Announcement

Collapse
No announcement yet.

Burner dying?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dr Klovernutz
    Platinum Member
    Platinum Member
    • Jul 2005
    • 198

    Burner dying?

    Hi
    I have a NEC 1100 A updated to firmware NEC 1300A (with region reset and +/- capabilities) x2.4 x4

    Recently (within the same spindel of DVD+Rs verbatim 8x) I got a few random bad burns, NOW all of a sudden it will not burn faster than 2.4. In Nero it says its burning at 4x , near the end the time remaining resets itsself and the tie adds up to 2.4 burn speed. In DVDD it says 2.5x

    I have re-flashed the firmware but nothing changed...

    can i continue to use it at 2.4x or should i not trust the burns (short of watching every burned DVD and verifing every data dvd)

    and if it is dying what is a good DVD burner to get?
    I have a dell 4600 2.6 gHz, P4 HT, 1G DDR SDRAM


    Dr K
  • NightTran
    King of Digital Video
    King of Digital Video
    • Aug 2005
    • 4224

    #2
    does your dma change back to pio mode?
    sigpic

    Comment

    • rago88
      Digital Video Expert
      Digital Video Expert
      • Aug 2005
      • 566

      #3
      I had the same problem with a plextor..
      slow read 2x slow write out of nowhere...

      checked my hardware in device manager[secondary channels] and somehow my burner jumped from enable DMA to PIO.....

      If that happened, un-install the burner, re-boot and let windows find it again..

      you may have to re-install Nero again if it doesn't find your new burner setting.

      Comment

      • Dr Klovernutz
        Platinum Member
        Platinum Member
        • Jul 2005
        • 198

        #4
        no its still in DMA mode
        I uninstalled burner and restarted
        computer found burner
        same results
        will only burn at 2.4X

        I burned an ISO with DVD Decrypter and ran verify and it said it was good

        BUT

        in nero with verify:
        here is the LOG


        Windows XP 5.1
        IA32
        WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 8:06:00 AM
        ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

        NT-SPTI used
        Nero Version: 6.6.1.4
        Internal Version: 6, 6, 1, 4d
        (Nero Express)
        Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 3 - 6.6.1.4
        Adapter driver: <IDE> HA 1
        Drive buffer : 2048kB
        Bus Type : default (0) -> ATAPI, detected: ?
        CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 6.6.1.4
        Adapter driver: <IDE> HA 1

        === Scsi-Device-Map ===
        DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 0 DMA: On
        CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 0 DMA: On
        CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On

        === CDRom-Device-Map ===
        HL-DT-ST DVD-ROM GDR8162B D: CDRom0
        _NEC DVD_RW ND-1300A E: CDRom3
        =======================

        AutoRun : 1
        Excluded drive IDs:
        WriteBufferSize: 83886080 (0) Byte
        ShowDrvBufStat : 0
        BUFE : 0
        Physical memory : 1022MB (1047532kB)
        Free physical memory: 536MB (549348kB)
        Memory in use : 47 %
        Uncached PFiles: 0x0
        Use Inquiry : 1
        Global Bus Type: default (0)
        Check supported media : Disabled (0)

        16.4.2006
        UDF/ISO compilation
        8:29:14 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
        DVD-Video files reallocation started

        8:29:14 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
        DVD-Video files reallocation completed (no file modified)

        8:29:14 PM #3 Text 0 File Isodoc.cpp, Line 6475
        UDF document burn settings
        ------------------------------------------
        Determine maximum speed : FALSE
        Simulate : FALSE
        Write : TRUE
        Finalize CD : TRUE
        Multisession : FALSE
        Burning mode : DAO
        Mode : 1
        UDF Mode : UDF/ISO bridge
        UDF Options : automatic
        UDF Revision : 1.02
        UDF Partition Type : physical
        ISO Level : 1 (Max. of 11 = 8 + 3 char)
        Character set : ISO 9660
        Joliet : FALSE
        Allow pathdepth more than 8 directories : FALSE
        Allow more than 255 characters in path : FALSE
        Write ISO9660 ;1 file extensions : TRUE

        8:29:14 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
        DVD-Video files sorted

        8:29:14 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
        ReadBuffer-Pipe got 81920KB of Memory

        8:29:14 PM #6 Text 0 File Reader.cpp, Line 124
        Reader running

        8:29:14 PM #7 Text 0 File Writer.cpp, Line 122
        Writer _NEC DVD_RW ND-1300A running

        8:29:14 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
        First writeable address = 0 (0x00000000)

        8:29:14 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
        First writeable address = 0 (0x00000000)

        8:29:14 PM #10 Text 0 File Burncd.cpp, Line 3305
        Turn on Disc-At-Once, using DVD media

        8:29:14 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
        Last possible write address on media: 2295103 (510:01.28, 4482MB)
        Last address to be written: 2286159 (508:02.09, 4465MB)

        8:29:14 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
        Write in overburning mode: NO (enabled: CD)

        8:29:14 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
        Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R

        8:29:14 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
        >>> Protocol of DlgWaitCD activities: <<<
        =========================================

        8:29:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
        Setup items (after recorder preparation)
        0: TRM_DATA_MODE1 ()
        2 indices, index0 (150) not provided
        original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10
        relocatable, disc pos for caching/writing not required/ required, no patch infos
        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [_NEC DVD_RW ND-1300A]
        --------------------------------------------------------------

        8:29:14 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
        Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
        DAO infos:
        ==========
        MCN: ""
        TOCType: 0x00; Session Closed, disc fixated
        Tracks 1 to 1:
        1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682055680, ISRC ""
        DAO layout:
        ===========
        __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
        0 | lead-in | 0 | 0x41 | 0x00
        0 | 1 | 0 | 0x41 | 0x00
        0 | 1 | 1 | 0x41 | 0x00
        2286160 | lead-out | 1 | 0x41 | 0x00

        8:29:14 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
        SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

        8:29:14 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
        SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

        8:29:14 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
        Caching of files started

        8:29:14 PM #20 Text 0 File Burncd.cpp, Line 4145
        Cache writing successful.

        8:29:14 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
        Caching of files completed

        8:29:14 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
        Burn process started at 4x (5,540 KB/s)

        8:29:14 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
        Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

        8:29:14 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 289
        E: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1066)
        Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
        Sense Code: 0x24
        Sense Qual: 0x00
        CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
        Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
        Buffer x0cb60600: Len x804

        8:29:14 PM #25 Text 0 File DVDPlusRW.cpp, Line 666
        Start write address at LBA 0
        DVD high compatibility mode: Yes

        8:52:33 PM #26 Text 0 File WriterStatus.cpp, Line 116
        <_NEC DVD_RW ND-1300A > start writing Lead-Out at LBA 2286160 (22E250h), lenght 0 blocks

        8:52:33 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
        all writers idle, stopping conversion

        8:52:54 PM #28 SPTI -1106 File SCSIPassThrough.cpp, Line 289
        E: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1106)
        Sense Key: 0x03 (KEY_MEDIUM_ERROR)
        Sense Code: 0x73
        Sense Qual: 0x03
        CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
        Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03

        8:52:54 PM #29 SPTI -1176 File SCSIPassThrough.cpp, Line 289
        E: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1176)
        Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
        Sense Code: 0x72
        Sense Qual: 0x03
        CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00
        Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03

        8:52:54 PM #30 CDR -1176 File ThreadedTransferInterface.cpp, Line 1937
        Session fixation error
        E: _NEC DVD_RW ND-1300A

        8:52:54 PM #31 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937
        Could not perform end of Disc-at-once

        8:53:19 PM #32 Phase 127 File dlgbrnst.cpp, Line 1685
        Generating DVD high compatibility borders

        8:53:19 PM #33 Phase 129 File dlgbrnst.cpp, Line 1685
        Generating DVD borders completed successfully

        8:53:19 PM #34 Phase 38 File dlgbrnst.cpp, Line 1685
        Burn process failed at 4x (5,540 KB/s)


        Existing drivers:
        File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM
        File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 6:28:13 PM (Prassi/Veritas driver for win 2K)

        Registry Keys:
        HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


        But the DVD made with Nero plays fine (i didn't watch it all the way through, but put it in and jumped around and played it and no pixels or freezes....)
        Last edited by Dr Klovernutz; 17 Apr 2006, 09:59 AM.

        Comment

        • Dr Klovernutz
          Platinum Member
          Platinum Member
          • Jul 2005
          • 198

          #5
          help????

          Comment

          Working...
          😀
          🥰
          🤢
          😎
          😡
          👍
          👎