Announcement

Collapse
No announcement yet.

strange burn logs but succesful burns

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • floresdave
    results may vary
    • Mar 2006
    • 164

    strange burn logs but succesful burns

    here's my burn log succesful burn concerned about que again later had to delete 70 or so lines of queue again later commands for post to fit.

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <PIONEER DVD-RW DVR-111D>Version: 1.06 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2000kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder
    CD-ROM: <PIONEER DVD-RW DVR-111D>Version: 1.06 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1200AB-00CBA1 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVD-RW DVR-111D atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    PIONEER DVD-RW DVR-111D D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 66060288 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 447MB (458224kB)
    Free physical memory: 143MB (146844kB)
    Memory in use : 67 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.4.2006
    UDF/ISO compilation
    12:39:50 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    12:39:50 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    12:39:50 PM #3 Text 0 File Isodoc.cpp, Line 6359
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    12:39:50 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    12:39:50 PM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    12:39:50 PM #6 Text 0 File Writer.cpp, Line 122
    Writer PIONEER DVD-RW DVR-111D running

    12:39:50 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    12:39:50 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    12:39:50 PM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    12:39:51 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1592431 (353:52.31, 3110MB)

    12:39:51 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    12:39:51 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: PIONEER DVD-RW DVR-111D, Media type: DVD-R
    Disc Manufacturer: MJC ME -
    Disc Application Code: 64, Disc Physical Code: 193

    12:39:51 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:39:51 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1592432 (1592432) = #1592432/353:52.32
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1592432 blocks [PIONEER DVD-RW DVR-111D]
    --------------------------------------------------------------

    12:39:51 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [PIONEER DVD-RW DVR-111D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3261300736, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1592432 | lead-out | 1 | 0x41 | 0x00

    12:39:51 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    12:39:51 PM #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    12:39:51 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    12:39:51 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 8x (11,080 KB/s)

    12:39:51 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:39:51 PM #21 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    12:39:51 PM #22 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    12:39:51 PM #23 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:39:51 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    12:39:53 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
    12:39:53.375 - PIONEER DVD-RW DVR-111D\H1 T0 : Queue again later

    12:40:25 PM #26 Text 0 File Cdrdrv.cpp, Line 1288
    12:40:25.078 - PIONEER DVD-RW DVR-111D\H1 T0 : Queue again later

    12:40:25 PM #27 Text 0 File Cdrdrv.cpp, Line 1288
    12:40:25.109 - PIONEER DVD-RW DVR-111D\H1 T0 : Queue again later

    12:40:25 PM #28 Text 0 File Cdrdrv.cpp, Line 1288
    12:40:25.140 - PIONEER DVD-RW DVR-111D\H1 T0 : Queue again later


    12:40:28 PM #118 Text 0 File Cdrdrv.cpp, Line 1288
    12:40:28.812 - PIONEER DVD-RW DVR-111D\H1 T0 : Queue again later

    12:40:28 PM #119 Text 0 File Cdrdrv.cpp, Line 1288
    12:40:28.843 - PIONEER DVD-RW DVR-111D\H1 T0 : Queue again later

    12:40:28 PM #120 Text 0 File Cdrdrv.cpp, Line 1288
    12:40:28.937 - PIONEER DVD-RW DVR-111D\H1 T0 : Queue again later

    12:40:28 PM #121 Text 0 File Cdrdrv.cpp, Line 1288
    12:40:28.968 - PIONEER DVD-RW DVR-111D\H1 T0 : Queue again later

    12:40:29 PM #122 Text 0 File Cdrdrv.cpp, Line 1288
    12:40:29.000 - PIONEER DVD-RW DVR-111D\H1 T0 : Queue again later

    12:40:29 PM #123 Text 0 File Cdrdrv.cpp, Line 1288
    12:40:29.031 - PIONEER DVD-RW DVR-111D\H1 T0 : Queue again later

    12:40:29 PM #124 Text 0 File Cdrdrv.cpp, Line 1288
    12:40:29.062 - PIONEER DVD-RW DVR-111D\H1 T0 : Queue again later

    12:46:09 PM #125 Text 0 File WriterStatus.cpp, Line 116
    <PIONEER DVD-RW DVR-111D> start writing Lead-Out at LBA 1592432 (184C70h), lenght 0 blocks

    12:46:09 PM #126 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    12:46:09 PM #127 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was 1592431

    12:46:27 PM #128 Phase 37 File dlgbrnst.cpp, Line 1832
    Burn process completed successfully at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
  • floresdave
    results may vary
    • Mar 2006
    • 164

    #2
    I have changed my setup a little bit added another drive updated firmware. When burning with TS-H552U my burn log looks normal. When burning with pioneer DVR-111D Everything is the same except i get about 50+ lines of

    12:56:45 PM #77 Text 0 File Cdrdrv.cpp, Line 1288
    12:56:45.390 - PIONEER DVD-RW DVR-111D\H1 T0 : Queue again later
    But always a succesful burn. This burn i also borrowed some JVC media to experiment but usually use TDK and get same results.

    Also drive seems to run noisy likes it's working too hard. I know i could use some more ram on my system but don't think that's the problem. ANY ideas?

    succesful burning log with samsung drive
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US06 - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-RW DVR-111D>Version: 1.19 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1200AB-00CBA1 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVD-RW DVR-111D atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    PIONEER DVD-RW DVR-111D D: CDRom0
    TSSTcorp CD/DVDW TS-H552U E: CDRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 66060288 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 447MB (458224kB)
    Free physical memory: 106MB (109500kB)
    Memory in use : 76 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    1.6.2006
    UDF/ISO compilation
    11:34:27 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    11:34:27 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    11:34:27 AM #3 Text 0 File Isodoc.cpp, Line 6359
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    11:34:28 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    11:34:28 AM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    11:34:28 AM #6 Text 0 File Writer.cpp, Line 122
    Writer TSSTcorp CD/DVDW TS-H552U running

    11:34:28 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    11:34:28 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    11:34:28 AM #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    11:34:28 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286367 (508:04.67, 4465MB)

    11:34:28 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    11:34:28 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
    Disc Manufacturer: MJC ME -
    Disc Application Code: 64, Disc Physical Code: 193

    11:34:28 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:34:28 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286368 (2286368) = #2286368/508:4.68
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286368 blocks [TSSTcorp CD/DVDW TS-H552U]
    --------------------------------------------------------------

    11:34:36 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682481664, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286368 | lead-out | 1 | 0x41 | 0x00

    11:34:36 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    11:34:36 AM #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    11:34:36 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    11:34:36 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    11:34:36 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    11:34:36 AM #21 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    11:34:36 AM #22 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Super Link -> ON

    11:34:36 AM #23 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:34:36 AM #24 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:34:50 AM #25 Text 0 File Cdrdrv.cpp, Line 1288
    11:34:50.406 - TSSTcorp CD/DVDW TS-H552U\H1 T1 : Queue again later

    11:49:08 AM #26 Text 0 File WriterStatus.cpp, Line 116
    <TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 2286368 (22E320h), lenght 0 blocks

    11:49:08 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:49:08 AM #28 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was 2286367

    11:49:24 AM #29 Phase 37 File dlgbrnst.cpp, Line 1832
    Burn process completed successfully at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    Comment

    • Chewy
      Super Moderator
      • Nov 2003
      • 18971

      #3
      that media is kind of flackey but anyway update your firmware
      it's been out a whole day!


      not sure your version of nero likes the pioneer

      Comment

      • floresdave
        results may vary
        • Mar 2006
        • 164

        #4
        thanks chewy yeah i used cd speed with my TS burner perfect arc on transfer rate.
        Here is what happened with my pioneer on both media's. TDK went pretty smooth but JVC is all over the place. But like i said it was textbook example with samsung burner. I would just use samsung burner but it's no spring chicken (300 burns). I guess i will try nero 6.6.1.4 and burn manually unless you suggest an earlier version. thanks again.
        Attached Files

        Comment

        • Chewy
          Super Moderator
          • Nov 2003
          • 18971

          #5
          I guess i will try nero 6.6.1.4 and burn manually unless you suggest an earlier version. thanks again.
          that my friend is a very good decision and makes me want to buy another nec 3550 and benq 1650 since they love the more stable version of nero.
          My only bug with the 6.6.14 was with Copy on the Fly.

          the new pioneer firmware might fix a lot also

          btw I have seen some awfully good burns with those new pioneers
          Last edited by Chewy; 2 Jun 2006, 05:12 AM.

          Comment

          • floresdave
            results may vary
            • Mar 2006
            • 164

            #6
            i keep trying to download firmware and it says target not found. Went to Pioneer website and they have version 1.19 as the latest update for my drive(the version i am using). Every other firmware i have installed pretty much guided me through it and the most i would have to do is verify what drive i wanted to update. Should i be suspicous about this update?

            btw: It boiled down to me buying either the nec 3550 or this pioneer 111D. The sales guy sold me on the pioneer. The nec 3550 was and is 5 dollars cheaper there.($48). It sounds like it would be a good idea to pick one up for later when these burners hit the graveyard.
            Last edited by floresdave; 3 Jun 2006, 04:46 AM.

            Comment

            • Chewy
              Super Moderator
              • Nov 2003
              • 18971

              #7
              nevermind, I was looking at the older log, you are fine.
              1.19 is what you should be using

              try some better media

              Comment

              • floresdave
                results may vary
                • Mar 2006
                • 164

                #8
                Nero CD/DVD speed won't allow me to do a transfer rate test or even a quality test on my new verbatim+r media. It says that it is not capable with this type of disc and i should create a data disc if i wanted to run a test on this disc.
                I'm wondering if this is really a problem with my drive and not the system and if buying a Benq or NEC burner will help or is there something deeper any thoughts.

                Here is the media info and a screen shot to show that it will not allow me to start tests if this helps. thanks in advance.
                Attached Files

                Comment

                • Chewy
                  Super Moderator
                  • Nov 2003
                  • 18971

                  #9
                  You can't scan or do a transfer test with a blank dvd and cdspeed
                  some sort of plex tool might

                  Comment

                  • floresdave
                    results may vary
                    • Mar 2006
                    • 164

                    #10
                    duh. that makes sense. i created on data disc it was all over the place. It's funny i should just be happy i'm getting succesful burns., but i strive for perfection.

                    Comment

                    • Chewy
                      Super Moderator
                      • Nov 2003
                      • 18971

                      #11
                      you just need to burn good enough to have a margin of error for disk wear and tear and a little degradation from age

                      scanning can give you pickitis but that beats burning a lot of disks all over again

                      Comment

                      Working...
                      😀
                      🥰
                      🤢
                      😎
                      😡
                      👍
                      👎