Page 1 of 2 12 LastLast
Showing results 1 to 15 of 17

Thread: Must love dogs

  1. #1
    Junior Member
    Junior Member

    Join Date
    Sep 2004
    Posts
    33

    Default Must love dogs

    i have tried to make backup of this movie but this is something i have never run across before---the file goes through dvdd and/or dvdfab and shrink but when the file is sent to nero i get a burn failure---power calibration error--- has anybody seen this before---there is nothing wrong with my drives and the prog are the most recent and they work on other disc just not this one---tried on different sys with same result

  2. #2
    Demigod of Digital Video
    LT. Columbo's Avatar
    Join Date
    Nov 2004
    Location
    Los Angeles, CA
    Posts
    10,671
    "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
    Columbo moments...
    "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
    "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
    (An Exercise In Fatality, 1974)



  3. #3
    Junior Member
    Junior Member

    Join Date
    Sep 2004
    Posts
    33

    Default

    heres the log

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 9:37:36 PM
    Nero API version: 5.5.10.56
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <_NEC DVD_RW ND-2510A> Version: 2.15 - HA 1 TA 0 - 5.5.10.56
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On
    DiskPeripheral : SAMSUNG SP1604N TM10 hpt3xx Port 2 ID 0 DMA: ?
    OtherPeripheral : HPT RCM DEVICE hpt3xx Port 2 ID 0 DMA: ?
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 767MB (785848kB)
    Free physical memory: 478MB (490492kB)
    Memory in use : 37 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Enabled (1)

    23.12.2005
    NeroAPI
    3:51:51 PM #1 Phase 112 File APIProgress.cpp, Line 224
    DVD-Video files reallocation started

    3:51:51 PM #2 Phase 114 File APIProgress.cpp, Line 224
    DVD-Video files reallocation completed (no file modified)

    3:51:51 PM #3 Phase 111 File APIProgress.cpp, Line 224
    DVD-Video files sorted

    3:51:51 PM #4 Text 0 File Reader.cpp, Line 115
    Reader running

    3:51:51 PM #5 Text 0 File Writer.cpp, Line 125
    Writer _NEC DVD_RW ND-2510A running

    3:51:51 PM #6 ISO9660GEN -11 File geniso.cpp, Line 4571
    First writeable address = 0 (0x00000000)

    3:51:51 PM #7 ISO9660GEN -11 File geniso.cpp, Line 4571
    First writeable address = 0 (0x00000000)

    3:51:51 PM #8 Text 0 File Burncd.cpp, Line 3773
    Turn on Disc-At-Once, using DVD media

    3:51:51 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 672
    Setup items (original item values)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original CD pos #0 + 2169296 (2169296) = #2169296/482:3.71
    relocatable, CD pos for caching/writing not required/required, no patch infos
    --------------------------------------------------------------

    3:51:53 PM #10 Text 0 File DlgWaitCD.cpp, Line 229
    Last possible write address on media: 2298495 (510:46.45)
    Last address to be written: 2169295 (482:03.70)

    3:51:53 PM #11 Text 0 File DlgWaitCD.cpp, Line 234
    Write in overburning mode: FALSE

    3:51:53 PM #12 Text 0 File DlgWaitCD.cpp, Line 1703
    Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
    Disc Manufacturer: RITEKG - 05
    Disc Application Code: 64, Disc Physical Code: 193

    3:51:53 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 824
    Prepare recorder _NEC DVD_RW ND-2510A for write in cue-sheet-DAO
    DAO infos:
    ==========
    MCN:
    TOCTYPE: 0x0 Session Closed, CD fixated
    Tracks 1 to 1:
    TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 148058112

    3:51:53 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 672
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original CD pos #0 + 2169296 (2169296) = #2169296/482:3.71
    relocatable, CD pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2169296 blocks [_NEC DVD_RW ND-2510A ]
    --------------------------------------------------------------

    3:51:55 PM #15 Phase 24 File APIProgress.cpp, Line 224
    Caching of files started

    3:51:55 PM #16 Phase 25 File APIProgress.cpp, Line 224
    Caching of files completed

    3:51:55 PM #17 Phase 36 File APIProgress.cpp, Line 224
    Burn process started at 4x (5,540 KB/s)

    3:51:55 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 1978
    Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

    3:51:55 PM #19 Text 0 File DVDR.cpp, Line 1323
    Recording mode: Sequential Recording Mode

