Page 1 of 4 123 ... LastLast
Showing results 1 to 15 of 50

Thread: help! illegal disc error???

  1. #1
    Junior Member
    Junior Member

    Join Date
    May 2006
    Posts
    15

    Default help! illegal disc error???

    I have been copying dvd's with dvd fab decrypter, dvd shrink and burning with nero. I had just copied a movie yesterday and everything went fine. When I opened a new pack of blank dvds(fuji) up i received a message saying illegal disk burn failed. I tried another pack of disks(fuji) and same problem. So I thought I had a bad set of dvds. I bought 4 new packs of Sony DVD-r that I usually use and I am still getting the message below.

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 7:33:44 PM
    Nero API version: 6.3.1.20
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 3 TA 0 - 6.3.1.20
    Adapter driver: <atapi> HA 3
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder
    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : Memorex DVD+/-DLRWL1 F16 atapi Port 3 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B atapi Port 3 ID 1 DMA: On
    === CDRom-Device-Map ===
    Memorex DVD+/-DLRWL1 F16 D: CDRom0
    HL-DT-ST DVD-ROM GDR8161 E: CDRom1
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 38797312 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 238MB (244460kB)
    Free physical memory: 50MB (51784kB)
    Memory in use : 78 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    11.5.2006
    NeroAPI
    12:47:43 AM #1 Phase 112 File APIProgress.cpp, Line 273
    DVD-Video files reallocation started

    12:47:43 AM #2 Phase 114 File APIProgress.cpp, Line 273
    DVD-Video files reallocation completed (no file modified)

    12:47:43 AM #3 Phase 111 File APIProgress.cpp, Line 273
    DVD-Video files sorted

    12:47:44 AM #4 Text 0 File Reader.cpp, Line 126
    Reader running

    12:47:44 AM #5 Text 0 File Writer.cpp, Line 124
    Writer Memorex DVD+/-DLRWL1 F16 running

    12:47:44 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    12:47:44 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    12:47:44 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    12:47:44 AM #9 Text 0 File Burncd.cpp, Line 3173
    Turn on Disc-At-Once, using DVD media

    12:47:44 AM #10 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    12:47:44 AM #11 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO

    12:47:44 AM #12 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    12:47:44 AM #13 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:47:44 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [Memorex DVD+/-DLRWL1 F16]
    --------------------------------------------------------------

    12:47:44 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286128 | lead-out | 1 | 0x00 | 0x41

    12:47:48 AM #16 Phase 24 File APIProgress.cpp, Line 273
    Caching of files started

    12:47:48 AM #17 Text 0 File Burncd.cpp, Line 4183
    Cache writing successful.

    12:47:48 AM #18 Phase 25 File APIProgress.cpp, Line 273
    Caching of files completed

    12:47:48 AM #19 Phase 36 File APIProgress.cpp, Line 273
    Burn process started at 4x (5,540 KB/s)

    12:47:48 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    12:47:48 AM #21 Text 0 File DVDR.cpp, Line 1942
    Recording mode: Sequential Recording Mode

    12:47:48 AM #22 Text 0 File Mmc.cpp, Line 20513
    Set BUFE: supported -> ON , Generic write control : ON

    12:47:48 AM #23 Text 0 File DVDR.cpp, Line 2083
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:47:48 AM #24 Text 0 File Cdrdrv.cpp, Line 8128
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    12:48:02 AM #25 SCSI -1046 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x00C60000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    12:48:02 AM #26 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    12:48:02 AM #27 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    12:48:02 AM #28 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    12:48:02 AM #29 Text 0 File DVDR.cpp, Line 2325
    EndDAO: Last written address was -1

    12:48:02 AM #30 Phase 38 File APIProgress.cpp, Line 273
    Burn process failed at 4x (5,540 KB/s)

    12:48:02 AM #31 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    12:48:02 AM #32 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.

    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.35, size=23420 bytes, created 10/3/2002 8:00:12 PM
    File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 7/16/2004 4:53:14 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 7/16/2004 4:53:54 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 7/16/2004 4:57:12 PM (InCD4 driver for win NT/2K/XP)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    I have had no trouble in the past year except in my decrypter I switched from dvd decrypter to dvd fab and have had no problems. any ideas please help. i know the process of how to burn but not details so please explain it for me.

  2. #2
    Queen of Digital Video
    Queen of Digital Video
    photo_angel2004's Avatar
    Join Date
    Jan 2004
    Location
    Middle Earth USA
    Posts
    3,558

    Default




    Nero API version: 6.3.1.20
    Using interface version: 6.3.1.4
    This version of Nero is know to be problimatic with shrink.
    Solution.





    Alos upgrade your firmware:

    http://forum.rpc1.org/dl_firmware.php?download_id=1925
    Last edited by photo_angel2004; 11 May 2006 at 03:22 PM

  3. #3
    Consequence is a bigger word than you think, it's bigger than you or me dmanshead's Avatar
    Join Date
    Dec 2005
    Location
    USA
    Posts
    376

    Default

    The best advice is use ImgBurn, and use nero for the other types of burning you need to do. I have less coasters made with ImgBurn than nero, mainly because ImgBurn just burns and does not try to "think" about what it burning.
    If you use these forums you will not have to face that...
    Long Live Foamy!!!

    My burners Nec ND 3550A, Benq DQ60, Liteon SHW P6S, 2 Sony AW_Q170A's (free with my new system) and JLMS XJ-HD S.

  4. #4
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    This will be a very complicated fix, there's a lot wrong and if you want to use 16x -R media then it's going to get rather hairy.

    The burner will have to crossflash over to a liteon 1633S then crossflash over to a 1653S for you to burn those mid's.

    As 16x media replaces 8x on the shelves we will be seeing a lot more of this.

    If you have been using 16x media all along then your burner may be dying, but as this media just started hitting the shelves the last few months?
    Attached Files Attached Files
    Last edited by Chewy; 11 May 2006 at 09:25 PM

  5. #5
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    I just posted over at cdfreaks and they said you should be able to directly flash to the new firmware

    http://codeguys.rpc1.org/firmwares/d...d-cf-mcled.rar

    get winrar then unpack, boot into safe mode and update your firmware, if the burner is still good the illegal disk should disappear, there's a couple of other fixes also but let's do this one step at a time

  6. #6
    Junior Member
    Junior Member

    Join Date
    Jun 2006
    Posts
    1

    Default

    I have the same problem with nero...can anyone tell me whats wrong or what I need to do...and if it is the firmware how exactly do u use that thing

    Owner

    Nero Serial Removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM
    Nero version: 6.3.1.17 (Nero Express)
    Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BGS4 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BGS4 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4

    === Scsi-Device-Map ===
    CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 4 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8483B atapi Port 4 ID 1 DMA: Off
    DiskPeripheral : ST3160021A atapi Port 5 ID 0 DMA: On

    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-1633S E: CDRom0
    HL-DT-ST CD-ROM GCR-8483 F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 57671680 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 382MB (391664kB)
    Free physical memory: 96MB (98716kB)
    Memory in use : 74 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    11.6.2006
    UDF/ISO compilation
    11:48:01 AM #1 Phase 112 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation started

    11:48:01 AM #2 Text 0 File DVDVideoCompilation.cpp, Line 543
    Content of VIDEO_TS.IFO has been modified

    11:48:01 AM #3 Text 0 File DVDVideoCompilation.cpp, Line 543
    Content of VIDEO_TS.BUP has been modified

    11:48:01 AM #4 Phase 113 File dlgbrnst.cpp, Line 1845
    DVD-Video files reallocation completed

    11:48:01 AM #5 Text 0 File Isodoc.cpp, Line 6065
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    11:48:01 AM #6 Phase 111 File dlgbrnst.cpp, Line 1845
    DVD-Video files sorted

    11:48:01 AM #7 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x09CF4000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    11:48:01 AM #8 Text 0 File Reader.cpp, Line 118
    Reader running

    11:48:01 AM #9 Text 0 File Writer.cpp, Line 124
    Writer LITE-ON DVDRW SOHW-1633S running

    11:48:01 AM #10 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    11:48:01 AM #11 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    11:48:01 AM #12 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-at-once, using DVD media

    11:48:26 AM #13 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2074063 (460:54.13, 4050MB)

    11:48:26 AM #14 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO (enabled: CD)

    11:48:26 AM #15 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
    Disc Manufacturer: RITEKF - 1
    Disc Application Code: 64, Disc Physical Code: 193

    11:48:26 AM #16 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:48:26 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2074064 (2074064) = #2074064/460:54.14
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2074064 blocks [LITE-ON DVDRW SOHW-1633S]
    --------------------------------------------------------------

    11:48:26 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4247683072, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2074064 | lead-out | 1 | 0x00 | 0x41

    11:48:26 AM #19 Phase 24 File dlgbrnst.cpp, Line 1845
    Caching of files started

    11:48:26 AM #20 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    11:48:26 AM #21 Phase 25 File dlgbrnst.cpp, Line 1845
    Caching of files completed

    11:48:26 AM #22 Phase 36 File dlgbrnst.cpp, Line 1845
    Burn process started at 4x (5,540 KB/s)

    11:48:26 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    11:48:26 AM #24 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 12:53,722 (773722ms) -> OK

    11:48:27 AM #25 Text 0 File DVDR.cpp, Line 1876
    Recording mode: Sequential Recording Mode

    11:48:27 AM #26 Text 0 File Mmc.cpp, Line 20394
    Set BUFE: supported -> ON , SMART-BURN : ON

    11:48:27 AM #27 Text 0 File DVDR.cpp, Line 2017
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:48:27 AM #28 Text 0 File Cdrdrv.cpp, Line 8120
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:48:27 AM #29 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x09D16000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    11:48:33 AM #30 SCSI -1046 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x05F00000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    11:48:33 AM #31 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    11:48:33 AM #32 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    11:48:34 AM #33 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    11:48:34 AM #34 Text 0 File DVDR.cpp, Line 2253
    EndDAO: Last written address was -1

    11:48:34 AM #35 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x09CF3000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    11:48:34 AM #36 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    11:48:34 AM #37 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    11:48:34 AM #38 Phase 38 File dlgbrnst.cpp, Line 1845
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 9:07:32 PM
    File 'Drivers\CDRALW2K.SYS': Ver=7.5.0.50 , size=24960 bytes, created 9/7/2005 2:32:58 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 3:28:13 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  7. #7
    Who Farted? locoeng's Avatar
    Join Date
    Dec 2005
    Location
    behind you
    Posts
    2,509

    Default

    @pg86

    Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BGS4 - HA 4 TA 0 - 6.3.1.17
    Upgrade to 6.6.0.18 here

    Also current version of firmware is BSOY

    CdRomPeripheral : HL-DT-ST CD-ROM GCR-8483B atapi Port 4 ID 1 DMA: Off
    DMA should be enabled for all drives, turn DMA on for this device.

    Physical memory : 382MB (391664kB)
    Free physical memory: 96MB (98716kB)
    Memory in use : 74 %
    Running a little low on resources, no multitasking.


    File 'Drivers\CDRALW2K.SYS': Ver=7.5.0.50 , size=24960 bytes, created 9/7/2005 2:32:58 PM
    This is Roxio's own evil driver, it causes conflicts all over the place on a PC...especially with Nero. I would suggest removing it via Roxio Zap


    "I refuse to have a battle of wits with an unarmed person. It's not fair to you and no challenge for us."
    Walt Kelly

  8. #8
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    http://www.liteonit.com/DOWNLOADS/OD...e/DR16BS0Y.zip

    good link

    download, extract and boot int0o safe mode apply the firmware(no disks in drive)

  9. #9
    Who Farted? locoeng's Avatar
    Join Date
    Dec 2005
    Location
    behind you
    Posts
    2,509

    Default

    @supermanscott

    You also have a lot of drivers that create conflict....

    File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.35, size=23420 bytes, created 10/3/2002 8:00:12 PM
    File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 7/16/2004 4:53:14 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 7/16/2004 4:53:54 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 7/16/2004 4:57:12 PM (InCD4 driver for win NT/2K/XP)

    CDRAL is Roxio, bad news....remove via Roxio Zap

    InCD is Nero's own devil driver, I would also remove this one too via Nero Clean Tool


    "I refuse to have a battle of wits with an unarmed person. It's not fair to you and no challenge for us."
    Walt Kelly

  10. #10
    Junior Member
    Junior Member

    Join Date
    Jun 2006
    Posts
    9

    Default

    Hello I'm having the same problem only using a Lite-On LDW-851S and Imation DVD-Rs I'm currently using Nero 6.6.1.4 and my firmware is version GS0P.

    Got any suggestions? For some reason I can't get the previous version of Nero from there site as suggested any where else I can get it at?

  11. #11
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    welcome to the forum

    Upgrade to 6.6.0.18 here
    post number 7, click on the here

  12. #12
    Junior Member
    Junior Member

    Join Date
    Jun 2006
    Posts
    9

    Default

    Thanks but I get the same error message as before. I should also like to note that I'm ripping a movie using DVDshrink, then running it through VobEdit then through Restream, finally through DVDAuthorGUI to add subtitles for it, normally I wouldn't have to run the file through Restream but I get an error if I don't.

    So could this be the cause of my problem? Perhaps I should upgrade to Nero 7 which version of 7 would you suggest?

  13. #13
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    the title of this thread is "Illegal disk error", is that your problem?

  14. #14
    Junior Member
    Junior Member

    Join Date
    Jun 2006
    Posts
    9

    Default

    Yeah I get an Illegal disc burning error when I try to burn my backup DVD with subtitles.

  15. #15
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    does the compilation play off the computer fine?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Illegal Disc Error, Found no Solution Yet
    By Sheltonboy in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 17
    Last Post: 10 May 2005, 02:53 PM
  2. More Illegal Disc Error Message with Nero
    By silot in forum DVD Blank Media, Burning, Recording Hardware
    Replies: 8
    Last Post: 23 Feb 2005, 08:11 PM

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •