Page 1 of 2 12 LastLast
Showing results 1 to 15 of 28

Thread: Nero "upgrade" is not!

  1. #1
    Junior Member
    Junior Member

    Join Date
    Aug 2005
    Posts
    19

    Default Nero "upgrade" is not!

    I have just updated my Nero installation to 6.6.0.18 and everything seemed fine...... My first backup to DVD+RW following the "upgrade" would not play on my stand alone. I tried again using DVD-RW, same story. Suspecting that the rip and split for this title may be the problem, I burned a previous DVD that was still on my hard drive. This title had been burned to DVD+RW with the previous version of Nero and this played on my standalone with no problems, however, the same files burned to DVD+RW with the "upgraded" version of Nero would not play on the standalone, therefore the culprit is the Nero upgrade.

    The disks spin up in the standalone (Pacific 1002), but then stop after about 30sec, they will play in my PC, disks burned with previous Nero incarnations still play OK in the standalone.

    I will uninstall Nero and re-install an older version, but this means that I will no long be able to upgrade.

    Has anyone else seen this problem?

  2. #2
    Not a god of digital video blutach's Avatar
    Join Date
    Oct 2004
    Location
    is everything!
    Posts
    24,627

    Default

    Post your Ner0 log please! It is in C:\Program Files\Ahead\Nero\NeroHistory.log

    Your DMA might be off. Read and implement the Golden Rules of Burning.

    Regards

  3. #3
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    I have put the .18 on three computers in the last month, no problems here.
    All bittsetting glitches have disappeared.

  4. #4
    Junior Member
    Junior Member

    Join Date
    Aug 2005
    Posts
    19

    Default

    Thanks Chewy, have you burned any movie backups using RWs (of either type), with these installations? I ask as I have not tried burning any data format DVDs, only movies and only RW.

  5. #5
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    I never use RW, never will. sorry no help here.

  6. #6
    Junior Member
    Junior Member

    Join Date
    Aug 2005
    Posts
    19

    Default

    Looks like my DMA is OK Blutach, see below for the logfile for the last burn.

    Considering Nero 7 is now out there will probably be no further V6 updates, so unless someone can spot something obvious, I think that I will uninstall 6.6.0.18 and reinstall up to 6.6.0.12, that version was working fine for me.

    ====== *** Nero-Burning Rom, History File *** ======

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e
    Recorder: <BENQ DW1620 DD DVD>Version: B7T9 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <ATAPI>HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <BENQ DW1620 DD DVD>Version: B7T9 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <ATAPI>HA 1
    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : MAT****A DVD-RAM SW-9571 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 0 DMA: On
    DiskPeripheral : IOMEGA ZIP 250 atapi Port 1 ID 1 DMA: On
    === CDRom-Device-Map ===
    MAT****A DVD-RAM SW-9571 G: CDRom0
    BENQ DVD DD DW1620 F: CDRom1
    LITEON DVD-ROM LTD163 H: CDRom2
    =======================
    AutoRun : 0
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1047552kB)
    Free physical memory: 611MB (626240kB)
    Memory in use : 40
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    4.12.2005
    UDF/ISO compilation
    20:54:06 #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    20:54:08 #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    20:54:08 #3 Text 0 File Isodoc.cpp, Line 6359
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    20:54:08 #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    20:54:08 #5 Text 0 File Reader.cpp, Line 127
    Reader running

    20:54:08 #6 Text 0 File Writer.cpp, Line 122
    Writer BENQ DVD DD DW1620 running

    20:54:08 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    20:54:08 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    20:54:08 #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    20:54:12 #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2131775 (473:43.50, 4163MB)

    20:54:12 #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    20:54:12 #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: BENQ DVD DD DW1620, Media type: DVD+RW
    Disc Manufacturer ID: MKM, Media Type ID: A02, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 0

    20:54:12 #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
    This disc is not empty.
    (Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
    Accessing disc...
    (Medium in drive: DVD+RW. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)

    20:54:12 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2131776 (2131776) = #2131776/473:43.51
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2131776 blocks [BENQ DVD DD DW1620]
    --------------------------------------------------------------

    20:54:12 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [BENQ DVD DD DW1620] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4365877248, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2131776 | lead-out | 1 | 0x41 | 0x00

    20:54:13 #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    20:54:13 #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    20:54:13 #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    20:54:13 #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    20:54:13 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    20:54:13 #21 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 1.1x (2)
    Disc Size: 120 mm, Maximum Rate: <NOT specified>(F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 0 h
    Disc Manufacturer ID: MKM.....
    Media type ID: A02
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 00 4D 4B 4D 00 00 - 00 00 00 41 30 32 00 39 ...MKM.....A02.9
    23 00 94 79 64 02 20 00 - 9C 7A 6C 02 20 00 9A 7B #..yd....zl....{
    68 02 20 12 12 10 E0 00 - F0 00 00 00 00 00 00 00 h...............

    20:54:13 #22 Text 0 File DVDPlusRW.cpp, Line 659
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    21:07:44 #23 Text 0 File WriterStatus.cpp, Line 116
    <BENQ DW1620 DD DVD>start writing Lead-Out at LBA 2131776 (208740h), lenght 0 blocks

    21:07:44 #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    21:07:45 #25 CDR -1207 File DVDR.cpp, Line 5306
    Book Type automatically set to: Current recorder setting

    21:07:45 #26 Phase 37 File dlgbrnst.cpp, Line 1832
    Burn process completed successfully at 4x (5,540 KB/s)

    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 14:07:32
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20/12/2004 18:37:14 (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 2, 9, 1, size=90880 bytes, created 24/05/2004 12:57:34 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 2, 9, 1, size=25600 bytes, created 24/05/2004 12:57:52 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 2, 9, 1, size=5760 bytes, created 24/05/2004 12:59:24 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  7. #7

  8. #8
    Junior Member
    Junior Member

    Join Date
    Aug 2005
    Posts
    19

    Default

    Hmm, well the only change in a formerly rock solid system was the 6.6.0.18 upgrade, since I have just ordered a BenQ 1640 to replace my 1620 I think I'll just reinstall Nero to 6.6.0.12 and satisfy myself that everything is OK once again before I install the new burner. That way I'll be dealing with one variable at a time which will be important as I'll certainly want to modify the f/w on the new burner.

    As for InCD, I thought that I had uninstalled that quite a while ago, does it leave remnants that need special utilities to remove?

  9. #9

  10. #10
    Junior Member
    Junior Member

    Join Date
    Aug 2005
    Posts
    19

    Default

    Thanks Blutach, I'll give the InCD cleaner a whirl, if it does not cure the problem I will perform the "ungrade".

    Nobody else seems to have had problems with 6.6.0.18, so it looks as though it may be something idiosyncratic to my system or standalone.

  11. #11

  12. #12
    Junior Member
    Junior Member

    Join Date
    Aug 2005
    Posts
    19

    Default

    Hmm, I take it you are an ISO burning fan.

    Would you recommend that I convert my files to an ISO after my "manipulations" and use DVD Decrypter or similar to burn?

    I must admit I've always just used Nero as it has never let me down before and it does not require the extra ISO conversion step. I suppose it's a bit lazy of me not to have explored alternative routes, but once I had a stable and reliable (up till now!), backup system I just used it.

  13. #13

  14. #14
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    "I must admit I've always just used Nero as it has never let me down before and it does not require the extra ISO conversion step. I suppose it's a bit lazy of me not to have explored alternative routes, but once I had a stable and reliable (up till now!), backup system I just used it."

    Switching to decrypt or imageburn just sidesteps the real issue.

    "WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 14:07:32
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20/12/2004 18:37:14 (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 2, 9, 1, size=90880 bytes, created 24/05/2004 12:57:34 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 2, 9, 1, size=25600 bytes, created 24/05/2004 12:57:52 (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 2, 9, 1, size=5760 bytes, created 24/05/2004 12:59:24 (InCD4 driver for win NT/2K/XP)"

    my log is missing these, nero works fine for me, every update gets better.
    I won't go to 7 for at least 6-12 months tho.

  15. #15

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •