Showing results 1 to 5 of 5

Thread: Burner dying?

  1. #1
    Platinum Member
    Platinum Member

    Join Date
    Jul 2005
    Posts
    198

    Default Burner dying?

    Hi
    I have a NEC 1100 A updated to firmware NEC 1300A (with region reset and +/- capabilities) x2.4 x4

    Recently (within the same spindel of DVD+Rs verbatim 8x) I got a few random bad burns, NOW all of a sudden it will not burn faster than 2.4. In Nero it says its burning at 4x , near the end the time remaining resets itsself and the tie adds up to 2.4 burn speed. In DVDD it says 2.5x

    I have re-flashed the firmware but nothing changed...

    can i continue to use it at 2.4x or should i not trust the burns (short of watching every burned DVD and verifing every data dvd)

    and if it is dying what is a good DVD burner to get?
    I have a dell 4600 2.6 gHz, P4 HT, 1G DDR SDRAM


    Dr K

  2. #2
    King of Digital Video
    King of Digital Video
    NightTran's Avatar
    Join Date
    Aug 2005
    Location
    eastcoast, on the beach
    Posts
    4,224

    Default

    does your dma change back to pio mode?

  3. #3
    Digital Video Expert
    Digital Video Expert

    Join Date
    Aug 2005
    Location
    Bucks County, Pa
    Posts
    566

    Default

    I had the same problem with a plextor..
    slow read 2x slow write out of nowhere...

    checked my hardware in device manager[secondary channels] and somehow my burner jumped from enable DMA to PIO.....

    If that happened, un-install the burner, re-boot and let windows find it again..

    you may have to re-install Nero again if it doesn't find your new burner setting.

  4. #4
    Platinum Member
    Platinum Member

    Join Date
    Jul 2005
    Posts
    198

    Default

    no its still in DMA mode
    I uninstalled burner and restarted
    computer found burner
    same results
    will only burn at 2.4X

    I burned an ISO with DVD Decrypter and ran verify and it said it was good

    BUT

    in nero with verify:
    here is the LOG


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 8:06:00 AM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 6.6.1.4
    Internal Version: 6, 6, 1, 4d
    (Nero Express)
    Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 3 - 6.6.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8162B D: CDRom0
    _NEC DVD_RW ND-1300A E: CDRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047532kB)
    Free physical memory: 536MB (549348kB)
    Memory in use : 47 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    16.4.2006
    UDF/ISO compilation
    8:29:14 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
    DVD-Video files reallocation started

    8:29:14 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
    DVD-Video files reallocation completed (no file modified)

    8:29:14 PM #3 Text 0 File Isodoc.cpp, Line 6475
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Options : automatic
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    8:29:14 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
    DVD-Video files sorted

    8:29:14 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 81920KB of Memory

    8:29:14 PM #6 Text 0 File Reader.cpp, Line 124
    Reader running

    8:29:14 PM #7 Text 0 File Writer.cpp, Line 122
    Writer _NEC DVD_RW ND-1300A running

    8:29:14 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    8:29:14 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    8:29:14 PM #10 Text 0 File Burncd.cpp, Line 3305
    Turn on Disc-At-Once, using DVD media

    8:29:14 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2286159 (508:02.09, 4465MB)

    8:29:14 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    8:29:14 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
    Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R

    8:29:14 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    8:29:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [_NEC DVD_RW ND-1300A]
    --------------------------------------------------------------

    8:29:14 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682055680, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286160 | lead-out | 1 | 0x41 | 0x00

    8:29:14 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    8:29:14 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    8:29:14 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    8:29:14 PM #20 Text 0 File Burncd.cpp, Line 4145
    Cache writing successful.

    8:29:14 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    8:29:14 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 4x (5,540 KB/s)

    8:29:14 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    8:29:14 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 289
    E: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
    Buffer x0cb60600: Len x804

    8:29:14 PM #25 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:52:33 PM #26 Text 0 File WriterStatus.cpp, Line 116
    <_NEC DVD_RW ND-1300A > start writing Lead-Out at LBA 2286160 (22E250h), lenght 0 blocks

    8:52:33 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    8:52:54 PM #28 SPTI -1106 File SCSIPassThrough.cpp, Line 289
    E: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1106)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
    Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03

    8:52:54 PM #29 SPTI -1176 File SCSIPassThrough.cpp, Line 289
    E: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1176)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x03
    CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03

    8:52:54 PM #30 CDR -1176 File ThreadedTransferInterface.cpp, Line 1937
    Session fixation error
    E: _NEC DVD_RW ND-1300A

    8:52:54 PM #31 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937
    Could not perform end of Disc-at-once

    8:53:19 PM #32 Phase 127 File dlgbrnst.cpp, Line 1685
    Generating DVD high compatibility borders

    8:53:19 PM #33 Phase 129 File dlgbrnst.cpp, Line 1685
    Generating DVD borders completed successfully

    8:53:19 PM #34 Phase 38 File dlgbrnst.cpp, Line 1685
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 6:28:13 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    But the DVD made with Nero plays fine (i didn't watch it all the way through, but put it in and jumped around and played it and no pixels or freezes....)
    Last edited by Dr Klovernutz; 17 Apr 2006 at 10:59 AM

  5. #5
    Platinum Member
    Platinum Member

    Join Date
    Jul 2005
    Posts
    198

    Default

    help????

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. how many rips and burns from 1 dvd burner?
    By H@X in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 13
    Last Post: 10 Mar 2006, 06:58 PM
  2. Help With Sony DRX-800UL Burner Problem
    By MAXIMUS01CAN in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 9
    Last Post: 17 Jan 2006, 01:29 AM
  3. Is my DVD Burner losing its touch!?!?
    By BurningTorch in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 3
    Last Post: 27 Aug 2005, 03:23 PM
  4. Gettting terrable burns with new burner, have tried all fixes read here and still....
    By Dj Eclipse in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 21
    Last Post: 24 Jan 2005, 05:59 AM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •