Showing results 1 to 8 of 8

Thread: Help with benq dvd 1640 w drive

  1. #1
    Junior Member
    Junior Member

    Join Date
    Nov 2005
    Posts
    3

    Default Help with benq dvd 1640 w drive

    I recently had a new computer built, and I try to burn dvd's using the new drive I have. It is a benq 1640 w dvd drive. The last drive I had was a NEC ND3540A. I have problems with the burning speed with the new drive. I get 2.4x and maximum where with the NEC I was up to almost the full 16x speed. I have tried with both Nero 6 and 7. I am not sure what is different, and if anyone has any ideas, they would be appreciated. I use dvd shrink
    thanks

  2. #2
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    post a nero 6 log
    just the last 2.4x burn(at the bottom) remove serial number
    nerohistory.log in the ahead/nero folder

  3. #3
    Junior Member
    Junior Member

    Join Date
    Nov 2005
    Posts
    3

    Default

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
    Nero API version: 6.6.0.12
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Internal Version: 6, 6, 0, 12c

    Recorder: <BENQ DVD DD DW1640> Version: BSLB - HA 0 TA 0 - 6.6.0.12
    Adapter driver: <atapi> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    CdRomPeripheral : BENQ DVD DD DW1640 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : SAMSUNG HD160JJ atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    BENQ DVD DD DW1640 E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 958MB (981476kB)
    Free physical memory: 568MB (582408kB)
    Memory in use : 40 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.11.2005
    NeroAPI
    4:53:08 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    4:53:08 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    4:53:08 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    4:53:08 PM #4 Text 0 File Reader.cpp, Line 127
    Reader running

    4:53:08 PM #5 Text 0 File Writer.cpp, Line 122
    Writer BENQ DVD DD DW1640 running

    4:53:08 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    4:53:08 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    4:53:08 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    4:53:08 PM #9 Text 0 File Burncd.cpp, Line 3153
    Turn on Disc-At-Once, using DVD media

    4:53:28 PM #10 Text 0 File DlgWaitCD.cpp, Line 260
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2286111 (508:01.36, 4465MB)

    4:53:28 PM #11 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO

    4:53:28 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339
    Recorder: BENQ DVD DD DW1640, Media type: DVD+R

    4:53:28 PM #13 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)

    4:53:28 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [BENQ DVD DD DW1640]
    --------------------------------------------------------------

    4:53:28 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [BENQ DVD DD DW1640] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286112 | lead-out | 1 | 0x41 | 0x00

    4:53:28 PM #16 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    4:53:28 PM #17 Text 0 File Burncd.cpp, Line 4037
    Cache writing successful.

    4:53:28 PM #18 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    4:53:28 PM #19 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 8x (11,080 KB/s)

    4:53:28 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    4:53:28 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03EB0600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
    0x00 0x00 0x00 0x00 0x24 0x00

    4:53:28 PM #22 Text 0 File DVDR.cpp, Line 5601
    Drive: BENQ DVD DD DW1640
    Book Type request [gen]: DVD-ROM, write to EEPROM
    Changing the Book Type was finished successfully, return code 0

    4:53:28 PM #23 CDR -1211 File DVDR.cpp, Line 4768
    Book Type set to: DVD-ROM

    4:53:28 PM #24 Text 0 File DVDPlusRW.cpp, Line 648
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:01:27 PM #25 Text 0 File WriterStatus.cpp, Line 116
    <BENQ DVD DD DW1640 > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

    5:01:27 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    5:01:47 PM #27 Text 0 File DVDR.cpp, Line 5601
    Drive: BENQ DVD DD DW1640
    Book Type request [gen]: DVD-ROM, write to EEPROM
    Changing the Book Type was finished successfully, return code 0

    5:01:47 PM #28 Phase 37 File APIProgress.cpp, Line 276
    Burn process completed successfully at 8x (11,080 KB/s)

    5:01:48 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    5:01:48 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  4. #4
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    wrong log
    "Burn process completed successfully at 8x (11,080 KB/s)"

    anyway the media is not correctly identifed by nero, firmware is only ine step behind,
    must be newer media.
    Last edited by Chewy; 16 Nov 2005 at 07:06 AM

  5. #5
    just farted
    Join Date
    Aug 2004
    Location
    dumpster behind mcdonalds
    Posts
    314

    Default

    what media are you using and firmware revision do you have?

    the BenQ DW1640 doesnt overspeed media at all unless you have firmware BSKB or later installed (newest is BSMB). You will also need Qsuite 2.1 to enable overspeeding with the drive. you can get Qsuite and firmware updates here:
    http://support.benq.com/front/BenqMa...nMenu=&RootId=
    Qsuite is under "Software(Patch)".

    i'm guessing the media you have is faster than 2.4x rated, but if it IS 2.4x rated media, then thats your problem.

  6. #6
    Junior Member
    Junior Member

    Join Date
    Nov 2005
    Posts
    3

    Default

    i use either taiyo yuden or verbatim media rated for 8x. i have firmware BSLB which I updated to when I got the new drive a few months ago. I don't know about Qsuite, as the NEC drive I had didn't mention that.

  7. #7
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    Quote Originally Posted by nkilroy
    I recently had a new computer built,
    something funny? you have a serial hard drive? but

    "DiskPeripheral : SAMSUNG HD160JJ atapi Port 1 ID 0 DMA: On"

    and this shouldn't be empty?
    "Existing drivers: "

    bad build and/or bad load

  8. #8
    Junior Member
    Junior Member

    Join Date
    Nov 2005
    Posts
    8

    Default

    I had a BENQ 1620Pro I just bought and returned it. If you look at BENQ's website you can only use certain media. You can not use HP or Memorex dvds. I bought Sony ones which were on the list and still had problems. I returned the drive and got a Sony which is great.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •