Nero burn problem. please help

**Chewy** · 14 Nov 2005, 05:42 PM

No hassle, be sure and reboot computer between steps. Put off using force aspi until later(if at all).

**RavenX** · 14 Nov 2005, 06:09 PM

ok, this is what I have done.

ran kill aspi > rebooted
ran nero clean tool > rebooted
manually deleted any files/folders left in D:\Program Files\Ahead > rebooted
Installed nero > rebooted
Installed nero update (6.6.0.18) > rebooted

tried to burn dvd and got same reset error.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <MAD DOG MD-16XDVD9A4> Version: 1.F1 - HA 3 TA 0 - 6.6.0.18
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SD-M1302>Version: 1006 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TDK CDRW121032 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1302 atapi Port 1 ID 1 DMA: On
DiskPeripheral : WDC WD2000JD-00GBB0 02.0 viamraid Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TDK CDRW121032 E: CDRom0
TOSHIBA DVD-ROM SD-M1302 F: CDRom1
MAD DOG MD-16XDVD9A4 G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 629MB (644252kB)
Memory in use : 38 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.11.2005
UDF/ISO compilation
2:04:04 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

2:04:04 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

2:04:04 AM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

2:04:04 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

2:04:04 AM #5 Text 0 File Reader.cpp, Line 127
Reader running

2:04:04 AM #6 Text 0 File Writer.cpp, Line 122
Writer MAD DOG MD-16XDVD9A4 running

2:04:05 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

2:04:05 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

2:04:05 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

2:04:05 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

2:04:05 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

2:04:05 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: MAD DOG MD-16XDVD9A4, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193

2:04:05 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:04:05 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [MAD DOG MD-16XDVD9A4]
--------------------------------------------------------------

2:04:05 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [MAD DOG MD-16XDVD9A4] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00

2:04:05 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

2:04:05 AM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

2:04:05 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

2:04:05 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

2:04:05 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:04:05 AM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode

2:04:05 AM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON

2:04:05 AM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes

2:04:05 AM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

2:04:08 AM #25 Text 0 File Cdrdrv.cpp, Line 1288
02:04:08.765 - MAD DOG MD-16XDVD9A4\H3 T0 : Queue again later

2:04:09 AM #26 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x06CF0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

2:04:09 AM #27 SCSI -1114 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x07451400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

2:04:09 AM #28 CDR -1114 File Writer.cpp, Line 311
Reset occurred

2:04:09 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

2:04:10 AM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

2:04:10 AM #31 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1

2:04:10 AM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 9/14/2005 11:17:44 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:42 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**Chewy** · 14 Nov 2005, 06:30 PM

"File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:42 PM (Adapter driver for src)"

should read like mine!
"File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)"

please read this thread!

using nero 7 and taiyo yuden media but getting illegal disc error - Digital Video Forums

http://forum.digital-digest.com/showthread.php?t=55959&highlight=PXHELP20.SYS%27

Talk about blank DVD media, burning and hardware related problems

"File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 9/14/2005 11:17:44 AM (Prassi/Veritas driver for win 2K)"

**RavenX** · 15 Nov 2005, 04:09 AM

Thanks for the link. I have read through that topic but did not find anything posted on how to change the "Adapter driver for src to rec however, I did see that I had the pxhelp20.sys file under the drivers, so I went ahead and used "roxizap" and renamed the file. I went ahead and tried to burn again but I am still getting the reset error. I think you might be right about the driver for src and rec, but not sure how to set it to rec.

My log again.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <MAD DOG MD-16XDVD9A4> Version: 1.F1 - HA 3 TA 0 - 6.6.0.18
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SD-M1302>Version: 1006 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TDK CDRW121032 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1302 atapi Port 1 ID 1 DMA: On
DiskPeripheral : WDC WD2000JD-00GBB0 02.0 viamraid Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TDK CDRW121032 E: CDRom0
TOSHIBA DVD-ROM SD-M1302 F: CDRom1
MAD DOG MD-16XDVD9A4 G: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 606MB (621524kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.11.2005
UDF/ISO compilation
12:04:07 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

12:04:07 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

12:04:07 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

12:04:07 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

12:04:07 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

12:04:07 PM #6 Text 0 File Writer.cpp, Line 122
Writer MAD DOG MD-16XDVD9A4 running

12:04:07 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

12:04:07 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

12:04:07 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

12:04:08 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

12:04:08 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

12:04:08 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: MAD DOG MD-16XDVD9A4, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193

12:04:08 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:04:08 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [MAD DOG MD-16XDVD9A4]
--------------------------------------------------------------

12:04:08 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [MAD DOG MD-16XDVD9A4] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00

12:04:08 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

12:04:08 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

12:04:08 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

12:04:08 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

12:04:08 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:04:08 PM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode

12:04:08 PM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON

12:04:08 PM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes

12:04:08 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:04:08 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
12:04:08.828 - MAD DOG MD-16XDVD9A4\H3 T0 : Queue again later

12:04:09 PM #26 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0BCD0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

12:04:09 PM #27 SCSI -1114 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0C381400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

12:04:09 PM #28 CDR -1114 File Writer.cpp, Line 311
Reset occurred

12:04:09 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:04:09 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

12:04:09 PM #31 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1

12:04:09 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:42 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**Chewy** · 15 Nov 2005, 05:01 AM

I am about out of options for software fixes, I hate to suggest running
anything else, maybe some more experienced fellows will pitch in,
do all other usb devices work on the computer, have you tried other
ports?
It might be worthwhile to take your burner to a friends and try it on another computer.

**RavenX** · 15 Nov 2005, 06:04 AM

ok what I don't get is, I just tried to burn the movie again with a different disk. its a Sony dvd+rw 4x. I'm burning the files to the dvd with no problem. I don't understand why a dvd+rw would work and not a dvd-r.

**NightTran** · 15 Nov 2005, 09:35 AM

try dvdd to burn

**RavenX** · 15 Nov 2005, 09:39 AM

thanks for the reply. I will try dvdd to burn and will report back.

**NightTran** · 15 Nov 2005, 10:02 AM

good luck

**RavenX** · 15 Nov 2005, 04:13 PM

I have not tried dvdd yet. I went back and tried one more thing with Nero 6. I read somewhere on the internet that dissabling "DVD High compatibility mode (at least 1GB will be written)" option might help with some problems. I went ahead and unchecked the box and burned two movies at 4x and they worked. Does anyone know by dissabling the "DVD high compatability mode, if it will affect the picture quality of the movie? Not sure what dvd high compatibility does. Anyone know? Thanks. Also here is the log file for the successful burn.

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <MAD DOG MD-16XDVD9A4> Version: 1.F1 - HA 3 TA 0 - 6.6.0.18
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SD-M1302>Version: 1006 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TDK CDRW121032 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1302 atapi Port 1 ID 1 DMA: On
DiskPeripheral : WDC WD2000JD-00GBB0 02.0 viamraid Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TDK CDRW121032 E: CDRom0
TOSHIBA DVD-ROM SD-M1302 F: CDRom1
MAD DOG MD-16XDVD9A4 G: CDRom9
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 501MB (513156kB)
Memory in use : 51
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.11.2005
UDF/ISO compilation
11:46:17 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

11:46:17 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

11:46:17 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

11:46:17 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

11:46:17 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

11:46:17 PM #6 Text 0 File Writer.cpp, Line 122
Writer MAD DOG MD-16XDVD9A4 running

11:46:17 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:46:17 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:46:17 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

11:46:18 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286143 (508:01.68, 4465MB)

11:46:18 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

11:46:18 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: MAD DOG MD-16XDVD9A4, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193

11:46:18 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:46:18 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [MAD DOG MD-16XDVD9A4]
--------------------------------------------------------------

11:46:18 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [MAD DOG MD-16XDVD9A4] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286144 | lead-out | 1 | 0x41 | 0x00

11:46:18 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11:46:18 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

11:46:18 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11:46:18 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

11:46:18 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:46:18 PM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode for Multisession

11:46:18 PM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON

11:46:18 PM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: No

11:46:18 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:00:16 AM #25 Text 0 File WriterStatus.cpp, Line 116
<MAD DOG MD-16XDVD9A4 > start writing Lead-Out at LBA 2286144 (22E240h), lenght 0 blocks

12:00:17 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:00:17 AM #27 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 2286143

12:00:21 AM #28 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out

12:01:02 AM #29 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**Chewy** · 16 Nov 2005, 01:37 AM

must have something to do with the external drive, mine(internal) is always been set for high compatibilty mode.

**RavenX** · 16 Nov 2005, 06:57 AM

hmm, well Im gonna keep it turned off, works great. Also thanks to everyone who contributed in helping me.

**Chewy** · 16 Nov 2005, 07:13 AM

RavenX,
I nominate you for trooper of the year award, it's a pleasure to "try"
to help someone like you, and learn a little in the meantime.

**RavenX** · 16 Nov 2005, 03:22 PM

hehe

!

Nero burn problem. please help

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment