software or hardware problem?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • raphster
    Junior Member
    Junior Member
    • Apr 2006
    • 5

    software or hardware problem?

    I'm having difficulty burning DVDs using my LITE-ON DVDRW SOHW-1633S.
    Where I can play only the first 10 seconds of each of the videos I burn to the disk. I have updated the firmware and still having problems. Also tried different media Verbatim 8x 4.7gb disks as well as Maxell 4x 4.7gb at various burn speeds and still no good.

    I got the following error log.


    ********** Nero Recode **********
    Version: 2.2.7.6
    Raphster

    0000-0010-0000-0000-0000-0000-0000 (serial 0 out)
    Project type: Remake a DVD
    Target size: DVD5 (2282925)
    23:26:29 File LangStreamPatcher.cpp, Line 56
    Command table patching started...
    23:26:29 File LangStreamPatcher.cpp, Line 135
    All tables successfully patched!
    Burn settings:
    Target: LITE-ON DVDRW SOHW-1633S
    Number of copies: 1
    Write speed: 5540 KB/s
    Temp folder: K: (213535391744 bytes free)
    Direct burning: false
    Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
    Shutdown when finished: false
    Advanced Analysis: false
    Compress Adaptive: false
    23:27:37 File burn_dvdfiles.cpp, Line 231
    Compile DVD: init
    VTS_01 Title Vobs [12491 vobus] 4010.67MB -> 2190.66MB [R 0.10]
    Video: 2020.12MB, extra: 170.54MB
    Audio: 1 streams
    0. 0. Dolby Digital 2-ch Unspecified 146.15MB [enabled]
    Subpicture: 0 streams
    VTS_02 Title Vobs [8384 vobus] 1836.91MB -> 1176.50MB [R 0.10]
    Video: 1061.87MB, extra: 114.63MB
    Audio: 1 streams
    0. 0. Dolby Digital 2-ch Unspecified 98.25MB [enabled]
    Subpicture: 0 streams
    VTS_03 Title Vobs [8315 vobus] 1819.47MB -> 1091.35MB [R 0.10]
    Video: 977.90MB, extra: 113.45MB
    Audio: 1 streams
    0. 0. Dolby Digital 2-ch Unspecified 97.21MB [enabled]
    Subpicture: 0 streams
    23:27:37 File burn_dvdfiles.cpp, Line 1152
    Compile DVD: begin copy 1
    23:27:38 File NeroRecorderBase.cpp, Line 506
    Writing to disc: D
    23:27:38 File NeroRecorderBase.cpp, Line 520
    Free capacity on disc: 2286459 sectors (2298496)
    23:27:38 File burn_dvdfiles.cpp, Line 479
    Compile DVD: burning 2286459 sectors (2282926 required)
    23:27:38 File burn_dvdfiles.cpp, Line 656
    Compile DVD: adjust target size to 4465.74MB (4465.74MB obtained)
    23:27:38 File burn_dvdfiles.cpp, Line 524
    Compiling DVD Volume started
    23:33:38 File NeroRecorder.cpp, Line 609
    Added extra file VTS_01_2.VOB
    23:38:41 File burn_dvdfiles.cpp, Line 1058
    Compile DVD: finished VTS_01 Title Vobs
    VTS_01 Title Vobs:
    Original 4010.67MB -> Expected 2194.57MB -> Output 2194.59MB
    Finished error 0.01MB
    Ratio encoded = 12491
    Original encoded = 0
    Slide encoded = 0
    StillImage encoded = 0
    Output extra size = 169.76MB
    Source video size = 3840.90MB
    Pictures Modified [I 12492] [P 49902] [B 124910]
    23:38:43 File NeroRecorder.cpp, Line 609
    Added extra file VTS_01_3.VOB
    23:45:00 File burn_dvdfiles.cpp, Line 1058
    Compile DVD: finished VTS_02 Title Vobs
    VTS_02 Title Vobs:
    Original 1836.91MB -> Expected 1177.92MB -> Output 1177.90MB
    Finished error 0.00MB
    Ratio encoded = 8384
    Original encoded = 0
    Slide encoded = 0
    StillImage encoded = 0
    Output extra size = 113.95MB
    Source video size = 1722.96MB
    Pictures Modified [I 8377] [P 33330] [B 83839]
    23:45:02 File NeroRecorder.cpp, Line 609
    Added extra file VTS_02_2.VOB
    23:51:07 File burn_dvdfiles.cpp, Line 1058
    Compile DVD: finished VTS_03 Title Vobs
    VTS_03 Title Vobs:
    Original 1819.47MB -> Expected 1092.92MB -> Output 1092.92MB
    Finished error -0.00MB
    Ratio encoded = 8315
    Original encoded = 0
    Slide encoded = 0
    StillImage encoded = 0
    Output extra size = 113.00MB
    Source video size = 1706.47MB
    Pictures Modified [I 8297] [P 33113] [B 83144]
    23:51:13 File NeroRecorder.cpp, Line 609
    Added extra file VTS_03_2.VOB
    23:51:17 File burn_dvdfiles.cpp, Line 547
    Compile DVD: completed successfuly (4465.74MB)
    23:51:17 File NeroRecorderBase.cpp, Line 1130
    Burning 15 files with total size of 4682665984 bytes on hard disk
    23:51:17 File burn_dvdfiles.cpp, Line 1152
    Compile DVD: begin copy 1
    0000-0010-0000-0000-0000-0000-0000

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero API version: 7.0.1.4
    Using interface version: 7.0.0.0
    Installed in: C:\Program Files\Nero\Nero 7\Core\
    Application: Ahead\Nero Recode
    Internal Version: 7, 0, 1, 4

    Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0Y - HA 1 TA 0 - 7.0.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD400BB-75JHC0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
    DiskPeripheral : IBM-DTLA-307015 atapi Port 1 ID 1 DMA: Off

    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-1633S D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1277MB (1308656kB)
    Free physical memory: 743MB (761784kB)
    Memory in use : 41
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    11.4.2006
    NeroAPI
    11:51:17 PM #1 Phase 112 File APIProgress.cpp, Line 278
    DVD-Video files reallocation started

    11:51:17 PM #2 Phase 114 File APIProgress.cpp, Line 278
    DVD-Video files reallocation completed (no file modified)

    11:51:17 PM #3 Phase 111 File APIProgress.cpp, Line 278
    DVD-Video files sorted

    11:51:17 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 81920KB of Memory

    11:51:17 PM #5 Text 0 File Reader.cpp, Line 124
    Reader running

    11:51:17 PM #6 Text 0 File Writer.cpp, Line 113
    Writer D: LITE-ON DVDRW SOHW-1633S running

    11:51:17 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    11:51:17 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    11:51:17 PM #9 Text 0 File Burncd.cpp, Line 3342
    Turn on Disc-At-Once, using DVD media

    11:51:18 PM #10 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2287007 (508:13.32, 4466MB)

    11:51:18 PM #11 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO (enabled: CD)

    11:51:18 PM #12 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
    Disc Manufacturer: Prodis - cS03
    Disc Application Code: 64, Disc Physical Code: 193

    11:51:18 PM #13 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:51:18 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2287008 (2287008) = #2287008/508:13.33
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287008 blocks [D: LITE-ON DVDRW SOHW-1633S]
    --------------------------------------------------------------

    11:51:18 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [D: LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4683792384, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2287008 | lead-out | 1 | 0x41 | 0x00

    11:51:18 PM #16 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    11:51:18 PM #17 Phase 24 File APIProgress.cpp, Line 278
    Caching of files started

    11:51:18 PM #18 Text 0 File Burncd.cpp, Line 4176
    Cache writing successful.

    11:51:18 PM #19 Phase 25 File APIProgress.cpp, Line 278
    Caching of files completed

    11:51:18 PM #20 Phase 36 File APIProgress.cpp, Line 278
    Burn process started at 4x (5,540 KB/s)

    11:51:18 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    11:51:18 PM #22 Text 0 File DVDR.cpp, Line 2580
    Recording mode: Sequential Recording Mode

    11:51:18 PM #23 Text 0 File MMC.cpp, Line 21611
    Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

    11:51:18 PM #24 Text 0 File DVDR.cpp, Line 2735
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:51:18 PM #25 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:51:46 PM #26 Text 0 File Cdrdrv.cpp, Line 1197
    23:51:46.296 - D: LITE-ON DVDRW SOHW-1633S : Queue again later

    11:55:29 PM #27 SPTI -1046 File SCSIPassThrough.cpp, Line 323
    D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 00 00 00 07 60 00 00 20 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
    Buffer x062a0000: Len x10000
    0x00 00 01 BA 44 00 B5 FB 45 D7 01 89 C3 F8 00 00
    0x01 BD 07 EC 80 80 05 21 00 2D D8 41 80 02 01 E4
    0xAC C7 D4 C9 DB 3B 03 6D CC 76 8D 55 52 4B AD 4E

    11:55:29 PM #28 CDR -1046 File Writer.cpp, Line 302
    Illegal disc
    D: LITE-ON DVDRW SOHW-1633S

    11:55:29 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:55:29 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    11:55:29 PM #31 Text 0 File DVDR.cpp, Line 2978
    EndDAO: Last written address was 1887

    11:55:30 PM #32 Phase 38 File APIProgress.cpp, Line 278
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 7:00:00 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    23:55:31 File NeroRecorderBase.cpp, Line 936
    Burn failed (3)
    23:55:31 File burn_dvdfiles.cpp, Line 301
    Compile DVD: exit
  • Trial by Fire
    Junior Member
    Junior Member
    • Apr 2006
    • 6

    #2
    Try this to see if the burner is okay. Download a free trial version of 1Click and then down load DVD43 (a decrypter). You can google for DVD43. Both are free. Put the DVD into the burner. A 'yellow smiley face' will be in your tool bar at the bottom. When it turns green you have decrypted the movie; then pull up 1Click and hit start. It places it on the HD, so you can burn it. Only problem is it doesn't put the title of the movie on the HD file; only says 1click file. Hope this helps.

    Comment

    • raphster
      Junior Member
      Junior Member
      • Apr 2006
      • 5

      #3
      thanks, I don't need to decrypt or rip a dvd. A friend made home DVD movies that I'm trying to copy. Other friends have done so successfuly, myself being the exception.

      Comment

      • Chewy
        Super Moderator
        • Nov 2003
        • 18971

        #4
        DiskPeripheral : IBM-DTLA-307015 atapi Port 1 ID 1 DMA: Off
        it should be slaved to the main hard drive and fix dma

        try using shrink to get a good rip to the hard drive and then nero to burn

        Comment

        • raphster
          Junior Member
          Junior Member
          • Apr 2006
          • 5

          #5
          I fixed the DMA and the VOB files are already on my hard drive and I tried to use Nero to burn and I'm still getting burn errors. New log attached. Please help, going through disks like toilet paper.

          ********** Nero Recode **********

          Version: 2.2.7.6

          Raphster



          Project type: Remake a DVD
          Target size: DVD5 (2282925)

          22:04:52 File LangStreamPatcher.cpp, Line 56
          Command table patching started...

          22:04:52 File LangStreamPatcher.cpp, Line 135
          All tables successfully patched!

          Burn settings:
          Target: LITE-ON DVDRW SOHW-1633S
          Number of copies: 1
          Write speed: 0 KB/s
          Temp folder: C:\Documents and Settings\Raphael\My Documents\Out video (12178018304 bytes free)
          Direct burning: false
          Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
          Shutdown when finished: false
          Advanced Analysis: false
          Compress Adaptive: false

          22:05:16 File burn_dvdfiles.cpp, Line 231
          Compile DVD: init

          VTS_01 Title Vobs [12491 vobus] 4010.67MB -> 2443.99MB [R 0.22]
          Video: 2273.44MB, extra: 170.54MB
          Audio: 1 streams
          0. 0. Dolby Digital 2-ch Unspecified 146.15MB [enabled]
          Subpicture: 0 streams

          VTS_02 Title Vobs [10383 vobus] 3330.87MB -> 2014.60MB [R 0.22]
          Video: 1873.49MB, extra: 141.11MB
          Audio: 1 streams
          0. 0. Dolby Digital 2-ch Unspecified 120.83MB [enabled]
          Subpicture: 0 streams

          22:05:16 File burn_dvdfiles.cpp, Line 1152
          Compile DVD: begin copy 1

          22:05:17 File NeroRecorderBase.cpp, Line 506
          Writing to disc: D

          22:05:17 File NeroRecorderBase.cpp, Line 520
          Free capacity on disc: 2286464 sectors (2298496)

          22:05:17 File burn_dvdfiles.cpp, Line 479
          Compile DVD: burning 2286464 sectors (2282925 required)

          22:05:17 File burn_dvdfiles.cpp, Line 656
          Compile DVD: adjust target size to 4465.75MB (4465.75MB obtained)

          22:05:17 File burn_dvdfiles.cpp, Line 524
          Compiling DVD Volume started

          22:09:41 File NeroRecorder.cpp, Line 609
          Added extra file VTS_01_2.VOB

          22:13:50 File NeroRecorder.cpp, Line 609
          Added extra file VTS_01_3.VOB

          22:15:09 File burn_dvdfiles.cpp, Line 1058
          Compile DVD: finished VTS_01 Title Vobs

          VTS_01 Title Vobs:
          Original 4010.67MB -> Expected 2447.74MB -> Output 2447.74MB
          Finished error 0.00MB
          Ratio encoded = 12491
          Original encoded = 0
          Slide encoded = 0
          StillImage encoded = 0
          Output extra size = 169.76MB
          Source video size = 3840.90MB
          Pictures Modified [I 12279] [P 44785] [B 124910]

          22:19:42 File NeroRecorder.cpp, Line 609
          Added extra file VTS_02_2.VOB

          22:23:35 File burn_dvdfiles.cpp, Line 1058
          Compile DVD: finished VTS_02 Title Vobs

          VTS_02 Title Vobs:
          Original 3330.87MB -> Expected 2017.75MB -> Output 2017.75MB
          Finished error 0.00MB
          Ratio encoded = 10383
          Original encoded = 0
          Slide encoded = 0
          StillImage encoded = 0
          Output extra size = 141.11MB
          Source video size = 3189.76MB
          Pictures Modified [I 10383] [P 41452] [B 103829]

          22:23:38 File burn_dvdfiles.cpp, Line 547
          Compile DVD: completed successfuly (4465.75MB)

          22:23:38 File NeroRecorderBase.cpp, Line 1130
          Burning 11 files with total size of 4682678272 bytes on hard disk

          22:23:38 File burn_dvdfiles.cpp, Line 1152
          Compile DVD: begin copy 1




          Windows XP 5.1

          IA32

          WinAspi: -

          ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM



          NT-SPTI used

          Nero API version: 7.0.1.4

          Using interface version: 7.0.0.0

          Installed in: C:\Program Files\Nero\Nero 7\Core\

          Application: Ahead\Nero Recode
          Internal Version: 7, 0, 1, 4


          Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0Y - HA 1 TA 0 - 7.0.1.4

          Adapter driver: <IDE> HA 1

          Drive buffer : 2048kB

          Bus Type : default (0) -> ATAPI, detected: ?



          === Scsi-Device-Map ===

          DiskPeripheral : WDC WD400BB-75JHC0 atapi Port 0 ID 0 DMA: On

          CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On



          === CDRom-Device-Map ===

          LITE-ON DVDRW SOHW-1633S D: CDRom0

          =======================



          AutoRun : 1

          Excluded drive IDs:

          WriteBufferSize: 83886080 (0) Byte

          ShowDrvBufStat : 0

          BUFE : 0

          Physical memory : 1277MB (1308656kB)

          Free physical memory: 564MB (577968kB)

          Memory in use : 55

          Uncached PFiles: 0x0

          Use Inquiry : 1

          Global Bus Type: default (0)

          Check supported media : Disabled (0)



          12.4.2006

          NeroAPI

          10:23:38 PM #1 Phase 112 File APIProgress.cpp, Line 278

          DVD-Video files reallocation started



          10:23:38 PM #2 Phase 114 File APIProgress.cpp, Line 278

          DVD-Video files reallocation completed (no file modified)



          10:23:38 PM #3 Phase 111 File APIProgress.cpp, Line 278

          DVD-Video files sorted



          10:23:38 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525

          ReadBuffer-Pipe got 262144KB of Memory



          10:23:38 PM #5 Text 0 File Reader.cpp, Line 124

          Reader running



          10:23:38 PM #6 Text 0 File Writer.cpp, Line 113

          Writer D: LITE-ON DVDRW SOHW-1633S running



          10:23:38 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3312

          First writeable address = 0 (0x00000000)



          10:23:38 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312

          First writeable address = 0 (0x00000000)



          10:23:38 PM #9 Text 0 File Burncd.cpp, Line 3342

          Turn on Disc-At-Once, using DVD media



          10:23:39 PM #10 Text 0 File DlgWaitCD.cpp, Line 279

          Last possible write address on media: 2298495 (510:46.45, 4489MB)

          Last address to be written: 2287007 (508:13.32, 4466MB)



          10:23:39 PM #11 Text 0 File DlgWaitCD.cpp, Line 291

          Write in overburning mode: NO (enabled: CD)



          10:23:39 PM #12 Text 0 File DlgWaitCD.cpp, Line 2578

          Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R

          Disc Manufacturer: MCC 02 - RG20

          Disc Application Code: 64, Disc Physical Code: 193



          10:23:39 PM #13 Text 0 File DlgWaitCD.cpp, Line 458

          >>> Protocol of DlgWaitCD activities: <<<

          =========================================



          10:23:39 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847

          Setup items (after recorder preparation)

          0: TRM_DATA_MODE1 ()

          2 indices, index0 (150) not provided

          original disc pos #0 + 2287008 (2287008) = #2287008/508:13.33

          relocatable, disc pos for caching/writing not required/ required, no patch infos

          -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287008 blocks [D: LITE-ON DVDRW SOHW-1633S]

          --------------------------------------------------------------



          10:23:39 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059

          Prepare recorder [D: LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO

          DAO infos:

          ==========

          MCN: ""

          TOCType: 0x00; Session Closed, disc fixated

          Tracks 1 to 1:

          1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4683792384, ISRC ""

          DAO layout:

          ===========

          __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___

          0 | lead-in | 0 | 0x41 | 0x00

          0 | 1 | 0 | 0x41 | 0x00

          0 | 1 | 1 | 0x41 | 0x00

          2287008 | lead-out | 1 | 0x41 | 0x00



          10:23:39 PM #16 Text 0 File SCSIPassThrough.cpp, Line 36

          SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME



          10:23:39 PM #17 Phase 24 File APIProgress.cpp, Line 278

          Caching of files started



          10:23:39 PM #18 Text 0 File Burncd.cpp, Line 4176

          Cache writing successful.



          10:23:39 PM #19 Phase 25 File APIProgress.cpp, Line 278

          Caching of files completed



          10:23:39 PM #20 Phase 36 File APIProgress.cpp, Line 278

          Burn process started at 8x (11,080 KB/s)



          10:23:39 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685

          Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0



          10:23:39 PM #22 Text 0 File DVDR.cpp, Line 2580

          Recording mode: Sequential Recording Mode



          10:23:39 PM #23 Text 0 File MMC.cpp, Line 21611

          Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON



          10:23:39 PM #24 Text 0 File DVDR.cpp, Line 2735

          Start write address at LBA 0

          DVD high compatibility mode: Yes



          10:23:39 PM #25 Text 0 File Cdrdrv.cpp, Line 8411

          ---- DVD Structure: Physical Format Information (00h) ----

          Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

          Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)

          Disc Size: 120 mm, Maximum Rate: <not specified> (F h)

          Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable

          Linear Density: 0,267 um/bit, Track Density: 0,74 um/track

          Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

          End Physical Sector Number of Data Area: 0 h

          End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)

          Data in Burst Cutting Area (BCA) does not exist

          Start sector number of the current Border-Out: 0 h

          Start sector number of the next Border-In: 0 h

          Media Specific [16..63]:

          00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

          00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

          00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................



          10:24:13 PM #26 Text 0 File Cdrdrv.cpp, Line 1197

          22:24:13.500 - D: LITE-ON DVDRW SOHW-1633S : Queue again later



          10:27:21 PM #27 SPTI -1046 File SCSIPassThrough.cpp, Line 323

          D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)

          Sense Key: 0x02 (KEY_NOT_READY)

          Sense Code: 0x30

          Sense Qual: 0x05

          CDB Data: 0x2A 00 00 00 16 E0 00 00 20 00 00 00

          Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05

          Buffer x05960000: Len x10000

          0x00 00 01 BA 44 02 5C BF 8E 45 01 89 C3 F8 00 00

          0x01 E0 07 EC 81 00 00 2D 46 25 28 E8 EE 1D B4 92

          0x6A C8 7C 05 6A 4E 3B C8 7E 1F E0 D2 52 7E 70 FB



          10:27:21 PM #28 CDR -1046 File Writer.cpp, Line 302

          Illegal disc

          D: LITE-ON DVDRW SOHW-1633S



          10:27:21 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228

          all writers idle, stopping conversion



          10:27:21 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222

          conversion idle, stopping reader



          10:27:21 PM #31 Text 0 File DVDR.cpp, Line 2978

          EndDAO: Last written address was 5855



          10:27:21 PM #32 Phase 38 File APIProgress.cpp, Line 278

          Burn process failed at 8x (11,080 KB/s)





          Existing drivers:

          File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM

          File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 7:00:00 PM (Prassi/Veritas driver for win 2K)



          Registry Keys:

          HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)




          22:27:22 File NeroRecorderBase.cpp, Line 936
          Burn failed (3)

          22:27:22 File burn_dvdfiles.cpp, Line 301
          Compile DVD: exit

          Comment

          • Chewy
            Super Moderator
            • Nov 2003
            • 18971

            #6
            A friend made home DVD movies that I'm trying to copy
            drop recode for this and you do need to rip so that the file can be checked
            before the burn
            illegal disk message when there shouldn't be one with that firmware and those blanks

            Comment

            Working...