Showing results 1 to 14 of 14

Thread: Nero Burning failed

  1. #1
    Junior Member
    Junior Member

    Join Date
    Nov 2005
    Posts
    5

    Default Nero Burning failed

    Untill recently Nero rarely failed burning the DVD. I've been reading a lot of posts on this website and they have been really helpful. (especially enabling DMA)
    I dont know how to read the Nero error log and actually find out why it failed.
    The media im using is in the 2nd category according to the link on the "Golden Rules".
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
    Nero API version: 6.3.0.3
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <HL-DT-ST DVD-RW GWA-4040N>Version: 1.02 - HA 2 TA 0 - 6.3.0.3
    Adapter driver: <atapi> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : TOSHIBA MK6026GAX atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-RW GWA-4040N atapi Port 2 ID 0 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 3 ID 0 DMA: Off
    CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 3 ID 1 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-RW GWA-4040 D: CDRom3
    Generic DVD-ROM F: CDRom1
    Generic DVD-ROM G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 1023MB (1048048kB)
    Free physical memory: 347MB (355828kB)
    Memory in use : 66 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.11.2005
    NeroAPI
    12:21:36 AM #1 Phase 112 File APIProgress.cpp, Line 253
    DVD-Video files reallocation started

    12:21:36 AM #2 Phase 114 File APIProgress.cpp, Line 253
    DVD-Video files reallocation completed (no file modified)

    12:21:36 AM #3 Phase 111 File APIProgress.cpp, Line 253
    DVD-Video files sorted

    12:21:36 AM #4 Text 0 File Reader.cpp, Line 118
    Reader running

    12:21:36 AM #5 Text 0 File Writer.cpp, Line 124
    Writer HL-DT-ST DVD-RW GWA-4040N running

    12:21:36 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3882
    First writeable address = 0 (0x00000000)

    12:21:36 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
    First writeable address = 0 (0x00000000)

    12:21:36 AM #8 Text 0 File Burncd.cpp, Line 3101
    Turn on Disc-At-Once, using DVD media

    12:39:03 AM #9 Text 0 File DlgWaitCD.cpp, Line 240
    Last possible write address on media: 2297887 (510:38.37, 4488MB)
    Last address to be written: 2286108 (508:01.33, 4465MB)

    12:39:03 AM #10 Text 0 File DlgWaitCD.cpp, Line 245
    Write in overburning mode: FALSE

    12:39:03 AM #11 Text 0 File DlgWaitCD.cpp, Line 2085
    Recorder: HL-DT-ST DVD-RW GWA-4040N, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    12:39:03 AM #12 Text 0 File DlgWaitCD.cpp, Line 406
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

    12:39:03 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 779
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286109 (2286109) = #2286109/508:1.34
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286109 blocks [HL-DT-ST DVD-RW GWA-4040N]
    --------------------------------------------------------------

    12:39:03 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 948
    Prepare recorder [HL-DT-ST DVD-RW GWA-4040N] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681951232, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286109 | lead-out | 1 | 0x00 | 0x41

    12:39:03 AM #15 Phase 24 File APIProgress.cpp, Line 253
    Caching of files started

    12:39:03 AM #16 Text 0 File Burncd.cpp, Line 4073
    Cache writing successful.

    12:39:03 AM #17 Phase 25 File APIProgress.cpp, Line 253
    Caching of files completed

    12:39:03 AM #18 Phase 36 File APIProgress.cpp, Line 253
    Burn process started at 2x (2,770 KB/s)

    12:39:03 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2264
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:39:03 AM #20 Text 0 File DVDR.cpp, Line 1512
    Recording mode: Sequential Recording Mode

    12:39:03 AM #21 Text 0 File Mmc.cpp, Line 19487
    Set BUFE: supported -> ON

    12:39:03 AM #22 Text 0 File DVDR.cpp, Line 1643
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:39:03 AM #23 Text 0 File Cdrdrv.cpp, Line 7941
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Media Specific:
    30 01 02 04 06 00 00 00 - 08 00 00 00 00 00 00 00 0...............
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    1:06:34 AM #24 Text 0 File WriterStatus.cpp, Line 115
    <HL-DT-ST DVD-RW GWA-4040N> start writing Lead-Out at LBA 2286109 (22E21Dh), lenght 0 blocks

    1:06:34 AM #25 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    1:06:34 AM #26 Text 0 File DVDR.cpp, Line 1847
    EndDAO: Last written address was 2286111

    1:07:28 AM #27 SCSI -1119 File Cdrdrv.cpp, Line 1171
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x09
    Sense Qual: 0x03
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x09 0x03

    1:07:28 AM #28 CDR -1119 File ThreadedTransferInterface.cpp, Line 1659
    Track following error

    1:07:28 AM #29 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1659
    Could not perform end of Disc-at-once

    1:07:28 AM #30 Text 0 File DVDR.cpp, Line 1847
    EndDAO: Last written address was -1

    1:07:28 AM #31 Phase 38 File APIProgress.cpp, Line 253
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 1/27/2005 12:04:40 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
    Last edited by Civilian; 3 Nov 2005 at 11:14 AM

  2. #2
    Not a god of digital video blutach's Avatar
    Join Date
    Oct 2004
    Location
    is everything!
    Posts
    24,627

    Default



    Lotsa things here - easiest if you read the golden rules of burning in my signature and implement the recommendations, esp updating Nero and changing those disks - the Ritek G05s were known to be poor.

    However, you appear to have a hardware error (Code **040903) - your drive might be on the way out. Maybe clean it. Also, check the IDE cables.

    Regards

  3. #3

  4. #4
    Junior Member
    Junior Member

    Join Date
    Nov 2005
    Posts
    5

    Default

    I'm not sure if my drive would be able to accept that firmware because it says Dell OEM Drives only. Fujitsu-Siemens OEM drives only
    But that may not be an issue at all.
    Will this firmare upgrade work for my drive?

    I saw that my Dvd brand was in the second best in your signature list didn't know that my specific model one was bad.
    I will install the updates for Nero.

    Thanks alot for the help.

  5. #5
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    If you are going to get that media to work right, firmware is a must!
    But I would definitely consider knowing the brand of laptop!
    HP?

  6. #6
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    Arima??????????? emachine??

    LG HL-DT-ST GWA-4040N (GCA-4040N)
    RPC1 Firmwares based on B107 (DELL) Windows, 1.19 (HP) Windows, and 1.02 (ARIMA) Windows.

  7. #7

  8. #8
    Junior Member
    Junior Member

    Join Date
    Nov 2005
    Posts
    5

    Default

    My laptop is somewhat custom. I think the model is cl-56 im in no way sure about this. i got my laptop from powernotebooks.com
    I dont know what u need to know about it unfortunately.
    I could give you the specs but i dont think i would provide what u need to know. I purhcased it about a year back and i wasn't able to find my model on their website.
    Obviously i dont want to ruine my drive so im intimidated to update the firmware.

  9. #9
    Not a god of digital video blutach's Avatar
    Join Date
    Oct 2004
    Location
    is everything!
    Posts
    24,627

    Default

    It's pretty hard to screw up a firmware. If it's no good, on most occasions, you can go back to the last one you had.

    If you want to be in the DVD burning biz, it's a must to have up to date firmware.

    Regards

  10. #10
    Junior Member
    Junior Member

    Join Date
    Nov 2005
    Posts
    5

    Default

    Noob Question of the day...
    are you ready for it?
    How do i flash it when I dont have a floppy drive?
    Feel free to point and laugh

  11. #11
    Not a god of digital video blutach's Avatar
    Join Date
    Oct 2004
    Location
    is everything!
    Posts
    24,627

    Default

    If it's an exe, just do it from windows. Drop the new firmware onto the desktop and run it.

    Please, no disk in drive. Afterwards, reboot.

    Regards

  12. #12
    Junior Member
    Junior Member

    Join Date
    Nov 2005
    Posts
    5

    Default

    C:\Documents.......\GCAFSCDN.EXE
    C:\WINDOWS\SYSTEM32\AUTOEXEC.NT. The sytem file is not suitable for running MS-DOS and Microsoft WIndows applications. Choose 'Close' to terminate the application.
    "Close" "Ignore"

    Any help would be appreciated.

  13. #13
    Not a god of digital video blutach's Avatar
    Join Date
    Oct 2004
    Location
    is everything!
    Posts
    24,627

    Default

    Yer right - I've just read the readme. You may need to pop the file onto a CDROM and see if you can boot that way. You may need to change the BIOS boot settings.

    Regards

  14. #14
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    Quote Originally Posted by blutach
    He's got the 1.02 - I'd tend to go for the 1.04 on the basis of it being in the same series.

    Regards
    Fujitsu-Siemens OEM drives, ah missed that, would have been nice to confirm,
    LG had NOTHING on their website, if he has a floppy drive make a startup disk
    with it and set to boot to it.

    looks hairy?
    "copy files to floppy
    - boot in DOS-mode
    - launch GCAFSCDN.EXE "

    well from what I read the drive didn't win any awards!
    If it don't work then there's always the older media supported
    by 1.02.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •