Announcement

Collapse
No announcement yet.

Nero error, with log. Yet another problem.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lateforwork2
    Junior Member
    Junior Member
    • Apr 2006
    • 5

    Nero error, with log. Yet another problem.

    Hey guys, I've been reading on here for quite a while now and just registered. Here's what I have.

    Soyo kt880 platinum
    amd 3200 xp
    1 gig corsair xms
    geforce 5200
    plextor 8x dvd burner

    Burning the movie Prime on TDK 4x media. Burning at 2.4. I've made sure to read up on the media quality so I can choose a little better next time. I'm down to my last tdk anyway. I have tried to enable when possible the DMA and I've also tried to re install nero. Im currently working on burning the image using dvdd.

    Here is my log so far: Any input would be greatly appreciated.

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 6/12/2003 11:04:10 PM
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
    NT-SPTI used
    Nero API version: 7.0.1.2
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: ahead\Nero - Burning Rom
    Internal Version: 7, 0, 1, 2
    Recorder: <PLEXTOR DVDR PX-708A> Version: 1.03 - HA 1 TA 0 - 7.0.1.2
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    === Scsi-Device-Map ===
    CdRomPeripheral : PLEXTOR DVDR PX-708A atapi Port 1 ID 0 DMA: Off
    DiskPeripheral : ST3200826AS 3.01 viasraid Port 2 ID 0 DMA: Off
    === CDRom-Device-Map ===
    PLEXTOR DVDR PX-708A E: CDRom0
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047344kB)
    Free physical memory: 538MB (551708kB)
    Memory in use : 47 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    4.4.2006
    NeroAPI
    10:40:33 PM #1 Phase 112 File APIProgress.cpp, Line 278
    DVD-Video files reallocation started

    10:40:33 PM #2 Phase 114 File APIProgress.cpp, Line 278
    DVD-Video files reallocation completed (no file modified)

    10:40:33 PM #3 Phase 111 File APIProgress.cpp, Line 278
    DVD-Video files sorted

    10:40:35 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 81920KB of Memory

    10:40:35 PM #5 Text 0 File Reader.cpp, Line 124
    Reader running

    10:40:35 PM #6 Text 0 File Writer.cpp, Line 113
    Writer E: PLEXTOR DVDR PX-708A running

    10:40:35 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    10:40:35 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    10:40:35 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    10:40:35 PM #10 Text 0 File Burncd.cpp, Line 3302
    Turn on Disc-At-Once, using DVD media

    10:47:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    10:47:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO

    10:47:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: PLEXTOR DVDR PX-708A, Media type: DVD+R

    10:47:43 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Compilation cannot be written on that medium type.
    (Medium in drive: DVD-ROM. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

    10:47:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [E: PLEXTOR DVDR PX-708A]
    --------------------------------------------------------------

    10:47:43 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: PLEXTOR DVDR PX-708A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286128 | lead-out | 1 | 0x41 | 0x00

    10:47:43 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    10:47:43 PM #18 Phase 24 File APIProgress.cpp, Line 278
    Caching of files started

    10:47:43 PM #19 Text 0 File Burncd.cpp, Line 4132
    Cache writing successful.

    10:47:43 PM #20 Phase 25 File APIProgress.cpp, Line 278
    Caching of files completed

    10:47:43 PM #21 Phase 36 File APIProgress.cpp, Line 278
    Burn process started at 2.4x (3,324 KB/s)

    10:47:43 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    10:47:43 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 323
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
    Buffer x00bd4200: Len x804

    10:47:43 PM #24 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:11:13 PM #25 SPTI -1135 File SCSIPassThrough.cpp, Line 323
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x07
    CDB Data: 0x2A 00 00 1C 32 20 00 00 20 00 00 00
    Sense Area: 0xF0 00 03 00 1F 32 20 0A 00 00 00 00 0C 07
    Buffer x01340000: Len x10000
    0x00 00 01 BA 45 F3 D6 87 D6 2D 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 00 00 72 41 F8 03 F8 31 76 22 88
    0x84 84 4C 87 E5 EE 7C 57 6E 28 61 CB 36 FF ED F7

    11:11:13 PM #26 CDR -1135 File Writer.cpp, Line 302
    Write error
    E: PLEXTOR DVDR PX-708A

    11:11:13 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:11:13 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    11:11:20 PM #29 SPTI -1093 File SCSIPassThrough.cpp, Line 323
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
    Sense Area: 0xF0 00 03 FF FF EE B0 0A 00 00 00 00 02

    11:11:44 PM #30 CDR -1093 File WriterStatus.cpp, Line 167
    No seek complete
    E: PLEXTOR DVDR PX-708A

    11:11:44 PM #31 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    11:11:44 PM #32 SPTI -1169 File SCSIPassThrough.cpp, Line 323
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x08
    CDB Data: 0x5A 00 05 00 00 00 00 00 48 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
    Buffer x01d7a400: Len x48

    11:11:45 PM #33 SPTI -1169 File SCSIPassThrough.cpp, Line 323
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x08
    CDB Data: 0x5A 00 05 00 00 00 00 00 48 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
    Buffer x01d7a400: Len x48

    11:11:45 PM #34 CDR -1169 File WriterStatus.cpp, Line 172
    Logical unit not ready, operation in progress
    E: PLEXTOR DVDR PX-708A

    11:11:45 PM #35 TRANSFER -39 File WriterStatus.cpp, Line 172
    Could not perform EndSession

    11:11:45 PM #36 Phase 38 File APIProgress.cpp, Line 278
    Burn process failed at 2.4x (3,324 KB/s)

    11:11:45 PM #37 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    11:11:45 PM #38 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.

    11:11:45 PM #39 SPTI -1169 File SCSIPassThrough.cpp, Line 323
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x08
    CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08

    11:11:45 PM #40 SPTI -1169 File SCSIPassThrough.cpp, Line 323
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x08
    CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08

    11:11:46 PM #41 SPTI -1169 File SCSIPassThrough.cpp, Line 323
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x04
    Sense Qual: 0x08
    CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08

    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 6/12/2003 11:04:10 PM
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
  • lateforwork2
    Junior Member
    Junior Member
    • Apr 2006
    • 5

    #2
    this is now the dvdd error. I guess it could all be due to DMA not being on...but I have it to "on when possible" Any other insight out there? Burn got to 66%.

    -Evan
    Attached Files

    Comment

    • cynthia
      Super Moderatress
      • Jan 2004
      • 14278

      #3
      Hi and welcome to the forum, lateforwork2!

      CdRomPeripheral : PLEXTOR DVDR PX-708A atapi Port 1 ID 0 DMA: Off
      You have it off.

      Comment

      • Chewy
        Super Moderator
        • Nov 2003
        • 18971

        #4
        1.03 firmware October 28, 2003



        8 versions later

        August 10, 2005

        Comment

        • lateforwork2
          Junior Member
          Junior Member
          • Apr 2006
          • 5

          #5
          whoa.....i guess I didnt see that I had a prob with the firmware. I guess just chugging along thus far with no problems, I figured that I'd be fine. I really appreciate the help with this guys, and thanks for a warm welcome to a noob.

          How do I change my DMA status on the drive? Device manager says its currently PIO mode, but DMA when possible. Any way to secure DMA?

          Comment

          • Chewy
            Super Moderator
            • Nov 2003
            • 18971

            #6
            Originally Posted by lateforwork2
            whoa.....i guess I didnt see that I had a prob with the firmware. I guess just chugging along thus far with no problems, I figured that I'd be fine.
            down to my last tdk anyway
            on TDK 4x media
            shame they don't make that anymore, some of those were very good media

            Comment

            • mill
              Im Off To See The Wizard
              • Oct 2005
              • 1105

              #7
              Originally Posted by cynthia
              Hi and welcome to the forum, lateforwork2!

              You have it off.
              I seen that too ,
              im learning lol

              but i dont see the mid code, is that because the drive does not reconize the media, or am i over looking it. Just learning
              Last edited by mill; 5 Apr 2006, 09:46 PM.
              Keep Plugin away

              Comment

              • lateforwork2
                Junior Member
                Junior Member
                • Apr 2006
                • 5

                #8
                Update for all of you. After updating the firmware, the drive is now able to be in DMA mode and its not stuck in PIO mode anymore. Thanks guys. I'll be trying a burn when I get some more media. I'm just trying to decide whether to buy online or not. Any good stores online?

                Comment

                • Chewy
                  Super Moderator
                  • Nov 2003
                  • 18971

                  #9
                  the only online economical media equivalent to those older tdk's is TY
                  dvd-r's. The local sales on verbatim 16x dvd+r are the way to go, unless you are lucky enough to find sony 8x dvd+r made in japan.

                  Comment

                  Working...
                  😀
                  🥰
                  🤢
                  😎
                  😡
                  👍
                  👎