Page 1 of 2 12 LastLast
Showing results 1 to 15 of 23

Thread: DvdShrink Burning Problems

  1. #1
    Junior Member
    Junior Member

    Join Date
    Jun 2004
    Location
    uk
    Posts
    13

    Angry DvdShrink Burning Problems

    Hi need some help if possible,ihave been using dvd shrink for over a year with no problems but now everytime i burn a dvd it gets right to the end of session saying writing lead out,then error message pops up saying burn failed cannot finalyze disk or cannot close disc at once have wasted 6 discs so far.
    Any suggestions please.

  2. #2
    Unavailable
    Join Date
    Jun 2005
    Posts
    321

    Default

    have you bought new discs recently

  3. #3
    Junior Member
    Junior Member

    Join Date
    Jun 2004
    Location
    uk
    Posts
    13

    Default

    yea tryed 2 different sorts been using for ages but only just got probs

  4. #4
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    what's your burning software?

  5. #5
    Junior Member
    Junior Member

    Join Date
    Jun 2004
    Location
    uk
    Posts
    13

    Default

    nero

  6. #6
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    mycomputer/c/programfiles/ahead/nero/nerohistory log
    at the bottom is your last burn
    copy and paste that part in reply

  7. #7
    Junior Member
    Junior Member

    Join Date
    Jun 2004
    Location
    uk
    Posts
    13

    Default

    Is this what you need
    13:05:17 #33 CDR -1176 File ThreadedTransferInterface.cpp, Line 1708
    Session fixation error
    LITE-ON DVDRW LDW-451S\H1 T0

    13:05:17 #34 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708
    Could not perform end of Disc-at-once

    13:05:17 #35 Text 0 File DVDR.cpp, Line 2256
    EndDAO: Last written address was -1

    13:05:17 #36 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09234000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    13:05:17 #37 Phase 38 File APIProgress.cpp, Line 273
    Burn process failed at 2x (2,770 KB/s)

    13:05:17 #38 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    13:05:17 #39 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 29/08/2002 12:00:00
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.4.21, size=23436 bytes, created 17/12/2002 11:32:46
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
    File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 22/04/2005 00:14:00 (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    [21.12.2005]------------------------------------
    12:41:47 Robot error messages from:
    ====== *** NeroAPI, History File *** ======

  8. #8
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    start at the last
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    and on to end

  9. #9
    Junior Member
    Junior Member

    Join Date
    Jun 2004
    Location
    uk
    Posts
    13

    Default

    Is this ok
    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
    Nero API version: 6.3.1.17
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <LITE-ON DVDRW LDW-451S> Version: GSB6 - HA 1 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD400EB-11CPF0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW LDW-451S atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SONY DVD-ROM DDU1613 atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    LITE-ON DVDRW LDW-451S D: CDRom0
    SONY DVD-ROM DDU1613 E: CDRom1
    AXV CD/DVD-ROM H: CDRom2
    CD-RW CDR-6S52 F: CDRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1048048kB)
    Free physical memory: 638MB (653700kB)
    Memory in use : 37 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    21.12.2005
    NeroAPI
    12:41:47 #1 Phase 112 File APIProgress.cpp, Line 273
    DVD-Video files reallocation started

    12:41:47 #2 Phase 114 File APIProgress.cpp, Line 273
    DVD-Video files reallocation completed (no file modified)

    12:41:47 #3 Phase 111 File APIProgress.cpp, Line 273
    DVD-Video files sorted

    12:41:47 #4 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x070B6000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    12:41:48 #5 Text 0 File Reader.cpp, Line 118
    Reader running

    12:41:48 #6 Text 0 File Writer.cpp, Line 124
    Writer LITE-ON DVDRW LDW-451S running

    12:41:48 #7 Text 0 File AudioCompilationImpl.cpp, Line 817
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    12:41:48 #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    12:41:48 #9 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    12:41:48 #10 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-At-Once, using DVD media

    12:41:48 #11 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1768335 (392:57.60, 3453MB)

    12:41:48 #12 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO

    12:41:48 #13 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: LITE-ON DVDRW LDW-451S, Media type: DVD-R
    Disc Manufacturer: TTG01 -
    Disc Application Code: 64, Disc Physical Code: 193

    12:41:48 #14 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:41:48 #15 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1768336 (1768336) = #1768336/392:57.61
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1768336 blocks [LITE-ON DVDRW LDW-451S ]
    --------------------------------------------------------------

    12:41:48 #16 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [LITE-ON DVDRW LDW-451S ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3621552128, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1768336 | lead-out | 1 | 0x00 | 0x41

    12:41:49 #17 Phase 24 File APIProgress.cpp, Line 273
    Caching of files started

    12:41:49 #18 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    12:41:49 #19 Phase 25 File APIProgress.cpp, Line 273
    Caching of files completed

    12:41:49 #20 Phase 36 File APIProgress.cpp, Line 273
    Burn process started at 2x (2,770 KB/s)

    12:41:49 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:41:49 #22 Text 0 File DVDR.cpp, Line 1879
    Recording mode: Sequential Recording Mode

    12:41:49 #23 Text 0 File Mmc.cpp, Line 20401
    Set BUFE: supported -> ON , SMART-BURN : ON

    12:41:49 #24 Text 0 File DVDR.cpp, Line 2020
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:41:49 #25 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    12:41:49 #26 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09234000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    12:42:03 #27 Text 0 File Cdrdrv.cpp, Line 1294
    12:42:03.109 - LITE-ON DVDRW LDW-451S\H1 T0 : Queue again later

    13:04:42 #28 Text 0 File WriterStatus.cpp, Line 115
    <LITE-ON DVDRW LDW-451S > start writing Lead-Out at LBA 1768336 (1AFB90h), lenght 0 blocks

    13:04:42 #29 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    13:04:43 #30 Text 0 File DVDR.cpp, Line 2256
    EndDAO: Last written address was 1768335

    13:05:17 #31 SCSI -1176 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x02
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x02

    13:05:17 #32 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09234000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    13:05:17 #33 CDR -1176 File ThreadedTransferInterface.cpp, Line 1708
    Session fixation error
    LITE-ON DVDRW LDW-451S\H1 T0

    13:05:17 #34 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708
    Could not perform end of Disc-at-once

    13:05:17 #35 Text 0 File DVDR.cpp, Line 2256
    EndDAO: Last written address was -1

    13:05:17 #36 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09234000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    13:05:17 #37 Phase 38 File APIProgress.cpp, Line 273
    Burn process failed at 2x (2,770 KB/s)

    13:05:17 #38 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    13:05:17 #39 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 29/08/2002 12:00:00
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.4.21, size=23436 bytes, created 17/12/2002 11:32:46
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
    File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 22/04/2005 00:14:00 (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    [21.12.2005]------------------------------------
    12:41:47 Robot error messages from:
    ====== *** NeroAPI, History File *** ======

  10. #10
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    well squeaker, having the burner as slave to the hard drive is not a good idea.
    what brand of media was that you used last?
    You'll need to update nero.
    package 1
    http://www.nero.com/nero6/enu/nero-up.php

    for starters

  11. #11
    Junior Member
    Junior Member

    Join Date
    Jun 2004
    Location
    uk
    Posts
    13

    Default

    Used Bulkpaq dvdr Blue Label
    Also have`nt changed any drives this how it came from manafacturer did have a dvd rom fitted at shop could they have done it and how do i alter it if needed
    thanks

  12. #12
    Junior Member
    Junior Member

    Join Date
    Jun 2004
    Location
    uk
    Posts
    13

    Default

    How do i change it only have basic knowlede on this subject
    thanks

  13. #13
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    there's a little more to come, don't worry for now.
    do the nero update, that's critical
    be looking for better media, ricoh is good in UK

  14. #14
    Junior Member
    Junior Member

    Join Date
    Jun 2004
    Location
    uk
    Posts
    13

    Default

    Thanks have now updated nero also could you tell me how to change cables on drives and what firmware version to download.
    Last edited by squeaker; 22 Dec 2005 at 04:36 PM

  15. #15
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    good news, there's new firmware and yours is way too old,
    might be a lot of the problem, however I would switch the cables,
    drives first before flashing.

    anyway download the newest one for your drive

    http://forum.rpc1.org/dl_firmware.php?download_id=1735

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. problems burning a dvd+r data disc!
    By dt34 in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 3
    Last Post: 6 Jul 2005, 10:45 AM
  2. Burning problems
    By Gain11 in forum Blank Media and Burning
    Replies: 1
    Last Post: 5 Jan 2005, 04:08 PM
  3. Problems burning a dvd to my external Pioneer 107D
    By rubberbandman in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 1
    Last Post: 16 Apr 2004, 01:50 AM
  4. Burning With Menus? Problems?
    By Scottybowwow in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 2
    Last Post: 24 Feb 2004, 12:37 AM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •