Showing results 1 to 10 of 10

Thread: Newbie question about Nero 7

  1. #1
    Junior Member
    Junior Member

    Join Date
    Dec 2005
    Posts
    5

    Default Newbie question about Nero 7

    I have been trying to burn a disk from a avi file which I have converted to dvd, I start shrink and it goes through the process...then nero comes in and it attempts to burn, however it bombs out and here is the error log....any help would be greatly appreciated.



    Nero Serial Removed
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
    NT-SPTI used
    Nero API version: 7.0.1.2
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: ahead\Nero - Burning Rom
    Internal Version: 7, 0, 1, 2
    Recorder: <DVDRW IDE1008> Version: 0054 - HA 1 TA 0 - 7.0.1.2
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD200BB-00AUA1 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: On
    === CDRom-Device-Map ===
    DVDRW IDE1008 D: CDRom0
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 639MB (654812kB)
    Free physical memory: 417MB (427548kB)
    Memory in use : 34
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    8.12.2005
    NeroAPI
    10:42:52 AM #1 Phase 112 File APIProgress.cpp, Line 278
    DVD-Video files reallocation started

    10:42:52 AM #2 Phase 114 File APIProgress.cpp, Line 278
    DVD-Video files reallocation completed (no file modified)

    10:42:53 AM #3 Phase 111 File APIProgress.cpp, Line 278
    DVD-Video files sorted

    10:43:31 AM #4 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 262144KB of Memory

    10:43:31 AM #5 Text 0 File Reader.cpp, Line 124
    Reader running

    10:43:31 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    10:43:31 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    10:43:31 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    10:43:31 AM #9 Text 0 File Burncd.cpp, Line 3302
    Turn on Disc-At-Once, using DVD media

    10:44:28 AM #10 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1502815 (333:57.40, 2935MB)

    10:44:28 AM #11 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO

    10:44:28 AM #12 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: DVDRW IDE1008, Media type: DVD+R
    Disc Manufacturer ID: CMC MAG, Media Type ID: F01, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 1

    10:44:28 AM #13 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

    10:44:28 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1502816 (1502816) = #1502816/333:57.41
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1502816 blocks [D: DVDRW IDE1008]
    --------------------------------------------------------------

    10:44:28 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [D: DVDRW IDE1008] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3077767168, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1502816 | lead-out | 1 | 0x41 | 0x00

    10:44:28 AM #16 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    10:44:28 AM #17 Phase 24 File APIProgress.cpp, Line 278
    Caching of files started

    10:44:28 AM #18 Text 0 File Burncd.cpp, Line 4132
    Cache writing successful.

    10:44:28 AM #19 Phase 25 File APIProgress.cpp, Line 278
    Caching of files completed

    10:44:28 AM #20 Phase 36 File APIProgress.cpp, Line 278
    Burn process started at 4x (5,540 KB/s)

    10:44:28 AM #21 SPTI -1066 File SCSIPassThrough.cpp, Line 323
    D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
    Buffer x00b52000: Len x4000

    10:44:28 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    10:44:28 AM #23 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: CMC.MAG.
    Media type ID: F01
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 01 43 4D 43 20 4D - 41 47 00 46 30 31 00 38 ...CMC.MAG.F01.8
    23 54 37 10 02 48 71 02 - 8C 69 16 16 0B 0B 0A 0A #T7..Hq..i......
    01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................

    10:44:52 AM #24 SPTI -1196 File SCSIPassThrough.cpp, Line 323
    D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x3A
    Sense Qual: 0x02
    CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
    Buffer x0678a000: Len x20

    10:44:52 AM #25 SPTI -1196 File SCSIPassThrough.cpp, Line 323
    D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x3A
    Sense Qual: 0x02
    CDB Data: 0x52 01 00 00 00 FF 00 00 1C 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
    Buffer x0678a000: Len x1c

    10:44:52 AM #26 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:44:52 AM #27 CDR -1196 File ThreadedTransferInterface.cpp, Line 1799
    Disc not present - tray open
    D: DVDRW IDE1008

    10:44:52 AM #28 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
    Could not perform start of Disc-at-once

    10:44:52 AM #29 Phase 38 File APIProgress.cpp, Line 278
    Burn process failed at 4x (5,540 KB/s)

    10:44:52 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    10:44:52 AM #31 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.

    Existing drivers:
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
    ====== *** NeroAPI, History File *** ======

  2. #2
    Digital Video Master
    Digital Video Master
    geno888's Avatar
    Join Date
    Dec 2005
    Location
    Italy
    Posts
    1,081

    Default

    Welcome to the forum.

    Until now, for what I know, so don't take it as an absolute statement, the only solution to nero 7 problems is to revert to nero 6.

    Try to do a two phases process.

    First create an ISO file with DVD shrink, and then burn this file with nero without using shrink. Maybe this can solve your problem.

  3. #3
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    update your firmware
    http://www.iomagic.com/Firmware/FirmwareDownload.html
    if that doesn't work(it'll get you further into the burn)
    buy better media or slower

  4. #4
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    when we find out your exact drive there's a new modded firmware available at
    http://forum.rpc1.org/dl_firmware.php?download_id=1727

    to say the least that's a problematic burner

  5. #5
    Junior Member
    Junior Member

    Join Date
    Dec 2005
    Posts
    5

    Default

    Quote Originally Posted by Chewy
    when we find out your exact drive there's a new modded firmware available at
    http://forum.rpc1.org/dl_firmware.php?download_id=1727

    to say the least that's a problematic burner
    ahhh, I tried the iso image above. It bombed out as well. The strange thing is this burner worked great with the current disks I have. I just reloaded the machine recently and am now attempting to burn with it again, and now it doesn't seem to work. It will burn normal CD's with XP's built in software, just not dvd's as of yet with the reload of op system....

    I used nero info tool and here is what it found.

  6. #6
    Junior Member
    Junior Member

    Join Date
    Dec 2005
    Posts
    5

    Default

    Looks like the link you provided has the firmware for me....at least the 054 is listed, however it's greyed out and I can't click on it. Thanks for all the quick replies...

  7. #7
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    it's grayed out because they don't want anyone to use it, btc has
    dropped support?

    is it an iomagic? btc??

    were the disks off the same spindle?

    edit! you don't want the 54, it's old and probably bad.
    Last edited by Chewy; 9 Dec 2005 at 05:30 AM

  8. #8
    Junior Member
    Junior Member

    Join Date
    Dec 2005
    Posts
    5

    Default

    ahhh...so is it safe to assume that I could you one of the other versions? I haven't messed with this firmware stuff before.

    I bought this burner so long ago. It says micro-advantage on the top of it. I just google'd it and found http://www.microadvantage.net/consum...1&view=support I'm going to apply all the firmware and software updates. I will post back when done.

  9. #9
    Junior Member
    Junior Member

    Join Date
    Dec 2005
    Posts
    5

    Default

    You da man!! The firmware upgrade worked...

    Now I just have to figure out the format issue, it will play on one dvd player but not the other. I believe the one it won't play on, only reads +R... So, I will work on that. The burning portion works great. I did the iso thing first, haven't tried to use shrink directly yet, however it should work fine.

    Thanks agian Chewy!!!

  10. #10
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    ur welcome
    we all get lucky sometime
    btw good googling

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Simple Question from a Newbie who needs alot of help.
    By Aragon99 in forum DVD Authoring and Editing
    Replies: 6
    Last Post: 9 Mar 2003, 05:08 AM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •