Page 1 of 3 123 LastLast
Showing results 1 to 15 of 32

Thread: to know this would have helped along time ago

  1. #1
    Junior Member
    Junior Member

    Join Date
    Aug 2005
    Posts
    44

    Default to know this would have helped along time ago

    Just FYI,

    I had a hard time finding the right type of DVD recordable media to use with my SONY burner and DVD shrink. ten bad burns later i narrowed it down to the flawless media. Today I uncovered a gold nugget of information. The website for SONY has a techsupport for my model of burner that has SONYs' recommended media. Not so coincidentially ( I think I spelled that right) all the bad media for me is not listed here and the two good ones' I found are!!

    I wish id found this about 100$ ago

  2. #2
    Demigod of Digital Video
    LT. Columbo's Avatar
    Join Date
    Nov 2004
    Location
    Los Angeles, CA
    Posts
    10,671

    Default

    it's all part of the experience, hopefully this thread will thwart other newcommers from the same fate

    glad you're having success
    "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
    Columbo moments...
    "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
    "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
    (An Exercise In Fatality, 1974)



  3. #3
    Lord of Digital Video
    Lord of Digital Video
    tigerman8u's Avatar
    Join Date
    Aug 2003
    Posts
    2,123

    Default

    a good place to start for media compatibility for burners and players is www.videohelp.com

  4. #4
    An Eagles Fan, A MenuShrinker jm1647's Avatar
    Join Date
    Apr 2005
    Location
    New Jersey
    Posts
    3,661

    Default

    @pcj197493 - Depending upon what model Sony Burner you have there are tools to extract the supported media codes from the burner fw. What model do you have?

  5. #5
    Junior Member
    Junior Member

    Join Date
    Aug 2005
    Posts
    25

    Default

    well after my 100 pack of memorex are a big waste, I found some that work perfect for my lite on burner, what I don't understand is that my first 15 burns with my memorex DVD-R's there were no flaws and now every single on of them are burning 10 % and wasted........if anyone can explain this to me please do so.


    so simular and I will see if my lite on has a tech support

  6. #6
    Demigod of Digital Video
    LT. Columbo's Avatar
    Join Date
    Nov 2004
    Location
    Los Angeles, CA
    Posts
    10,671

    Default

    i wouldn't waste your time with lite-on tech support. seriously, you'll fare better in forums like these. i have a lite-on sohw1213s, it likes the memorex and sony 08d1 ID dvd-r's. which model do you have? and is the firmware up to date?

    also, having some good and some bad discs in a batch or spindle isn't unheard of with some media.
    "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
    Columbo moments...
    "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
    "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
    (An Exercise In Fatality, 1974)



  7. #7
    An Eagles Fan, A MenuShrinker jm1647's Avatar
    Join Date
    Apr 2005
    Location
    New Jersey
    Posts
    3,661

    Default

    Quote Originally Posted by idiotbox12
    well after my 100 pack of memorex are a big waste, I found some that work perfect for my lite on burner, what I don't understand is that my first 15 burns with my memorex DVD-R's there were no flaws and now every single on of them are burning 10 % and wasted........if anyone can explain this to me please do so.


    so simular and I will see if my lite on has a tech support
    @idiotbox - what liteon burner do you have? Can you post a log from the burning program you use to give us more info. Some LiteOn models have newer and up more to date firmware from Liteon. Some like LT's have not had a fw update for over a year from LiteOn. Then of course there are the Codeguys and their Omnipatcher and modified fw's, and MediaCodeSpeedEdit by ala42 to help get better burns.

  8. #8
    Junior Member
    Junior Member

    Join Date
    Aug 2005
    Posts
    25

    Default

    this is my most recent one a successful burn with a ESA DVD=RW i beleieve




    3.11.2005
    Burn DVD Image
    7:26:19 PM #1 Text 0 File Reader.cpp, Line 127
    Reader running

    7:26:19 PM #2 Text 0 File Writer.cpp, Line 122
    Writer LITE-ON DVDRW SOHW-1633S running

    7:26:19 PM #3 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    7:26:19 PM #4 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2286018 (508:00.18, 4464MB)

    7:26:19 PM #5 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    7:26:19 PM #6 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
    Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 3

    7:26:19 PM #7 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:26:19 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286019 (2286019) = #2286019/508:0.19
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286019 blocks [LITE-ON DVDRW SOHW-1633S]
    --------------------------------------------------------------

    7:26:19 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681766912, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286019 | lead-out | 1 | 0x41 | 0x00

    7:26:19 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    7:26:19 PM #11 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    7:26:19 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    7:26:19 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    7:26:19 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    7:26:19 PM #15 Text 0 File Cdrdrv.cpp, Line 8862
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: CMC.MAG.
    Media type ID: E01
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
    23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    7:26:19 PM #16 Text 0 File DVDPlusRW.cpp, Line 665
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:09:14 PM #17 Text 0 File WriterStatus.cpp, Line 116
    <LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2286019 (22E1C3h), lenght 0 blocks

    8:09:14 PM #18 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    8:09:42 PM #19 Phase 37 File dlgbrnst.cpp, Line 1832
    Burn process completed successfully at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 10/24/2004 10:07:38 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======

  9. #9
    Junior Member
    Junior Member

    Join Date
    Aug 2005
    Posts
    25

    Default

    in response to columbo I have model SOHW 1633s with firmware upgrade BS0S

  10. #10
    An Eagles Fan, A MenuShrinker jm1647's Avatar
    Join Date
    Apr 2005
    Location
    New Jersey
    Posts
    3,661

    Default

    @idiotbox12 - I have the same burner and fw and had success with the CMC MAGE01 media. You chopped off the beginning of the Nero log that has important info in it. Can you post the entire part of the log for that burn?

  11. #11
    Junior Member
    Junior Member

    Join Date
    Aug 2005
    Posts
    25

    Default

    sorry about that here you go


    Nero-Burning Rom, History File *** ======
    Adrian

    Nero Serial Removed*

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b
    (Nero Express)
    Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 1 - 6.6.0.16
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SAMSUNG DVD-ROM SD-616E >Version: F501 - HA 1 TA 0 - 6.6.0.16
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG DVD-ROM SD-616E atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    SAMSUNG DVD-ROM SD-616E D: CDRom0
    LITE-ON DVDRW SOHW-1633S E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 509MB (522224kB)
    Free physical memory: 168MB (172764kB)
    Memory in use : 66
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.11.2005
    Burn DVD Image
    7:26:19 PM #1 Text 0 File Reader.cpp, Line 127
    Reader running

    7:26:19 PM #2 Text 0 File Writer.cpp, Line 122
    Writer LITE-ON DVDRW SOHW-1633S running

    7:26:19 PM #3 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    7:26:19 PM #4 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2286018 (508:00.18, 4464MB)

    7:26:19 PM #5 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    7:26:19 PM #6 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
    Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 3

    7:26:19 PM #7 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:26:19 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286019 (2286019) = #2286019/508:0.19
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286019 blocks [LITE-ON DVDRW SOHW-1633S]
    --------------------------------------------------------------

    7:26:19 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681766912, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286019 | lead-out | 1 | 0x41 | 0x00

    7:26:19 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    7:26:19 PM #11 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    7:26:19 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    7:26:19 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    7:26:19 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    7:26:19 PM #15 Text 0 File Cdrdrv.cpp, Line 8862
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: CMC.MAG.
    Media type ID: E01
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
    23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    7:26:19 PM #16 Text 0 File DVDPlusRW.cpp, Line 665
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:09:14 PM #17 Text 0 File WriterStatus.cpp, Line 116
    <LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2286019 (22E1C3h), lenght 0 blocks

    8:09:14 PM #18 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    8:09:42 PM #19 Phase 37 File dlgbrnst.cpp, Line 1832
    Burn process completed successfully at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 10/24/2004 10:07:38 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======

  12. #12
    An Eagles Fan, A MenuShrinker jm1647's Avatar
    Join Date
    Apr 2005
    Location
    New Jersey
    Posts
    3,661

    Default

    @idiotbox12 - For starters your DMA is off see here

    Also you might want to do a ForceAspi see here

    I have the same burner with the same fw and have no problems.

  13. #13
    Junior Member
    Junior Member

    Join Date
    Aug 2005
    Posts
    25

    Default

    thanks I am going to try that forceaspi thing now, and believe you me I know about my DMA mode I have tried everything in the world and nothing works it is stuck on PIO mode I dunno why I gave up on that.

  14. #14
    An Eagles Fan, A MenuShrinker jm1647's Avatar
    Join Date
    Apr 2005
    Location
    New Jersey
    Posts
    3,661

    Default

    Did you delete the Secondary IDE channel and reboot and it still came back up as PIO mode? Do you have XP SP2 installed?

  15. #15
    An Eagles Fan, A MenuShrinker jm1647's Avatar
    Join Date
    Apr 2005
    Location
    New Jersey
    Posts
    3,661

    Default

    See this article also about DMA reverting back to PIO mode.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •