Showing results 1 to 5 of 5

Thread: Dick and Jane, burn process failed Shrink & Nero

  1. #1
    Junior Member
    Junior Member
    insurancepi's Avatar
    Join Date
    Jul 2005
    Posts
    11

    Default Dick and Jane, burn process failed Shrink & Nero

    I need some help, I am using the latest version of DVD Fab to rip and have nad no problems. Then I use the latest version of Shrink with Nero, version 6.6.0.18 and get an error that reads Burn Process failed. I have a Pacific Digital burner and have ripped and burned many movies, however for some reason Nero is giving me an error. I have also tried ImgBurn and it also gives me an error. My log is below,

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/19/2004 11:41:48 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero API version: 6.6.0.18
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Internal Version: 6, 6, 0, 18e
    Recorder: <TOSHIBA CD/DVDW SD-R5372>Version: TU31 - HA 2 TA 0 - 6.6.0.18
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    === Scsi-Device-Map ===
    DiskPeripheral : HITACHI_DK23EB-40 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TEAC CD-W224E atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8081N atapi Port 1 ID 0 DMA: On
    === CDRom-Device-Map ===
    TEAC CD-W224E D: CDRom0
    HL-DT-ST DVD-ROM GDR8081N F: CDRom1
    TOSHIBA CD/DVDW SD-R5372 H: CDRom2
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523704kB)
    Free physical memory: 165MB (169816kB)
    Memory in use : 67 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    13.4.2006
    NeroAPI
    9:15:00 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    9:15:00 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    9:15:00 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    9:15:00 PM #4 Text 0 File Reader.cpp, Line 127
    Reader running

    9:15:00 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    9:15:00 PM #6 Text 0 File Writer.cpp, Line 122
    Writer TOSHIBA CD/DVDW SD-R5372 running

    9:15:00 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    9:15:00 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    9:15:00 PM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    9:15:01 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1381215 (306:56.15, 2697MB)

    9:15:01 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO

    9:15:01 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: TOSHIBA CD/DVDW SD-R5372, Media type: DVD+R
    Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 3

    9:15:01 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:15:01 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1381216 (1381216) = #1381216/306:56.16
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1381216 blocks [TOSHIBA CD/DVDW SD-R5372]
    --------------------------------------------------------------

    9:15:01 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [TOSHIBA CD/DVDW SD-R5372] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2828730368, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1381216 | lead-out | 1 | 0x41 | 0x00

    9:15:01 PM #16 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    9:15:01 PM #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    9:15:01 PM #18 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    9:15:01 PM #19 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 2.4x (3,324 KB/s)

    9:15:01 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:15:02 PM #21 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: CMC.MAG.
    Media type ID: E01
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
    23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    9:15:02 PM #22 Text 0 File DVDPlusRW.cpp, Line 659
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:15:15 PM #23 SCSI -1135 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00CC0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x02 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    9:15:15 PM #24 CDR -1135 File Writer.cpp, Line 311
    Write error

    9:15:15 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    9:15:15 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    9:15:15 PM #27 SCSI -1046 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    9:15:15 PM #28 SCSI -1046 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    9:15:15 PM #29 Phase 127 File APIProgress.cpp, Line 276
    Generating DVD high compatibility borders

    9:15:15 PM #30 Phase 129 File APIProgress.cpp, Line 276
    Generating DVD borders completed successfully

    9:15:15 PM #31 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 2.4x (3,324 KB/s)

    9:15:15 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    9:15:15 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.

    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/19/2004 11:41:48 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 5:02:00 AM (Prassi/Veritas driver for win 2K)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  2. #2
    Just Trying To Help soup's Avatar
    Join Date
    Nov 2005
    Location
    Canada Region 1
    Posts
    7,524

    Default

    Well this is just for starters. Your firmware is way out of date.

    http://forum.digital-digest.com/showthread.php?t=57993.

    Better media would be advisable.

    Disc Manufacturer ID: CMC.MAG.


  3. #3
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    http://forum.rpc1.org/dl_firmware.php?download_id=1971
    TU56

    but the drive may be dying anyway

  4. #4

  5. #5
    Consequence is a bigger word than you think, it's bigger than you or me dmanshead's Avatar
    Join Date
    Dec 2005
    Location
    USA
    Posts
    376

    Thumbs up my bet is on the media

    I'm not sure but given what you say it is the media you are using. I had about 400 of those discs work fine, or so I thoght, until I go to play them back. Then the 5th 100 pk gave me 3 good burns out of 40 before i took them back. I'm not sure of the brand you are using but the Media is crap! Here is the post where I came to the bottom of it: http://forum.digital-digest.com/showthread.php?t=63647 , there are links to DVDIdentifier and nero cd-dvd speed which are good tools to use. The reason I mentioned Brand is I have had those discs in Phillips, Memorex, and Imation, now that I think about it those Memorex (spindle from costco) had high rates of failures and I haven't bought anymore Phillips since that episode, These were long before I knew as much as I do now.
    As for Fun with Dick and Jane I'm watching my backup now, It had more PSL's than any other movie I have ever done and more fake and blank titles too (I just love Sony). I used DVDD along with the PSL2 plugin for PgcEdit, to rip it to my hard drive, Shrink to shrink it and ImgBurn to burn my ISO image. All onto fair media, and it works great. I'm trying to rid myself of all the fair media and from now on it will be only the High quality stuff for me.
    As for firmware I don't fully Understand all to it but I have had much better results since I have upgraded mine. As I said I am using fair media and my success rate has improved with it since I have upgraded it.
    If you have ImgBurn or DVDD on your computer just open one of them and right click on your burner and a drop down list will appear, click the check for firmware upgrade and it will tell you your current version and give you a list specifically designed for your burner. Be careful not to use the wrong one or you may have a useless piece of hardware.
    I see Les has responded to you and he has a wealth of info in his signature, these folks here are great for sharing thier Knowledge and i hope to help as well. Happy burning!
    If you use these forums you will not have to face that...
    Long Live Foamy!!!

    My burners Nec ND 3550A, Benq DQ60, Liteon SHW P6S, 2 Sony AW_Q170A's (free with my new system) and JLMS XJ-HD S.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. having problems with dick and jane
    By deckhead2 in forum Junior Members/Newbies
    Replies: 5
    Last Post: 14 Apr 2006, 08:28 AM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •