  Comment

                  • UncasMS
                    Super Moderator
                    • Nov 2001
                    • 9047

                    #24
                    Professional Edition 1.10.5

                    Professional Edition 1.10.5

                    HISTORY:
                    August 23rd, 2006 (v1.10.5)
                    CHANGES MADE TO PRO VERSION
                    - Corrected an error introduced in Pan & Scan support that
                    could cause "...error getting MPG start code. [02:53:59]
                    00070 00006"
                    - Corrected an issue in which writing directly to disc using
                    ImgBurn would create a "Pause" for display of image details
                    and required user intervention in order to continue.

                    August 22nd, 2006 (v1.10.4)
                    CHANGES MADE TO PRO VERSION
                    - Added a new "ImgBurn Directly to Disc (No ISO)" option
                    under the "Mode" menu. When selected this option will, at
                    then end of DVD file creation, automatically burn to disc
                    using the newest version of ImgBurn. Note -- the option
                    is only enabled if you have ImgBurn v2.0.0.0 or greater
                    installed on your computer. No ISO file will be created
                    on your hard drive when using this option. ImgBurn is
                    highly recommended and can be downloaded at www.imgburn.com.
                    - Modified the "Check Latest Version" option under the "Help"
                    menu. It now brings you to a "Download" page. This is
                    meant to make it easier for registered users to check for
                    and obtain the most recent version.
                    - Corrected an error that prevented OPV mode from working
                    correctly for AutoQMatEnc. The result in previous versions
                    would have been multiple passes regardless of the setting.
                    - Added code for checking and adjusting for Pan & Scan mode
                    in menu creation. This should correct the problem on
                    certain players where menu video appears horizontally
                    compressed and button placement appears off.
                    - Added code to recognize and exclude unreferenced cells.
                    This can improve picture quality by reallocated wasted
                    space to referenced cells. In addition it can prevent
                    processing confusion and audio missynchronization that
                    can occur as a result of insertion of unreferenced cells.
                    - Updated the AutoQMatEnc Advanced settings dialog so it
                    supports enabling/disabling automatic bias. The bias now
                    affects the outcome (before AutoBias was always in effect).
                    - Made prediction improvements in calculations for one pass
                    (Q and CQ) encoding. Note: Setting higher-than-standard
                    target sizes increases the likelihood of oversizing. This
                    new OPOV algorithm targets more closely.
                    - Modified code to provide greater compatibility with newest
                    version (2.0.0.0) of ImgBurn.
                    - Other minor/cosmetic changes.

                    Comment

                    • UncasMS
                      Super Moderator
                      • Nov 2001
                      • 9047

                      #25
                      Professional Edition 1.10.6

                      DVD ReBuilder v1.10.6
                      September 7th, 2006 (v1.10.6)

                      CHANGES MADE TO PRO VERSION

                      - Multiple instance encoding is now supported for
                      AutoQmatEnc as well as HC, QuEnc, and ProCoder. Note:
                      This requires AQE version 0.33 or greater. You can
                      download it from www.autoqmatenc.com.

                      - Corrected an issue in which a non-zero value in a
                      RESERVED section of the DSI_GI table of a NAVPACK could
                      erroneously cause cells to be flagged as unreferenced.
                      This condition doesn't seem to occur in any commercial
                      discs -- but does appear in discs authored using "ULEAD
                      DVD MovieFactory".

                      - Improved the sizing slider for the beta Viewer/Editor.
                      Added a "<" and ">" for small upward and downward sizing.
                      This should help get the value to exactly what you might
                      decide is perfect.

                      - Made several processing improvements to the Viewer/Editor.

                      - Added a menu item "Allocate Saved Space to Feature" to the
                      beta Viewer/Editor. This will take any unused space
                      recovered through lowering bitrates, setting "Blank" etc.
                      and allocate it to the feature VTS.

                      - Added a menu item "Reset to Default" to the beta Viewer/
                      Editor. This will remove all actions and reset to the
                      state before any blanking, etc. has taken place.

                      - Added a "hidden" setting, "DISABLE_UNREFERENCED_REMOVAL".
                      This allows you to keep unreferenced cells and VTSs if for
                      some reason it becomes necessary. By default DVD-RB
                      removes any video/audio that, based upon the IFOs, is not
                      actually used on the DVD.

                      - Fixed an inconsistency in the IFO's VTS_PTT_SRPT table
                      that could happen during movie-only encodes.

                      - Added support for CCE SP2 (Trial). This feature uses
                      settings that are only moderately tested and should be
                      considered "Beta" -- it is not recommended that it be
                      used except for testing. In order to activate the feature
                      for testing you must add the line "SP2_Support=1" to the
                      "[Options]" area of the REBUILDER.INI file.

