Announcement

**johnmw1** · 18 Jul 2006, 06:46 AM

Hi,

Just to let people know, that with your help my problem is now fixed.

Thanks for your replies.

John

**jmet** · 18 Jul 2006, 12:47 PM

Glad to hear it!

Good Job Chewy!

**Chewy** · 18 Jul 2006, 10:14 PM

Thanks jmet,
would you do me a favor, update post 1 in this thread to include a link to the clean tool and advise about downgrading from 6.6.1.4 to 6.6.018

**jmet** · 19 Jul 2006, 12:29 AM

Done chewy!

**Chewy** · 19 Jul 2006, 12:37 AM

U da mon! thanks

**snagel** · 9 Oct 2006, 05:18 AM

Is is better to run the General clean tool or the 6xxx if you currently have 6 series

**Chewy** · 9 Oct 2006, 05:44 AM

for updating, going to a higher number you don't need the clean tool, but
if nero's been up and running for some time it's not a bad idea to use the clean tool and start over. If you are downgrading from 6.6.1.4 definitely use the clean tool first.

**snagel** · 9 Oct 2006, 06:02 AM

Chewy, I've got 6.6.018 In the case of having it run for some time now. Should I run the General clean tool or the Nero 6 clean tool.

**Chewy** · 9 Oct 2006, 06:19 AM

sometimes I just reinstall the same version over itself, if it's glitching badly then I would run the 6 clean tool
uninstall from add and remove then run the clean tool then reboot

**curly clive** · 31 Oct 2006, 03:37 PM

hi, could some one PLEASE HELP ME, i have got 2 lg drives i have been burning with these drives for a while now well infact they are the only drives ive used and done me well till now,ive backed up many dvds in the last 2 years 1,500 to b precise,and ive always used nero with no problems, but i have got a problem my older off the 2 lg drives is burning fine with nero,but my other drive is not im getting a failed burn,and after trying different versions of nero i still had no luck with that drive, no in fact i did i got it to say successful burn but when i played it back, and tried it on my duplicator it was unrecognisable data (srange) tried other burning softwares still no luck so i thought it was my drive i took it back and got a new one, plug her in thinking everything would b fine still got the same problem, im very confused.
could some make any sense of this log please help many thanks

**jmet** · 31 Oct 2006, 03:38 PM

Where is the log curly?

**curly clive** · 31 Oct 2006, 03:40 PM

Originally Posted by jmet

Where is the log curly?

bear with me

**jmet** · 31 Oct 2006, 03:42 PM

take your time

**curly clive** · 31 Oct 2006, 03:50 PM

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero API version: 6.6.0.15
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 15e

Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : HDS722580VLAT20 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B D: CDRom0
HL-DT-ST DVDRAM GSA-H10N E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 63MB (65072kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

31.10.2006
NeroAPI
03:53:47 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

03:53:47 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

03:53:47 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

03:53:48 #4 Text 0 File Reader.cpp, Line 127
Reader running

03:53:48 #5 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10N running

03:53:48 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

03:53:48 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

03:53:48 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

03:53:48 #9 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media

03:53:49 #10 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286175 (508:02.25, 4465MB)

03:53:49 #11 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO

03:53:49 #12 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

03:53:49 #13 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

03:53:49 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286176 (2286176) = #2286176/508:2.26
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286176 blocks [HL-DT-ST DVDRAM GSA-H10N]
--------------------------------------------------------------

03:53:49 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682088448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286176 | lead-out | 1 | 0x41 | 0x00

03:53:50 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

03:53:50 #17 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.

03:53:50 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

03:53:50 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)

03:53:50 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

03:53:50 #21 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode for Multisession

03:53:50 #22 Text 0 File Mmc.cpp, Line 21627
Set BUFE: Buffer underrun protection -> ON

03:53:50 #23 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: No

03:53:50 #24 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

03:54:10 #25 SCSI -1194 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0A927400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x32 0x38 0x03 0x0C 0x73 0x04

03:54:15 #26 SCSI -1064 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0DF80000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x2A 0x00 0x00 0x0C 0x21 0x02

03:54:15 #27 CDR -1194 File Writer.cpp, Line 311
PMA update failure
HL-DT-ST DVDRAM GSA-H10N\H1 T1

03:54:15 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

03:54:15 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

03:54:15 #30 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was 31

03:54:17 #31 Phase 133 File APIProgress.cpp, Line 276
Writing short lead-out

03:54:18 #32 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x5B 0x01 0x00 0x0C 0x72 0x04

03:54:18 #33 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error

03:54:18 #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

03:54:18 #35 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)

03:54:18 #36 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

03:54:18 #37 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security

**cynthia** · 31 Oct 2006, 04:03 PM

That errorcode is very often firmware problem or/and that you burner don't like the media you are using.

Try to update your firmware:

http://forum.rpc1.org/dl_firmware.php?download_id=2238

Announcement

Download Nero version 6.6.0.18 Here!

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment