Page 1 of 2 12 LastLast
Showing results 1 to 15 of 19

Thread: Burning problems

  1. #1
    Junior Member
    Junior Member

    Join Date
    Jul 2004
    Posts
    34

    Default Burning problems

    Hi i have been using nero forever but just got a new HP7170pc and am having all kinds of trouble burning

    the dvd burner is an HP DVD Writer 640c with Es04 firmware

    i just bought a pack of tayio Yuden printable dvd's(which are supposed to be top notch) and all iget is coasters

    I see there is a new firmware out for this burner but i don't know where to begin on how to do the firware upgrade(did one a while ago on older PC) and it was a nightmare

    anyway i checked and DMA is on,i also have dvdplus which came with the PC and imgburn installed ,this wouldn't be the problem would it.

    please help

  2. #2
    Demigod of Digital Video
    LT. Columbo's Avatar
    Join Date
    Nov 2004
    Location
    Los Angeles, CA
    Posts
    10,671
    "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
    Columbo moments...
    "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
    "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
    (An Exercise In Fatality, 1974)



  3. #3
    Digital Video Technician
    Digital Video Technician
    smkymntgrl's Avatar
    Join Date
    Feb 2005
    Location
    Illinois
    Posts
    449

    Default

    I'm no expert but I installed new firmware for my burner no problem. I used decrypter (tools>drive>check for firmware updates) it took me to the Firmware page, found my firmware and then followed the directions. I flashed mine in safe mode (just because I was paranoid) and had no problems. I was worried about doing it but it was quite easy. I was having trouble burning newer media ex. 16x when I had been using 8x. The firmware update seemed to do the trick.

    Smkymntgrl

    Check for Firmware Updates HERE.
    Read THIS to Find Out How to Find and Post Your Nero Log.
    READ the Golden Rules of Burning.


    Knowledge Speaks, But Wisdom Listens
    - Jimi Hendrix

  4. #4
    Junior Member
    Junior Member

    Join Date
    Jul 2004
    Posts
    34

    Default

    thanks guys

  5. #5
    Junior Member
    Junior Member

    Join Date
    Jul 2004
    Posts
    34

    Default

    Any other suggestions becuase after the firware upgrade i still can't burn anything

  6. #6
    Just Trying To Help soup's Avatar
    Join Date
    Nov 2005
    Location
    Canada Region 1
    Posts
    7,524

    Default

    Please post the log from your burn or if you used Dvd Decrypter in file mode, please post that log.


  7. #7
    Who Farted? locoeng's Avatar
    Join Date
    Dec 2005
    Location
    behind you
    Posts
    2,509

    Default

    Have you taken a look at these?

  8. #8
    Junior Member
    Junior Member

    Join Date
    Jul 2004
    Posts
    34

    Default

    @ locoeng

    thats where i have been reading for the past few hours trying to figure it out

    i am not sure where the log begins so here it goes

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 7:35:34 PM
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b

    Recorder: <HP DVD Writer 640c> Version: JS04 - HA 0 TA 0 - 6.6.0.16
    Adapter driver: <atapi> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <IDE-DVD DROM6216 >Version: HD07 - HA 0 TA 1 - 6.6.0.16
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    CdRomPeripheral : HP DVD Writer 640c atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : IDE-DVD DROM6216 atapi Port 0 ID 1 DMA: On
    DiskPeripheral : ST3250823AS atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    HP DVD Writer 640c E: CDRom0
    IDE-DVD DROM6216 F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1046952kB)
    Free physical memory: 560MB (574164kB)
    Memory in use : 45
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    9.4.2006
    UDF/ISO compilation
    6:59:47 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    6:59:47 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    6:59:47 PM #3 Text 0 File Isodoc.cpp, Line 6356
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    6:59:47 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    6:59:47 PM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    6:59:47 PM #6 Text 0 File Writer.cpp, Line 122
    Writer HP DVD Writer 640c running

    6:59:47 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    6:59:47 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    6:59:47 PM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    6:59:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286111 (508:01.36, 4465MB)

    6:59:47 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    6:59:47 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: HP DVD Writer 640c, Media type: DVD-R
    Disc Manufacturer: TYG02 -
    Disc Application Code: 64, Disc Physical Code: 193

    6:59:47 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    6:59:47 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HP DVD Writer 640c]
    --------------------------------------------------------------

    6:59:47 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [HP DVD Writer 640c] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286112 | lead-out | 1 | 0x41 | 0x00

    6:59:48 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    6:59:48 PM #17 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    6:59:48 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    6:59:48 PM #19 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 8x (11,080 KB/s)

    7:00:03 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    7:00:03 PM #21 Text 0 File DVDR.cpp, Line 2379
    Recording mode: Sequential Recording Mode

    7:00:03 PM #22 Text 0 File Mmc.cpp, Line 21708
    Set BUFE: Buffer underrun protection -> ON

    7:00:03 PM #23 Text 0 File DVDR.cpp, Line 2534
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:00:03 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    7:08:43 PM #25 Text 0 File WriterStatus.cpp, Line 116
    <HP DVD Writer 640c > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

    7:08:43 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    7:08:43 PM #27 Text 0 File DVDR.cpp, Line 2774
    EndDAO: Last written address was 2286111

    7:09:35 PM #28 Phase 33 File dlgbrnst.cpp, Line 1832
    Simulation completed successfully at 8x (11,080 KB/s)

    7:09:36 PM #29 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 8x (11,080 KB/s)

    7:09:36 PM #30 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    7:09:36 PM #31 Text 0 File DVDR.cpp, Line 2379
    Recording mode: Sequential Recording Mode

    7:09:36 PM #32 Text 0 File Mmc.cpp, Line 21708
    Set BUFE: Buffer underrun protection -> ON

    7:09:36 PM #33 Text 0 File DVDR.cpp, Line 2534
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:09:36 PM #34 Text 0 File Cdrdrv.cpp, Line 8862
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    7:24:08 PM #35 SCSI -1135 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x04430000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x1C 0x75 0x20 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
    0x00 0x00 0x00 0x00 0x0C 0x00

    7:24:08 PM #36 CDR -1135 File Writer.cpp, Line 311
    Write error

    7:24:08 PM #37 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    7:24:09 PM #38 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    7:24:09 PM #39 Text 0 File DVDR.cpp, Line 2774
    EndDAO: Last written address was 1864991

    7:24:09 PM #40 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 26/01/2005 12:03:00 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 10/08/2004 8:00:00 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======

    i also tried with imgburn and it also fails

  9. #9
    Who Farted? locoeng's Avatar
    Join Date
    Dec 2005
    Location
    behind you
    Posts
    2,509

    Default

    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286111 (508:01.36, 4465MB)
    Burning a bit too close to the edge, reset your target size to 4300 in either Recode or DVD Shrink, whichever you happen to be using.

    Simulation started at 8x (11,080 KB/s)
    Back your burn speed down to 4X until you get a good burn and then you can start stepping up the speed if you want.

    DVD high compatibility mode: Yes
    Turn off high compatability mode with the DVD-R's and see if you can get a successful burn.
    Nero Version: 6.6.0.16
    Better late than never, sorry just noticed this...try version 6.6.0.18 here

    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    An upgrade to the new Nero may fix this error, it means that your drive isn't seeing your media correctly...there should be more numbers here other than zeroes.

  10. #10
    Junior Member
    Junior Member

    Join Date
    Jul 2004
    Posts
    34

    Default

    Hi

    after trying all the above still couldn't get it to work so i reinstalled windows and know all seems good

    can there be a conflict with burning programs, i don't know if i want to put nero back on

  11. #11
    Demigod of Digital Video
    LT. Columbo's Avatar
    Join Date
    Nov 2004
    Location
    Los Angeles, CA
    Posts
    10,671

    Default

    try imgburn.
    "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
    Columbo moments...
    "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
    "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
    (An Exercise In Fatality, 1974)



  12. #12
    Junior Member
    Junior Member

    Join Date
    Jul 2004
    Posts
    34

    Default

    thanks i do use Imgburn for movies but was wondering about the other stuff(data) but i can try and use sonic MyDvd that came with the PC

  13. #13
    Junior Member
    Junior Member

    Join Date
    Jul 2004
    Posts
    34

    Default understanding Nero log

    Hi i posted in another thread that i was having a lot of trouble and in my log i was told by locoeng that this part of the log should have more then 0,s

    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    anyway after trying so many different things i took the pc back and they replaced the drive and everything seems to be working now but the new log looks like this

    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    does this seem better,should there be more numbers instead of the 0's ,don't really know what it means

    confused is all

    thanks

  14. #14
    Lord of Digital Video
    Lord of Digital Video
    Gary D's Avatar
    Join Date
    Dec 2005
    Location
    Canada-eh?
    Posts
    2,266

    Default

    Have you updated your Nero?

    Have you updated your firmware for your burner?

    What type of discs are these?

  15. #15
    Dithering old maid Miss Marple's Avatar
    Join Date
    Nov 2005
    Location
    St. Mary Mead
    Posts
    957

    Default

    Looks as you are using -R or -RW discs?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. problems by burning with Nero
    By janinasia in forum Nero Recode
    Replies: 1
    Last Post: 1 Mar 2006, 04:01 AM
  2. Problems burning with Nero
    By andrew2112 in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 44
    Last Post: 11 Nov 2005, 11:04 AM
  3. DVD Burning problems after upgrade to XP
    By daveywavey007 in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 5
    Last Post: 10 Oct 2005, 06:48 AM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •