CD burning fails

[sadie1]

Hi, I'm new to this forum.
I've Toshiba m35x-s329 laptop with DVD/CD-RW. I bought it sometimes in Jan this year and still is under warranty period. From the begining, I had problem with my drive. I can listen music, watch movies on dvd w/o any problem but when it comes to cd burning, it gives trouble. Initially it wasn't burning data cds, it was giving errors like "source corrupted", "crc error", "file transfer error" etc but I was burning music & videos properly.
Now a days, it stopped doing that too. I am using Dynex, Memorex cds. I tried, Nero, Sonic & nothing works. It gives error like "failed to burn last track". I tried burning very small data, but it gives me the same error. I just downloaded latest Sonic DLA Packet Writing s/w, checked for DMA enability. The OS is XP Pro with SP-2.
Any help will be appreciated. Thanks in advance.

Sadie1

[LT. Columbo]

have you checked for a firmware update?

[sadie1]

I did not checked that. Actually, I don't know much @ that. When I had sent it to company, they returned my laptop saying that my drive is working fine and they had upgraded my laptop firmwares.

[LT. Columbo]

well maybe we should see if they did.

if you use nero, and open the historylog file, we can see if you can do a firmware update.

c/programfiles/ahead/nero/nerohistory.log

if you can cut and paste the section that looks like this, that will be enough
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1213S>Version: TS0D - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON LTR-52246S >Version: 6S02 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 2F040J0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1213S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 1 DMA: On

[sadie1]

What I did recently, I saw on some forum that nero InCD & Sonic can conflict, so I simply uninstalled nero. But when it failed again with Sonic, I tried to install nero again but it is unable to install & gives error like "unable to find nero.exe". I checked the primary & secondary IDE settings thru' device manager also & it is "use DMA if available".

[LT. Columbo]

i'd get rid of sonic, uninstall nero with the clean tool here

http://www.nero.com/eng/Clean_Tools.html

then re-install nero, log would help too.

also read this courtesy of cynthia

http://forum.digital-digest.com/showthread.php?s=&threadid=45942

[sadie1]

I'll try this while I'm at home in the evening and will paste the nero log file. Is there any possibility as has been told by my friend that the drive being faulty?

[LT. Columbo]

"Is there any possiblity as has been told by my friend that the drive being faulty?"

absolutely, and your lucky you have warranty, i'd wait to see what you find with the firmware before going that route though.

[sadie1]

Hi, I did as u had asked me to do and here is the error log. I hope, we can conclude something from the log file. Thanks a lot.

TOSHIBA

Nero Serial Removed

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 8:01:02 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <HL-DT-ST RW/DVD GCC-4243N>Version: 1.01 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST RW/DVD GCC-4243N>Version: 1.01 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4243N atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4243N F: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 478MB (489904kB)
Free physical memory: 118MB (121328kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.10.2005
CD-ROM (ISO)
9:03:10 PM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

9:03:10 PM #2 Text 0 File Burncd.cpp, Line 2948
HL-DT-ST RW/DVD GCC-4243N
Buffer underrun protection activated

9:03:10 PM #3 Text 0 File Reader.cpp, Line 127
Reader running

9:03:10 PM #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST RW/DVD GCC-4243N running

9:03:10 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

9:03:10 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media

9:03:10 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 340436 ( 75:41.11)

9:03:10 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

9:03:10 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST RW/DVD GCC-4243N;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

9:03:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:03:10 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 340437 (340437) = #340437/75:39.12
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 340435 blocks [HL-DT-ST RW/DVD GCC-4243N]
--------------------------------------------------------------

9:03:10 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST RW/DVD GCC-4243N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 697522176, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
340437 | lead-out | 1 | 0x41 | 0x00

9:03:10 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 340437 -> 340435.

9:03:11 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

9:03:11 PM #15 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

9:03:11 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

9:03:11 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 24x (3,600 KB/s)

9:03:11 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:03:11 PM #19 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON

9:07:48 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0AE60000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x04 0x14 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

9:07:48 PM #21 CDR -1135 File Writer.cpp, Line 311
Write error

9:07:48 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:07:48 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

9:07:48 PM #24 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
HL-DT-ST RW/DVD GCC-4243N\H1 T0

9:07:48 PM #25 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

9:07:48 PM #26 Text 0 File Mmc.cpp, Line 16352
<HL-DT-STRW/DVD GCC-4243N> start Close Session

9:07:48 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 24x (3,600 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/26/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[LT. Columbo]

DMA is off

"CdRomPeripheral : HL-DT-ST RW/DVD GCC-4243N atapi Port 1 ID 0 DMA: Off"

"9:07:48 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 24x (3,600 KB/s)"

http://forum.digital-digest.com/showthread.php?s=&threadid=44808

fix it and try again.

[sadie1]

I uninstalled the Primary IDE Channel and rebooted the comp but still the Current Transfer Mode for Device 1 is Not Applicable. How should I get reed of that. Do I need to do the same steps for Secondary IDE Chennel also?

[sadie1]

Here is another error log file after I enabled DMAs.
TOSHIBA

Nero Serial Removed

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 8:01:02 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <HL-DT-ST RW/DVD GCC-4243N>Version: 1.01 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST RW/DVD GCC-4243N>Version: 1.01 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4243N atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4243N F: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 478MB (489904kB)
Free physical memory: 58MB (59480kB)
Memory in use : 87 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.10.2005
CD-ROM (Boot)
12:27:26 AM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE

12:27:26 AM #2 Text 0 File Burncd.cpp, Line 2948
HL-DT-ST RW/DVD GCC-4243N
Buffer underrun protection activated

12:27:26 AM #3 Text 0 File Reader.cpp, Line 127
Reader running

12:27:26 AM #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST RW/DVD GCC-4243N running

12:27:26 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

12:27:26 AM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media

12:27:27 AM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 275133 ( 61:10.33)

12:27:27 AM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

12:27:27 AM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST RW/DVD GCC-4243N;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

12:27:27 AM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:27:27 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 275134 (275134) = #275134/61:8.34
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 275132 blocks [HL-DT-ST RW/DVD GCC-4243N]
--------------------------------------------------------------

12:27:27 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST RW/DVD GCC-4243N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 563781632, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
275134 | lead-out | 1 | 0x41 | 0x00

12:27:27 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 275134 -> 275132.

12:27:27 AM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

12:27:27 AM #15 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

12:27:27 AM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

12:27:27 AM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 24x (3,600 KB/s)

12:27:27 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:27:27 AM #19 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON

12:31:17 AM #20 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0AEB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x04 0x13 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

12:31:17 AM #21 CDR -1135 File Writer.cpp, Line 311
Write error

12:31:17 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:31:17 AM #23 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
HL-DT-ST RW/DVD GCC-4243N\H1 T0

12:31:17 AM #24 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

12:31:17 AM #25 Text 0 File Mmc.cpp, Line 16352
<HL-DT-STRW/DVD GCC-4243N> start Close Session

12:31:17 AM #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 24x (3,600 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/26/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[LT. Columbo]

"still the Current Transfer Mode for Device 1 is Not Applicable. "

thats ok, just means nothing connected to it. your dma is ok now. try another burn at 8x.

also you can update the firmware

http://forum.rpc1.org/dl_result.php?kaj=1&isces

[sadie1]

I tried burning with 10x and then 4x and here is the error log. I don't know which firmware to choose. There are so many.

TOSHIBA

Nero Serial Removed

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 8:01:02 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <HL-DT-ST RW/DVD GCC-4243N>Version: 1.01 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST RW/DVD GCC-4243N>Version: 1.01 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4243N atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4243N F: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 478MB (489904kB)
Free physical memory: 83MB (85260kB)
Memory in use : 82 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.10.2005
CD-ROM (Boot)
12:04:37 PM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE

12:04:37 PM #2 Text 0 File Burncd.cpp, Line 2948
HL-DT-ST RW/DVD GCC-4243N
Buffer underrun protection activated

12:04:37 PM #3 Text 0 File Reader.cpp, Line 127
Reader running

12:04:37 PM #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST RW/DVD GCC-4243N running

12:04:37 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

12:04:37 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media

12:04:37 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 275133 ( 61:10.33)

12:04:37 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

12:04:37 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST RW/DVD GCC-4243N;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

12:04:37 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:04:38 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 275134 (275134) = #275134/61:8.34
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 275132 blocks [HL-DT-ST RW/DVD GCC-4243N]
--------------------------------------------------------------

12:04:38 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST RW/DVD GCC-4243N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 563781632, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
275134 | lead-out | 1 | 0x41 | 0x00

12:04:38 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 275134 -> 275132.

12:04:38 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

12:04:38 PM #15 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

12:04:38 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

12:04:38 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 KB/s)

12:04:38 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:04:38 PM #19 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON

12:19:39 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0ADB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x04 0x12 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

12:19:39 PM #21 CDR -1135 File Writer.cpp, Line 311
Write error

12:19:39 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:19:39 PM #23 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
HL-DT-ST RW/DVD GCC-4243N\H1 T0

12:19:39 PM #24 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack

12:19:39 PM #25 Text 0 File Mmc.cpp, Line 16352
<HL-DT-STRW/DVD GCC-4243N> start Close Session

12:19:39 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (600 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/26/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[LT. Columbo]

http://forum.rpc1.org/dl_firmware.php?download_id=1952