Illegal Disc error

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • saidmz
    Junior Member
    Junior Member
    • May 2006
    • 6

    Illegal Disc error

    I am getting error message using this drive. here is the log file...




    Nero Serial Removed

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.5.4
    Internal Version: 7, 0, 5, 4

    Recorder: <_NEC DVD_RW ND-1300A> Version: 1.05 - HA 1 TA 1 - 7.0.5.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <_NEC DVD_RW ND-1300A >Version: 1.05 - HA 1 TA 1 - 7.0.5.4
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00GVC0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST CD-RW GCE-8400B E: CDRom0
    _NEC DVD_RW ND-1300A F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 36700160 (0) Byte
    BUFE : 0
    Physical memory : 223MB (228848kB)
    Free physical memory: 21MB (21844kB)
    Memory in use : 90 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.5.2006
    ISO compilation
    8:17:25 PM #1 Text 0 File Isodoc.cpp, Line 6414
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    8:17:48 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 35840KB of Memory

    8:17:48 PM #3 Text 0 File Reader.cpp, Line 124
    Reader running

    8:17:48 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    8:18:43 PM #5 Text 0 File Burncd.cpp, Line 3341
    Turn on Disc-At-Once, using DVD media

    8:18:51 PM #6 Text 0 File DlgWaitCD.cpp, Line 288
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2122655 (471:42.05, 4145MB)

    8:18:51 PM #7 Text 0 File DlgWaitCD.cpp, Line 300
    Write in overburning mode: NO (enabled: CD)

    8:18:51 PM #8 Text 0 File DlgWaitCD.cpp, Line 2699
    Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AE1
    Disc Application Code: 64, Disc Physical Code: 193

    8:18:51 PM #9 Text 0 File DlgWaitCD.cpp, Line 472
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    8:18:51 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2122656 (2122656) = #2122656/471:42.6
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2122656 blocks [F: _NEC DVD_RW ND-1300A]
    --------------------------------------------------------------

    8:18:51 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [F: _NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4347199488, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2122656 | lead-out | 1 | 0x41 | 0x00

    8:18:51 PM #12 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    8:18:51 PM #13 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    8:18:51 PM #14 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    8:18:52 PM #15 Text 0 File Burncd.cpp, Line 4175
    Cache writing successful.

    8:18:52 PM #16 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    8:18:52 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 2.4x (3,324 KB/s)

    8:18:52 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    8:18:52 PM #19 Text 0 File DVDR.cpp, Line 2699
    Recording mode: Sequential Recording Mode for Multisession

    8:18:52 PM #20 Text 0 File DVDR.cpp, Line 2855
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:18:52 PM #21 Text 0 File Cdrdrv.cpp, Line 8663
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 30 00 10 20 00 00 00 - 00 00 00 21 00 00 00 00 .0.........!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    8:18:52 PM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 290
    F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 00 00 00 00 00 20 63 A0 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

    8:18:52 PM #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
    Illegal disc
    F: _NEC DVD_RW ND-1300A

    8:18:52 PM #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
    Could not perform start of Disc-at-once

    8:18:52 PM #25 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 1/20/2006 6:46:33 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
  • LT. Columbo
    Demigod of Digital Video
    • Nov 2004
    • 10671

    #2
    how long have you been using nero 7?

    i'd do these 2 things first:

    1) update firmware to 1.0c. it's way out of date


    2) reduce memory usage

    Physical memory : 223MB (228848kB)
    Free physical memory: 21MB (21844kB)
    Memory in use : 90 %
    "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
    Columbo moments...
    "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
    "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
    (An Exercise In Fatality, 1974)


    Comment

    • saidmz
      Junior Member
      Junior Member
      • May 2006
      • 6

      #3
      its been just a couple months that i am using nero7. I dont have any problems buring CDs on my other drive using Nero7. But havent been able to burn a dvd on this other drive.

      i installed that program and cleared memory but still the same error.

      Comment

      • LT. Columbo
        Demigod of Digital Video
        • Nov 2004
        • 10671

        #4
        can you post the last burn log?
        "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
        Columbo moments...
        "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
        "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
        (An Exercise In Fatality, 1974)


        Comment

        • saidmz
          Junior Member
          Junior Member
          • May 2006
          • 6

          #5
          Windows XP 5.1
          IA32
          WinAspi: -
          ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

          NT-SPTI used
          Nero Version: 7.0.8.2
          Internal Version: 7, 0, 8, 2
          (Nero Express)
          Recorder: <_NEC DVD_RW ND-1300A> Version: 1.05 - HA 1 TA 1 - 7.0.8.2
          Adapter driver: <IDE> HA 1
          Drive buffer : 2048kB
          Bus Type : default (0) -> ATAPI, detected: ?
          CD-ROM: <HL-DT-ST CD-RW GCE-8400B >Version: 1.05 - HA 1 TA 0 - 7.0.8.2
          Adapter driver: <IDE> HA 1

          === Scsi-Device-Map ===
          DiskPeripheral : WDC WD1600JB-00GVC0 atapi Port 0 ID 0 DMA: On
          CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 0 DMA: On
          CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On

          === CDRom-Device-Map ===
          HL-DT-ST CD-RW GCE-8400B E: CDRom0
          _NEC DVD_RW ND-1300A F: CDRom1
          =======================

          AutoRun : 0
          Excluded drive IDs:
          WriteBufferSize: 36700160 (0) Byte
          BUFE : 0
          Physical memory : 223MB (228848kB)
          Free physical memory: 22MB (22708kB)
          Memory in use : 90 %
          Uncached PFiles: 0x0
          Use Inquiry : 1
          Global Bus Type: default (0)
          Check supported media : Disabled (0)

          28.5.2006
          UDF compilation
          7:19:00 PM #1 Text 0 File Isodoc.cpp, Line 6423
          UDF document burn settings
          ------------------------------------------
          Determine maximum speed : FALSE
          Simulate : FALSE
          Write : TRUE
          Finalize CD : TRUE
          Multisession : FALSE
          Burning mode : DAO
          Mode : 1
          UDF Mode : pure
          UDF Options : automatic
          UDF Revision : 1.02
          UDF Partition Type : physical

          7:19:00 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
          ReadBuffer-Pipe got 35840KB of Memory

          7:19:00 PM #3 Text 0 File Reader.cpp, Line 124
          Reader running

          7:19:00 PM #4 Text 0 File Burncd.cpp, Line 3353
          Turn on Disc-At-Once, using DVD media

          7:19:00 PM #5 Text 0 File DlgWaitCD.cpp, Line 289
          Last possible write address on media: 2298495 (510:46.45, 4489MB)
          Last address to be written: 2282815 (507:17.40, 4458MB)

          7:19:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 301
          Write in overburning mode: NO (enabled: CD)

          7:19:00 PM #7 Text 0 File DlgWaitCD.cpp, Line 2715
          Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
          Disc Manufacturer: CMC MA - G. AE1
          Disc Application Code: 64, Disc Physical Code: 193

          7:19:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 473
          >>> Protocol of DlgWaitCD activities: <<<
          =========================================

          7:19:00 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
          Setup items (after recorder preparation)
          0: TRM_DATA_MODE1 ()
          2 indices, index0 (150) not provided
          original disc pos #0 + 2282816 (2282816) = #2282816/507:17.41
          relocatable, disc pos for caching/writing not required/ required, no patch infos
          -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2282816 blocks [F: _NEC DVD_RW ND-1300A]
          --------------------------------------------------------------

          7:19:00 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
          Prepare recorder [F: _NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
          DAO infos:
          ==========
          MCN: ""
          TOCType: 0x00; Session Closed, disc fixated
          Tracks 1 to 1:
          1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4675207168, ISRC ""
          DAO layout:
          ===========
          __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
          0 | lead-in | 0 | 0x41 | 0x00
          0 | 1 | 0 | 0x41 | 0x00
          0 | 1 | 1 | 0x41 | 0x00
          2282816 | lead-out | 1 | 0x41 | 0x00

          7:19:00 PM #11 Text 0 File SCSIPassThrough.cpp, Line 39
          SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

          7:19:00 PM #12 Text 0 File SCSIPassThrough.cpp, Line 84
          SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

          7:19:01 PM #13 Phase 24 File dlgbrnst.cpp, Line 1730
          Caching of files started

          7:19:01 PM #14 Text 0 File Burncd.cpp, Line 4187
          Cache writing successful.

          7:19:01 PM #15 Phase 25 File dlgbrnst.cpp, Line 1730
          Caching of files completed

          7:19:01 PM #16 Phase 36 File dlgbrnst.cpp, Line 1730
          Burn process started at 2.4x (3,324 KB/s)

          7:19:01 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
          Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

          7:19:01 PM #18 Text 0 File DVDR.cpp, Line 2760
          Recording mode: Sequential Recording Mode

          7:19:01 PM #19 Text 0 File DVDR.cpp, Line 2916
          Start write address at LBA 0
          DVD high compatibility mode: Yes

          7:19:01 PM #20 Text 0 File Cdrdrv.cpp, Line 8661
          ---- DVD Structure: Physical Format Information (00h) ----
          Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
          Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
          Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
          Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
          Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
          Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
          End Physical Sector Number of Data Area: 26127F h
          End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
          Data in Burst Cutting Area (BCA) does not exist
          Start sector number of the current Border-Out: 2FE10 h
          Start sector number of the next Border-In: 2FFA0 h
          Media Specific [16..63]:
          00 30 00 10 20 00 00 00 - 00 00 00 21 00 00 00 00 .0.........!....
          00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
          00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

          7:19:01 PM #21 SPTI -1046 File SCSIPassThrough.cpp, Line 290
          F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
          Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
          Sense Code: 0x30
          Sense Qual: 0x05
          CDB Data: 0x53 00 00 00 00 00 22 D5 40 00 00 00
          Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

          7:19:01 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
          Illegal disc
          F: _NEC DVD_RW ND-1300A

          7:19:01 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
          Could not perform start of Disc-at-once

          7:19:01 PM #24 Phase 38 File dlgbrnst.cpp, Line 1730
          Burn process failed at 2.4x (3,324 KB/s)


          Existing drivers:
          File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 1/20/2006 6:46:33 PM (Prassi/Veritas driver for win 2K)

          Registry Keys:
          HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

          Comment

          • LT. Columbo
            Demigod of Digital Video
            • Nov 2004
            • 10671

            #6
            Originally Posted by saidmz
            i installed that program and cleared memory but still the same error.
            neither have been taken care of.
            "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
            Columbo moments...
            "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
            "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
            (An Exercise In Fatality, 1974)


            Comment

            • saidmz
              Junior Member
              Junior Member
              • May 2006
              • 6

              #7
              Windows XP 5.1
              IA32
              WinAspi: -
              ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

              NT-SPTI used
              Nero Version: 7.0.8.2
              Internal Version: 7, 0, 8, 2
              (Nero Express)
              Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0B - HA 1 TA 3 - 7.0.8.2
              Adapter driver: <IDE> HA 1
              Drive buffer : 2048kB
              Bus Type : default (0) -> ATAPI, detected: ?
              CD-ROM: <HL-DT-ST CD-RW GCE-8400B >Version: 1.05 - HA 1 TA 0 - 7.0.8.2
              Adapter driver: <IDE> HA 1

              === Scsi-Device-Map ===
              DiskPeripheral : WDC WD1600JB-00GVC0 atapi Port 0 ID 0 DMA: On
              CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 0 DMA: On
              CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On

              === CDRom-Device-Map ===
              HL-DT-ST CD-RW GCE-8400B E: CDRom0
              _NEC DVD_RW ND-1300A F: CDRom3
              =======================

              AutoRun : 0
              Excluded drive IDs:
              WriteBufferSize: 36700160 (0) Byte
              BUFE : 0
              Physical memory : 223MB (228848kB)
              Free physical memory: 38MB (39308kB)
              Memory in use : 82 %
              Uncached PFiles: 0x0
              Use Inquiry : 1
              Global Bus Type: default (0)
              Check supported media : Disabled (0)

              28.5.2006
              ISO compilation
              9:34:02 PM #1 Text 0 File Isodoc.cpp, Line 6423
              Iso document burn settings
              ------------------------------------------
              Determine maximum speed : FALSE
              Simulate : FALSE
              Write : TRUE
              Finalize CD : FALSE
              Multisession : TRUE
              Multisession type: : Start multisession
              Burning mode : DAO
              Mode : 1
              ISO Level : 1 (Max. of 11 = 8 + 3 char)
              Character set : ISO 9660
              Joliet : TRUE
              Allow pathdepth more than 8 directories : TRUE
              Allow more than 255 characters in path : TRUE
              Write ISO9660 ;1 file extensions : TRUE

              9:34:03 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
              ReadBuffer-Pipe got 35840KB of Memory

              9:34:03 PM #3 Text 0 File Reader.cpp, Line 124
              Reader running

              9:34:03 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312
              First writeable address = 0 (0x00000000)

              9:34:03 PM #5 Text 0 File Burncd.cpp, Line 3353
              Turn on Disc-At-Once, using DVD media

              9:34:03 PM #6 Text 0 File DlgWaitCD.cpp, Line 289
              Last possible write address on media: 2298495 (510:46.45, 4489MB)
              Last address to be written: 2028031 (450:40.31, 3960MB)

              9:34:03 PM #7 Text 0 File DlgWaitCD.cpp, Line 301
              Write in overburning mode: NO (enabled: CD)

              9:34:03 PM #8 Text 0 File DlgWaitCD.cpp, Line 2715
              Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
              Disc Manufacturer: RITEKF - 1
              Disc Application Code: 64, Disc Physical Code: 193

              9:34:03 PM #9 Text 0 File DlgWaitCD.cpp, Line 473
              >>> Protocol of DlgWaitCD activities: <<<
              =========================================

              9:34:03 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
              Setup items (after recorder preparation)
              0: TRM_DATA_MODE1 ()
              2 indices, index0 (150) not provided
              original disc pos #0 + 2028032 (2028032) = #2028032/450:40.32
              relocatable, disc pos for caching/writing not required/ required, no patch infos
              -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2028032 blocks [F: _NEC DVD_RW ND-1300A]
              --------------------------------------------------------------

              9:34:03 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
              Prepare recorder [F: _NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
              DAO infos:
              ==========
              MCN: ""
              TOCType: 0x00; Session Closed, disc not fixated
              Tracks 1 to 1:
              1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4153409536, ISRC ""
              DAO layout:
              ===========
              __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
              0 | lead-in | 0 | 0x41 | 0x00
              0 | 1 | 0 | 0x41 | 0x00
              0 | 1 | 1 | 0x41 | 0x00
              2028032 | lead-out | 1 | 0x41 | 0x00

              9:34:03 PM #12 Text 0 File SCSIPassThrough.cpp, Line 39
              SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

              9:34:03 PM #13 Text 0 File SCSIPassThrough.cpp, Line 84
              SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

              9:34:03 PM #14 Phase 24 File dlgbrnst.cpp, Line 1730
              Caching of files started

              9:34:03 PM #15 Text 0 File Burncd.cpp, Line 4187
              Cache writing successful.

              9:34:03 PM #16 Phase 25 File dlgbrnst.cpp, Line 1730
              Caching of files completed

              9:34:03 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730
              Burn process started at 2.4x (3,324 KB/s)

              9:34:03 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707
              Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

              9:34:03 PM #19 Text 0 File DVDR.cpp, Line 2760
              Recording mode: Sequential Recording Mode for Multisession

              9:34:03 PM #20 Text 0 File DVDR.cpp, Line 2916
              Start write address at LBA 0
              DVD high compatibility mode: Yes

              9:34:04 PM #21 Text 0 File Cdrdrv.cpp, Line 8661
              ---- DVD Structure: Physical Format Information (00h) ----
              Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
              Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
              Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
              Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
              Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
              Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
              End Physical Sector Number of Data Area: 26127F h
              End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
              Data in Burst Cutting Area (BCA) does not exist
              Start sector number of the current Border-Out: 2FE10 h
              Start sector number of the next Border-In: 2FFA0 h
              Media Specific [16..63]:
              00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
              00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
              00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

              9:34:04 PM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 290
              F: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046)
              Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
              Sense Code: 0x30
              Sense Qual: 0x05
              CDB Data: 0x53 00 00 00 00 00 1E F2 00 00 00 00
              Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

              9:34:04 PM #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
              Illegal disc
              F: _NEC DVD_RW ND-1300A

              9:34:04 PM #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
              Could not perform start of Disc-at-once

              9:34:04 PM #25 Phase 38 File dlgbrnst.cpp, Line 1730
              Burn process failed at 2.4x (3,324 KB/s)


              Existing drivers:
              File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 1/20/2006 6:46:33 PM (Prassi/Veritas driver for win 2K)

              Registry Keys:
              HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

              Comment

              • Chewy
                Super Moderator
                • Nov 2003
                • 18971

                #8
                your firmware is from mid 2003, those blanks weren't even conceived till much later.
                You might find some older 8x media to work with the last firmware 1.0C


                we are beating a dead horse here

                Comment

                • saidmz
                  Junior Member
                  Junior Member
                  • May 2006
                  • 6

                  #9
                  what do i do to make it work with the fujifilm 16x dvds ? can i upgrade the firmware any further?

                  Comment

                  • Chewy
                    Super Moderator
                    • Nov 2003
                    • 18971

                    #10
                    the newest firmware(2004-07-29) is too old.

                    Comment

                    • saidmz
                      Junior Member
                      Junior Member
                      • May 2006
                      • 6

                      #11
                      so you mean i cant upgrade any further?

                      Comment

                      • Chewy
                        Super Moderator
                        • Nov 2003
                        • 18971

                        #12
                        you can buy a new drive

                        Comment

                        Working...