Showing results 1 to 13 of 13

Thread: TDK 16x DVD-R error

  1. #1
    Platinum Member
    Platinum Member
    kimomakano's Avatar
    Join Date
    Jun 2002
    Posts
    157

    Default TDK 16x DVD-R error

    I have an Indi DVD 12x+/8x- Internal Multiformat Burner (TDK) and have not had many problems until recently. I purchased a spindle of TDK 16x DVD-R discs from Costco and when I try to burn my backups I get an error saying illegal disc.

    I am using Nero 6 to burn, which has always worked good for me. When I am in the burn options the only burn speeds it shows are 1,2,4.

    I have the lasted firmware installed and TDK tech support said it should be able to burn these discs.

    Any ideas?
    Thanks.

  2. #2
    Demigod of Digital Video
    LT. Columbo's Avatar
    Join Date
    Nov 2004
    Location
    Los Angeles, CA
    Posts
    10,671
    "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
    Columbo moments...
    "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
    "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
    (An Exercise In Fatality, 1974)



  3. #3
    Platinum Member
    Platinum Member
    kimomakano's Avatar
    Join Date
    Jun 2002
    Posts
    157

    Default

    Here it is.

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <TDK DVDRW1280B> Version: T7S4 - HA 2 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 2
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder
    CD-ROM: <TSSTcorp DVD-ROM SH-D162C>Version: TS02 - HA 2 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 2

    === Scsi-Device-Map ===
    CdRomPeripheral : TDK DVDRW1280B atapi Port 2 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp DVD-ROM SH-D162C atapi Port 2 ID 1 DMA: On
    DiskPeripheral : HDS728080PLAT20 atapi Port 3 ID 0 DMA: On
    DiskPeripheral : WDC WD1600BB-00HTA0 atapi Port 3 ID 1 DMA: On

    === CDRom-Device-Map ===
    TDK DVDRW1280B J: CDRom0
    TSSTcorp DVD-ROM SH-D162C K: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 702MB (719336kB)
    Free physical memory: 261MB (267684kB)
    Memory in use : 62 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    15.12.2005
    UDF/ISO compilation
    5:55:52 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    5:55:52 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    5:55:52 PM #3 Text 0 File Isodoc.cpp, Line 6359
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    5:55:52 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    5:55:52 PM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    5:55:52 PM #6 Text 0 File Writer.cpp, Line 122
    Writer TDK DVDRW1280B running

    5:55:52 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    5:55:53 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    5:55:53 PM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    5:55:53 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1835391 (407:51.66, 3584MB)

    5:55:53 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    5:55:53 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: TDK DVDRW1280B, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    5:55:53 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    5:55:53 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1835392 (1835392) = #1835392/407:51.67
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1835392 blocks [TDK DVDRW1280B]
    --------------------------------------------------------------

    5:55:53 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [TDK DVDRW1280B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3758882816, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1835392 | lead-out | 1 | 0x41 | 0x00

    5:55:53 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    5:55:53 PM #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    5:55:53 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    5:55:53 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    5:55:53 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    5:55:53 PM #21 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    5:55:53 PM #22 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

    5:55:53 PM #23 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:55:53 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    5:55:55 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x033C0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    5:55:55 PM #26 CDR -1046 File Writer.cpp, Line 311
    Illegal disc

    5:55:55 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    5:55:55 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    5:55:55 PM #29 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was -1

    5:55:55 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 7:59:44 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  4. #4
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    Illegal disc
    where did you get that firmware?

  5. #5
    Demigod of Digital Video
    LT. Columbo's Avatar
    Join Date
    Nov 2004
    Location
    Los Angeles, CA
    Posts
    10,671

    Default

    does appear to be the most recent
    http://forum.rpc1.org/dl_firmware.php?download_id=1857

    what media did you use before if different from these?
    Last edited by LT. Columbo; 16 Dec 2005 at 05:34 PM
    "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
    Columbo moments...
    "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
    "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
    (An Exercise In Fatality, 1974)



  6. #6
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    tired eyes

  7. #7
    Platinum Member
    Platinum Member
    kimomakano's Avatar
    Join Date
    Jun 2002
    Posts
    157

    Default

    The firmware came from the TDK support site for the burner.

    The disks I used before were TDK DVD+R 8x. I got the DVD-R because I can play them on my Philips DVD player (it won't play +R).

  8. #8
    Demigod of Digital Video
    LT. Columbo's Avatar
    Join Date
    Nov 2004
    Location
    Los Angeles, CA
    Posts
    10,671

    Default

    i would try another media. do you have an RW disc?

    also, you might be able to make good use of the +r discs by changing the book-type to dvd-rom if your writer supports bitsetting
    http://forum.digital-digest.com/show...threadid=46559
    Last edited by LT. Columbo; 16 Dec 2005 at 05:54 PM
    "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
    Columbo moments...
    "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
    "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
    (An Exercise In Fatality, 1974)



  9. #9
    Platinum Member
    Platinum Member
    kimomakano's Avatar
    Join Date
    Jun 2002
    Posts
    157

    Default

    Yeah, I still have some +R discs left but now am stuck with a spindle of 50 -R discs that won't work. That is what really sort of bums me out.

    I forgot about the book-type thing. I had downloaded some small app that did that but can't recall where I put it. I will try that. I guess I will need to try and return the spindle, but that will really be a hassle (long story).

  10. #10
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    LT,
    you're the liteon man around here, I noticed the rebadge, but even the liteon
    drive has nothing recent, what's up with that?

  11. #11
    Demigod of Digital Video
    LT. Columbo's Avatar
    Join Date
    Nov 2004
    Location
    Los Angeles, CA
    Posts
    10,671

    Default

    Quote Originally Posted by kimomakano
    Yeah, I still have some +R discs left but now am stuck with a spindle of 50 -R discs that won't work. That is what really sort of bums me out.

    I forgot about the book-type thing. I had downloaded some small app that did that but can't recall where I put it. I will try that. I guess I will need to try and return the spindle, but that will really be a hassle (long story).
    just tell them that the discs are bad, make a scene in the store if you have to. customer is always right. can't be passive.

    @chewy, i know, couldn't tell ya, try talking to their tech support!
    "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
    Columbo moments...
    "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
    "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
    (An Exercise In Fatality, 1974)



  12. #12
    Platinum Member
    Platinum Member
    kimomakano's Avatar
    Join Date
    Jun 2002
    Posts
    157

    Default

    Okay, I finally got the answer. I contacted Tech Support online again and posed the same question. This time however the tech told me that the discs were NOT compatible with my burner. According to him, DVD-R underwent some sort of major revision for the 16x and rendered them incompatible with my burner. When I asked him why the first tech had told me they were, he replied that he must have misread my post, yeah right!
    Anyway, I did try Verbatim 16x and had the same problem so I am assuming that this is correct. I contacted customer service and explained my predicament and they offered to mail me some replacement discs.

  13. #13
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    That's utter nonsense, all they had to do was update the firmware and tell
    the burners to use the same write strategy as slower disks. About the time TDK said goodbye liteon.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •