Nero burning error

usinpa

Junior Member

Join Date: Oct 2005

Posts: 1
Share

Tweet
#1

Nero burning error

28 Oct 2005, 10:03 AM

Hi when i burn data dvd to dvd+r i get burn failed but when i burn same data dvd to dvd+rw all goes fine. Any help would be great. Here is the log.

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <DVDRW IDE1008>Version: 0159 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE>HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <DVDRW IDE1008>Version: 0159 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE>HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B120P0 atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TDK DVDRW880N atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVDRW IDE1008 E: CDRom0
TDK DVDRW880N F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 136MB (139428kB)
Memory in use : 82 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.10.2005
ISO compilation
5:47:27 PM #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

5:47:27 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

5:47:27 PM #3 Text 0 File Reader.cpp, Line 124
Reader running

5:47:27 PM #4 Text 0 File Writer.cpp, Line 113
Writer E: DVDRW IDE1008 running

5:47:27 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

5:47:28 PM #6 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

5:47:28 PM #7 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2209871 (491:04.71, 4316MB)

5:47:28 PM #8 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO

5:47:28 PM #9 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: DVDRW IDE1008, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

5:47:28 PM #10 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:47:28 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2209872 (2209872) = #2209872/491:4.72
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2209872 blocks [E: DVDRW IDE1008]
--------------------------------------------------------------

5:47:28 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: DVDRW IDE1008] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4525817856, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2209872 | lead-out | 1 | 0x41 | 0x00

5:47:28 PM #13 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

5:47:28 PM #14 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

5:47:29 PM #15 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

5:47:29 PM #16 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

5:47:29 PM #17 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 8x (11,080 KB/s)

5:47:29 PM #18 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x0614e000: Len x4000

5:47:29 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:47:29 PM #20 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <NOT specified>(F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: E01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

5:47:29 PM #21 Text 0 File DVDR.cpp, Line 5876
Drive: DVDRW IDE1008
Book Type request [BTC]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

5:47:29 PM #22 CDR -1207 File DVDR.cpp, Line 5211
Book Type automatically set to: DVD-ROM

5:47:29 PM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

6:00:15 PM #24 WINPFILE 5 File winpfile.cpp, Line 272
Access is denied.
C:\Documents and Settings\Bill.n.Sue\Desktop\No Install Needed\pacman\pacman.exe

6:01:43 PM #25 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 1D ED 40 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x04ba0000: Len x10000
0x67 B8 35 A3 A4 94 11 58 A2 DE 63 59 A9 5A FB 4A
0xA8 D7 52 AD 71 6D 51 A7 07 53 7B D8 41 23 A0 82
0x63 74 68 D5 4F 14 A5 E0 CF 4A 2C A8 72 D6 A2 FB

6:01:43 PM #26 CDR -1135 File Writer.cpp, Line 302
Write error
E: DVDRW IDE1008

6:01:43 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

6:01:47 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

6:02:29 PM #29 Text 0 File DVDR.cpp, Line 5876
Drive: DVDRW IDE1008
Book Type request [BTC]: DVD+R
Changing the Book Type was finished successfully, return code 0

6:02:29 PM #30 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 7/13/2005 2:25:16 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Tags: None
blutach

Not a god of digital video

Join Date: Oct 2004

Posts: 24627
Share

Tweet
#2

28 Oct 2005, 10:27 AM

Please read the Golden Rules of Burning in my signature and follow the sugestions there. I particular, buy better media than CMC (junk) like Verbatim or Taiyo Yuden and slow the burn down to 4x maximum, maybe 2x even.

You could probably do with a firmware update too - http://forum.rpc1.org/dl_firmware.php?download_id=1727

I've also seen a few "teething" problems with Nero 7. You might like to reconsider using Nero 6 for a while.

Regards

Last edited by blutach; 28 Oct 2005, 10:42 AM.

Les

Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
[What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]

You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

Explore the sites and the programs - there's a gold mine of information in them

Don't forget to play the Digital Digest Quiz!!! (Click here)
Comment
Chewy

Super Moderator

Join Date: Nov 2003

Posts: 18971
Share

Tweet
#3

28 Oct 2005, 10:40 AM

"Access is denied.
C:\Documents and Settings\Bill.n.Sue\Desktop\No Install Needed\pacman\pacman.exe"
oh yes!

I missed this;
DiskPeripheral : Maxtor 6B120P0 atapi Port 0 ID 1 DMA: Off

Last edited by Chewy; 28 Oct 2005, 10:42 AM.
Comment

Previous template Next

Announcement

Nero burning error

Comment

Comment