                      - Added VTS_MIN_SIZE and VTSM_MIN_SIZE checks in the
                      REBUILD module. In previous versions changing this
                      value between PREPARE and REBUILD (which is something
                      that could only be done manually and should never be
                      done) could result in "Runtime Error 6".

                      - Added code to find default paths for CCE that will be
                      used if not overridden by those in the INI file.

                      - Changed the shell call for execution of encoders in
                      a minimized state to not receive focus.

                      - Improved the layer_break recognition routines to more
                      judiciously decide whether to change cell settings in
                      the IFO.

                      - Other minor and cosmetic changes.

                      Comment

                      • UncasMS
                        Super Moderator
                        • Nov 2001
                        • 9047

                        #26
                        Professional Edition 1.10.7

                        Professional Edition 1.10.7


                        September 12th, 2006 (v1.10.7)
                        CHANGES MADE TO PRO VERSION

                        - Corrected a conversion error in the SP2 beta code. This
                        could cause several possible problems during PREPARE or
                        ENCODE.

                        - Added a check that forces ConvertToYUY2() into AVS files
                        that are destined for use in ProCoder. In previous
                        versions deselecting this option could cause ProCoder to
                        stop functioning properly.

                        - Corrected functioning of the "<" and ">" buttons in the
                        new beta Viewer/Editor. In some countries' numeric formats
                        the "," decimal separator wasn't being properly interpreted.

                        - Corrected several minor slider positioning errors in the
                        beta Viewer/Editor.

                        - Corrected a ReJig sizing error.

                        - Corrected an error in the new beta SP2 support. The
                        maximum bitrate value was not being properly set. Note
                        that SP2 support continues to be considered "beta".

                        - Corrected a bug in the ECL generation for the beta CCE SP2
                        feature. Previous video for the PAL system when using
                        SP2 could result in blank sections at the end of each video
                        segment.

                        - Added settings to the SP2 ECL file that could prevent sizing
                        problems in the event that default values were incorrect.

                        - Corrected ECL updating routines in the Segement Editor/Viewer
                        for SP2 files.

                        - Other minor fixes/enhancements.

                        Comment

                        • UncasMS
                          Super Moderator
                          • Nov 2001
                          • 9047

                          #27
                          Professional Edition 1.10.8

                          Professional Edition 1.10.8

                          September 26th, 2006 (v1.10.8)
                          CHANGES MADE TO PRO VERSION

                          - Corrected an error in the beta Editor/Viewer in which the
                          updates made by "Allocate Saved Space to Feature" may not
                          be saved when exiting.. resulting in undersizing.

                          - Added code to reduce the likelihood that network layer
                          delays might cause timing errors.

                          - Fixed an issue in which blanking a segment might result
                          erroneous bitrate values.

                          - Corrected an bug in which a certain sequence of starting,
                          stopping, and resuming the ENCODE phase could skip one or
                          more segments and result in "Error in UpdateIFO" due to
                          missing M2V file(s).

                          - Corrected code so that space related to unreferenced cells
                          that have been removed is returned to video. This could
                          have caused undersizing when backup up certain dics.

                          - Added code to help alleviate "slow closing" that seems to
                          happen when using AutoQMatEnc on network drives and the
                          resulting "Cannot open ITEM.ECL" error.

                          - Corrected the display of "Est Size (total)" in the beta
                          segment editor/viewer. Previous versions failed to account
                          for NAVPACKs in this value. The "DVD Output Size" display
                          was not affected and remains correct.

                          - Other minor and cosmetic changes.

                          Comment

                          • blutach
                            Not a god of digital video
                            • Oct 2004
                            • 24627

                            #28
                            Freeware version 0.98

                            28th September 2006

                            Below is a summary of the changes/updates associated with this version. Note that this freeware version includes all bugfixes to date. Also note that the freeware version will not include the enhanced capabilities of the Pro Edition -- and future releases will be limited to minor changes and bug fixes only.

                            CHANGES MADE TO FREEWARE VERSION (since v0.97)

                            - Added a new "Write to Blank Disc (with ImgBurn)" option under the "Mode" menu. When selected this option will, at the end of DVD file creation, automatically burn to disc using the newest version of ImgBurn. Note -- the option is only enabled if you have ImgBurn v2.0.0.0 or greater installed on your computer. ImgBurn is highly recommended and can be downloaded at www.imgburn.com.

                            - Corrected an error in which "garbage" data following null or padding sectors could result in unpredictable timing and/or desynchronization.

                            - Added code to prevent a very rare cell transition timing anomaly that can occur when the source contains an irregularity.

                            - Added code to reduce the likelihood of "Error #0006" on streams that contain embedded MPEG garbage. Also, as investigation showed that these only happen in "orphaned" MPEG sections (following "null sectors" created by a decrypter) that are never actually decoded, the error has been removed and replaced by a warning in the STATUS window/log.

                            - Removed the "Special Error Processing" option. It no longer serves a purpose.

                            - Improved procedures for handling sequence_end_code and still frame processing. Fixed a bug in which an end code might be incorrectly inserted under certain rare circumstances.

                            - Corrected an error in which the INF first_sector and last_sector may (rarely on an oddly formatted source) be off by one sector.

                            - Fixed "Runtime Error 6" that can occur during rebuild when dealing with very small M2V files under specific conditions.

                            - Added routines to recognize and ignore extraneous files in the source directory -- including unreferenced VTSs that serve no purpose except to occupy space.

                            - Added a "hidden" setting, "DISABLE_UNREFERENCED_REMOVAL". This allows you to keep unreferenced cells and VTSs if for some reason it becomes necessary. By default DVD-RB removes any video/audio that, based upon the IFOs, is not actually used on the DVD.

                            - Fixed an error that could cause certain types of still pictures to not display.

                            - Added code for checking and adjusting for Pan & Scan mode. This should correct the problem on certain players where BOV video appears horizontally compressed and button placement appears off.

                            - Improved the layer_break recognition routines to better recognize and properly handle seamless branching titles.

                            - Improved the layer_break recognition routines to more judiciously decide whether to change cell settings in the IFO.

                            - Updated the installer to include QuEnc v0.71, HC Encoder v0.18, and ECLPRO v1.00 (RC1).

                            - Other minor and cosmetic changes.

                            Download it here.

                            Regards
                            Last edited by blutach; 29 Sep 2006, 07:16 AM.
                            Les

                            Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

                            Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
                            [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

                            Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

                            Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


                            You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

                            Explore the sites and the programs - there's a gold mine of information in them

                            Don't forget to play the Digital Digest Quiz!!! (Click here)

                            Comment

                            • UncasMS
                              Super Moderator
                              • Nov 2001
                              • 9047

                              #29
                              Professional Edition 1.10.9

                              Professional Edition 1.10.9


                              October 6th, 2006 (v1.10.9)
                              CHANGES MADE TO PRO VERSION

                              - Fixed a bug that could cause erroneous "Corrupt Stream
                              Detected" message to occur during REBUILD.

                              - Corrected an issue in which settings saved before a batch
                              process may not be restored correctly at batch end.

                              - Corrected an oddity in which unreferenced cells may not be
                              included in the sizing calculation -- resulting in output
                              undersizing.

                              - Fixed error in which bitrate values from use of the beta
                              Viewer/Editor are not being written correctly to the ECL
                              file when using CCE SP2.

                              - Modified the default bitrate for segments that contain less
                              than 60 frames. Discs with huge numbers of small segments
                              could cause some oversizing.

                              - Fixed a rare bug related to loading of Project files.

                              - Further improved ReJig sizing algorithm. This should
                              prevent undersizing that was previously observed.

                              - Adjusted code related to the processing of .ECL files.

                              - Improved sizing algorithm so that it can properly account
                              for some oddly formatted discs.

                              - Added code to more accurately predict sizing when working
                              in "Movie and Menus Only" mode.

                              - Updated the installer to include HC Encoder v0.19.

                              - Other minor and cosmetic changes.

                              Comment

                              • UncasMS
                                Super Moderator
                                • Nov 2001
                                • 9047

                                #30
                                Professional Edition 1.11.0

                                Professional Edition 1.11.0

                                CHANGES MADE TO PRO VERSION

                                - Several improvements in the authoring engine. This also
                                corrects a bug in which, under certain circumstances, it
                                was possible for the REBUILD phase to create runt VOBUs.

                                - Added code to support drag & drop capability for adding
                                files to the batch processor. Please note that only .RBD
                                files will be accepted for dropping.

                                - Added code to automatically recognize, adjust, and correct
                                for certain types of corrupt streams.

                                - Updated the CCE Path detection code to verify the collected
                                path names and look for variations.

                                - Added code to retry certain open statements when O/S calls
                                return before the operation is truly completed. This should
                                correct the occasional "Could not open ... file" errors that
                                seems happen when Kaspersky antivirus in in use on the host
                                system.

                                - Corrected a condition in which the VOBU_1stREF_EA NavPack
                                setting could be set incorrectly. Note: This could have
                                happened only under very unusual circumstances.

                                - Corrected a bug in which audio remapping may not correctly
                                work when used in conjunction with Movie_Only mode.

                                - Fixed "Runtime Error 35600" that can sometimes occur when
                                selecting "Show Extras Only" from the Viewer/Editor menu.

                                - Other minor and cosmetic changes.

                                Comment

                                Working...
                                😀
                                🥰
                                🤢
                                😎
                                😡
                                👍
                                👎