    3:51:55 PM #20 Text 0 File Mmc.cpp, Line 19546
    Set BUFE: JustLink -> ON

    3:51:55 PM #21 Text 0 File DVDR.cpp, Line 1437
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    3:51:55 PM #22 Text 0 File Cdrdrv.cpp, Line 7933
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Media Specific:
    30 01 02 04 06 00 00 00 - 08 00 00 00 00 00 00 00 0...............
    02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    3:51:56 PM #23 Text 0 File Writer.cpp, Line 316
    15:51:56.942 - _NEC DVD_RW ND-2510A : Queue again later (Intervall : 11msec)

    3:52:08 PM #24 SCSI -1106 File Cdrdrv.cpp, Line 1447
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x01940000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x73 0x03

    3:52:08 PM #25 DVDR -1106 File Writer.cpp, Line 333
    Power calibration error

    3:52:08 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
    all writers idle, stopping conversion

    3:52:08 PM #27 Text 0 File ThreadedTransfer.cpp, Line 216
    conversion idle, stopping reader

    3:52:08 PM #28 Phase 38 File APIProgress.cpp, Line 224
    Burn process failed at 4x (5,540 KB/s)

    3:52:08 PM #29 Text 0 File Scsicmd.cpp, Line 406
    SCSI not using temporary buffers
    20 out of 20 temporary buffers allocated


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  4. #4
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    Your firmware's too old for that media,
    the new 2.18 should be your best bet.
    http://forum.rpc1.org/dl_firmware.php?download_id=1837

    the media has a spotty reputation
    http://www.videohelp.com/dvdmedia.ph...ITEKG05....%20

  5. #5
    Junior Member
    Junior Member

    Join Date
    Sep 2004
    Posts
    33

    Default

    are you refering to the ritek ridata disc that i use or something else because i have used only ritek for 2yrs now without one bad disc or bad burn and as i stated this is the first time this message has appeared

  6. #6
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    according to your log this is your media
    ritek g05, which haven't been around quite that long,
    you must have started with 4x media, ritek's
    quality has slipped in the last year.
    http://www.videohelp.com/dvdmedia.ph...=2803#comments

    another possibility is your drive is wearing out or dirty, but we won't go there until
    you try the firmware update or some older media with a better track record
    Last edited by Chewy; 24 Dec 2005 at 08:58 AM

  7. #7
    Demigod of Digital Video
    LT. Columbo's Avatar
    Join Date
    Nov 2004
    Location
    Los Angeles, CA
    Posts
    10,671

    Default

    chewy is right, i posted a log a while ago showing how simply go5 ritek failed. other members reported the same, even on other forums. try to get better media such as sony or verbatim.
    "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
    Columbo moments...
    "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
    "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
    (An Exercise In Fatality, 1974)



  8. #8
    Junior Member
    Junior Member

    Join Date
    Sep 2004
    Posts
    33

    Default

    according to you link i use ritek ridata which has a good rating down the line--and as i stated why would this error ocurr with only this movie tried another dvd after this one with no problem

  9. #9
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    variation within the spindle

    Price: $0.5 Purchased from: newegg.com
    Burnt with NEC ND-2510A at 4x using firmware 2.16.Burning reliability is Good.
    PC reliability is Good.
    DVD reliability is Good.
    Media color is Silver.
    Media text is Ridata 8x DVD_R.
    Media package type is Cake Box. Number of discs 50.
    Media made in Taiwan.
    Authoring/Burning comments:
    Decrypter, Shrink, Nero

    2 of these

  10. #10
    Junior Member
    Junior Member

    Join Date
    Sep 2004
    Posts
    33

    Default

    i quess what i am saying is that the nero failed to backup [must love dogs] but i used the same ritek disc in the same sys to backup [ex o er] with no error 1 hr later after decryt. and shrinking that dvd could there be something on/in the dvd folder causing this problem--- like i said this was the only problematic dvd

  11. #11
    Junior Member
    Junior Member

    Join Date
    Sep 2004
    Posts
    33

    Default

    my disc do come from new egg but in 100 cake and .28ea and i always burn at 1/2 the rated disc speed

  12. #12
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    might have been a glitch

  13. #13
    Junior Member
    Junior Member

    Join Date
    Sep 2004
    Posts
    33

    Default

    it is interesting that this glitch ocurred on 3 diff sys and only with this dvd--just wandering if so new type of prot. from warner bros.

  14. #14
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    if it gets thru shrink, it's usually good to go, as far as protection is concerned

  15. #15
    Junior Member
    Junior Member

    Join Date
    Sep 2004
    Posts
    33

    Default

    ok nice talking i post any other prob. i encounter

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Please Help Me, for the love of god
    By theastro3 in forum General Discussions
    Replies: 3
    Last Post: 16 Oct 2004, 11:57 PM
  2. I do love movies
    By simiboy in forum Off Topic
    Replies: 10
    Last Post: 2 Aug 2002, 11:24 AM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •