Announcement

Collapse
No announcement yet.

Sudden failure(s) in making copy of back-up

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dunlop
    Junior Member
    Junior Member
    • Oct 2005
    • 31

    Sudden failure(s) in making copy of back-up

    Relative newbie here with a query.
    Last week backed up a copy of War of the Worlds using AnyDvd/DVDShrink flawlessly. Decided to make a copy of my back-up,as I have done numerous times in the past, going directly to Nero>Favorites>Copy disc. Burned copy no problem. Puppy scratched DVD so I repeated the process. However this time got Burn Failure
    after two attempts at around 55%.Media is Verbatim ...tried at 4x&6x.
    Any observations as to why Iam getting these Burn Failure Nags would be greatly appreciated.
    dunlop
  • blutach
    Not a god of digital video
    • Oct 2004
    • 24627

    #2
    The process fails in the read or write phase?

    Read and implement the Golden Rules of Burning.

    Regards
    Les

    Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

    Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
    [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

    Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

    Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


    You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

    Explore the sites and the programs - there's a gold mine of information in them

    Don't forget to play the Digital Digest Quiz!!! (Click here)

    Comment

    • dunlop
      Junior Member
      Junior Member
      • Oct 2005
      • 31

      #3
      Hi Blutach- Thanks for the response.
      Process fails at around 55% using Nero by itself. Tried to c/p Nero log but was informed it was too large a document.
      Again...just curious as to why this problem all of a sudden. Just to make sure Nero was working allright I just made a copy of another back-up with no problem.

      Comment

      • Chewy
        Super Moderator
        • Nov 2003
        • 18971

        #4
        go down to the bottom of the log till you hit the last

        serial number
        "Windows XP 5.1
        IA32
        WinAspi: -"
        this is the beginning of the last burn
        start the copy just after your serial number


        btw the war of the worlds backup was probably a bad burn or a bad blank
        it would be nice if everything was consistent

        Comment

        • dunlop
          Junior Member
          Junior Member
          • Oct 2005
          • 31

          #5
          Thanks Chewy. Here's the info. Again, my original back-up is fine ...it's playing
          now. Just can't figure out why I can't repeat the same process I did a few day's ago!(Copy of a back-up)

          Windows XP 5.1
          IA32
          WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 09/02/2005 3:09:12 PM
          ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 06/17/2003 8:25:03 AM
          Nero version: 6.0.0.28 (Nero Express)
          Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS04 - HA 1 TA 0 - 6.0.0.28
          Adapter driver: <atapi> HA 1
          Drive buffer : 2048kB
          Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
          Connected to MMC as unknown drive with class-nr : 1
          Drive is autodetected - recorder class: Std. MMC recorder
          CD-ROM: <LITE-ON COMBO LTC-48161H>Version: KH0F - HA 1 TA 1 - 6.0.0.28
          Adapter driver: <atapi> HA 1
          === Scsi-Device-Map ===
          DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 0 ID 0 DMA: Off
          CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 0 DMA: On
          CdRomPeripheral : LITE-ON COMBO LTC-48161H atapi Port 1 ID 1 DMA: On
          === CDRom-Device-Map ===
          LITE-ON DVDRW SOHW-1693S D: CDRom0
          LITE-ON COMBO LTC-48161H E: CDRom1
          =======================
          AutoRun : 1
          Excluded drive IDs:
          CmdQueuing : 1
          CmdNotification: 2
          WriteBufferSize: 57671680 (0) Byte
          ShowDrvBufStat : 0
          EraseSpeed : 0
          BUFE : 0
          Physical memory : 381MB (391152kB)
          Free physical memory: 39MB (40816kB)
          Memory in use : 89 %
          Uncached PFiles: 0x0
          Use Static Write Speed Table: 0
          Use Inquiry : 1
          Global Bus Type: default (0)
          Check supported media : Disabled (0)
          29.11.2005
          DVD-Copy on the fly
          3:18:31 PM #1 Text 0 File Reader.cpp, Line 118
          Reader running

          3:18:31 PM #2 Text 0 File Writer.cpp, Line 124
          Writer LITE-ON DVDRW SOHW-1693S running

          3:18:31 PM #3 Text 0 File DVDCopy.cpp, Line 239
          DVD Track-Information from source disc
          S01 T01 Con 0x14 Start 0 Len 2269520 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

          3:18:31 PM #4 Text 0 File DVDCopy.cpp, Line 332
          Max -1 tracks of 1 allowed to copy
          1: 0 - 2269520 = 2269520, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

          3:18:31 PM #5 Text 0 File Burncd.cpp, Line 3128
          Turn on Disc-at-once, using DVD media

          3:18:32 PM #6 Text 0 File DlgWaitCD.cpp, Line 237
          Last possible write address on media: 2295103 (510:01.28)
          Last address to be written: 2269519 (504:20.19)

          3:18:32 PM #7 Text 0 File DlgWaitCD.cpp, Line 242
          Write in overburning mode: FALSE

          3:18:32 PM #8 Text 0 File DlgWaitCD.cpp, Line 2043
          Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD+R
          Disc Manufacturer ID: MBIPG101, Media Type ID: R04, Product revision number: 1
          Disc Application Code: 0, Extended Information Indicators: 3

          3:18:32 PM #9 Text 0 File DlgWaitCD.cpp, Line 403
          >>> Protocol of DlgWaitCD activities: <<<
          =========================================

          3:18:32 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 775
          Setup items (after recorder preparation)
          0: TRM_DATA_MODE1 (1 Data (mode 1))
          2 indices, index0 (150) not provided
          original disc pos #0 + 2269520 (2269520) = #2269520/504:20.20
          not relocatable, disc pos for caching/writing not required/not required, no patch infos
          -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2269520 blocks [LITE-ON DVDRW SOHW-1693S]
          --------------------------------------------------------------

          3:18:32 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 944
          Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
          DAO infos:
          ==========
          MCN: ""
          TOCType: 0x40; Session Closed, disc fixated
          Tracks 1 to 1:
          1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4647976960, ISRC ""
          DAO layout:
          ===========
          __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
          0 | lead-in | 0 | 0x00 | 0x41
          0 | 1 | 0 | 0x00 | 0x41
          0 | 1 | 1 | 0x00 | 0x41
          2269520 | lead-out | 1 | 0x00 | 0x41

          3:18:32 PM #12 Phase 36 File dlgbrnst.cpp, Line 1800
          Burn process started at 8x (11,040 KB/s)

          3:18:32 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2167
          Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

          3:18:32 PM #14 Text 0 File Cdrdrv.cpp, Line 7912
          ---- DVD Structure: Physical Format Information (00h) ----
          Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
          Book Type: DVD+R (10), Part Version: 1
          Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
          Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
          Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
          Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
          End Physical Sector Number of Data Area: 26053F h
          End Sector Number in Layer 0: 0 h
          Data in Burst Cutting Area (BCA) does not exist
          Media Specific:
          00 03 4D 42 49 50 47 31 - 30 31 52 30 34 01 38 23 ..MBIPG101R04.8#
          54 37 12 02 42 6E 02 A8 - 6B 15 15 0B 0B 08 08 01 T7..Bn..k.......
          19 1B 0C 0C 0C 0D 01 00 - 00 00 00 00 00 00 00 01 ................

          3:18:32 PM #15 Text 0 File dlgbrnst.cpp, Line 1658
          Set remaining time: 7:08,338 (428338ms) -> OK

          3:18:32 PM #16 Text 0 File DVDPlusRW.cpp, Line 607
          Start write address at LBA 0
          DVD high compatibility mode: Yes

          3:33:41 PM #17 SCSI -1128 File Cdrdrv.cpp, Line 1430
          SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x07D73000
          Status: 0x04 (0x01, SCSI_ERR)
          HA-Status 0x00 (0x00, OK)
          TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
          Sense Key: 0x03 (KEY_MEDIUM_ERROR)
          Sense Code: 0x11
          Sense Qual: 0x05
          CDB Data: 0x28 0x00 0x00 0x12 0xE9 0x40 0x00 0x00 0x20 0x00 0x00 0x00
          Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
          0x00 0x00 0x00 0x00 0x11 0x05

          3:33:42 PM #18 SCSI -1128 File Cdrdrv.cpp, Line 1430
          SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x07D73000
          Status: 0x04 (0x01, SCSI_ERR)
          HA-Status 0x00 (0x00, OK)
          TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
          Sense Key: 0x03 (KEY_MEDIUM_ERROR)
          Sense Code: 0x11
          Sense Qual: 0x05
          CDB Data: 0x28 0x00 0x00 0x12 0xE9 0x40 0x00 0x00 0x20 0x00 0x00 0x00
          Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
          0x00 0x00 0x00 0x00 0x11 0x05

          3:33:42 PM #19 TRANSFER -25 File Reader.cpp, Line 371
          Error reading data

          3:33:46 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
          all writers idle, stopping conversion

          3:34:15 PM #21 Text 0 File dlgbrnst.cpp, Line 1658
          Set remaining time: 0:00,000 (0ms) -> OK

          3:34:15 PM #22 Text 0 File dlgbrnst.cpp, Line 1658
          Set remaining time: 0:00,000 (0ms) -> OK

          3:34:15 PM #23 Phase 38 File dlgbrnst.cpp, Line 1800
          Burn process failed at 8x (11,040 KB/s)

          Existing drivers:
          File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 09/02/2005 3:09:11 PM
          File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 08/03/2004 11:59:42 PM (Adapter driver for rec)
          Registry Keys:
          HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

          Comment

          • jmet
            Super Moderator
            • Nov 2002
            • 8697

            #6
            "Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS04 "
            Update your firmware. You are 3 versions behind. Go here and download " KS0B" - http://forum.rpc1.org/dl_firmware.php?download_id=2056

            Make sure you have the latest firmware for your burner. That will ensure more media compatibility.

            Installing your firmware:

            1. Don't run any other programs at the same time
            2. Don't have any disc in your burner at the same time
            3. Restart your PC after you have flashed it.

            "DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 0 ID 0 DMA: Off"
            Check your DMA settings - How ? do this -> Go to Control Panel> System> Hardware Tab> Device Manager> IDE ATA/ATAPI controllers> Right Click Primary IDE channel (and Secondary IDE channel after you finish with Primary)> Properties> Advanced Settings Tab> Transfer Mode or go here: http://club.cdfreaks.com/showthread.php?t=101616

            Do the above from both "Primary & Secondary IDE channels".

            I (We) and you need to look at whats in both "Transfer Mode" and "Current Transfer Mode". Screen shot below is what I'm talking about.


            If it is in "PIO" mode. Click the "Driver" tab, and uninstall the driver. Then reboot. Upon rebooting windows will automatically reinstall the driver and it should go back to "DMA" mode.



            (Your screen may or may not look the same as my screen shots)

            "Physical memory : 381MB (391152kB)
            Free physical memory: 39MB (40816kB)
            Memory in use : 89 %"
            Free up some system memory. All of those icons next to your PC's clock. Right click on them, then left click on "Exit" before you start burning. You can also go here to learn how to stop these programs from starting up every time you reboot. - http://forum.digital-digest.com/showthread.php?t=56373

            "DVD-Copy on the fly"
            On the fly is bad idea, especially if your DMA is off! Go here on how to copy the data to your hard drive first with Nero. - http://forum.digital-digest.com/show...threadid=45497

            A easier way it to do a ISO Read then a ISO Write in DVD Decrypter like this - http://forum.digital-digest.com/show...threadid=48358

            "Burn process started at 8x (11,040 KB/s)
            "
            I highly recommend burning at 2X, 4X at the fastest.

            "Disc Manufacturer ID: MBIPG101"
            Use a better brand of media such as Verbatim or Taiyo Yuden from a reputable store.

            Comment

            • dunlop
              Junior Member
              Junior Member
              • Oct 2005
              • 31

              #7
              JMET-Thanks...for all. After all your efforts the very least I could do was to thank you at both your habitats.

              Comment

              • Chewy
                Super Moderator
                • Nov 2003
                • 18971

                #8
                jmet got almost all of them(a lot)
                if you stay with nero
                "Nero version: 6.0.0.28 (Nero Express)"
                I would update.

                what's a little scary is the hard drive in pio mode with sp2

                don't pitch that media yet

                after firmware update it might burn a lot better

                "Model : 3-0-0-0 LITE-ON DVDRW SOHW-1693S KS0A
                Disc : DVD+R , MBIPG101R04 [Moser Baer India Limited]
                Speed : 4x
                ECC blocks sum (PI/PIF) : 8/1
                Scanned range : 0 - 2204474
                Sampling count : 126315
                Errors : 0
                PI Max : 8
                PI Average : 0,50
                PI Total : 7990
                PIF Max : 2
                PIF Average : 0,01
                PIF Total : 176

                Very good. "
                Last edited by Chewy; 30 Nov 2005, 09:32 PM.

                Comment

                • dunlop
                  Junior Member
                  Junior Member
                  • Oct 2005
                  • 31

                  #9
                  Chewy...and many thanks to you also.With the exception of the Nero update,I have followed all recommendations. Successfully updated firware. As you noted,was in PIO mode>uninstalled the driver>rebooted and returned to "DMA" mode.
                  Will do some more testing when I get home from work tonight.

                  Comment

                  • dunlop
                    Junior Member
                    Junior Member
                    • Oct 2005
                    • 31

                    #10
                    Jmet/Chewy...everything workin' fine. Thanks again.
                    Was able to cut Nero Burniing time by about 30%.
                    Dunlop

                    Comment

                    • jmet
                      Super Moderator
                      • Nov 2002
                      • 8697

                      #11
                      Great!! I'm glad you got it all sorted out!!

                      Comment

                      Working...
                      😀
                      🥰
                      🤢
                      😎
                      😡
                      👍
                      👎