Yes it's an illegal disc error.. with a difference!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rocket69
    Junior Member
    Junior Member
    • Jun 2006
    • 3

    Yes it's an illegal disc error.. with a difference!

    I recently bought a pack of 25 TDK DVD-R 1-16x speed single sided discs. I chose these as I've had a couple before that worked fine.

    I go to burn a new DVD of data (videos and pictures) and I get an illegal disc error! I'm new to this so I haven't a clue where to go.. Can any of you guys help? I'll post the error log if that helps.


    Ross Taylor
    Nero Serial Removed
    Nero Serial Removed
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:32
    Nero version: 6.6.0.5 (Nero Express)
    Recorder: <LITE-ON SOHW-1633S DVDRW>Version: BS0C - HA 2 TA 3 - 6.6.0.5
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HP cd16b CD-Writer>Version: 2.00 - HA 1 TA 1 - 6.6.0.5
    Adapter driver: <ATAPI>HA 1
    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 4D060H3 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG DVD-ROM SD-616F atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HP CD-Writer cd16b atapi Port 1 ID 1 DMA: On
    === CDRom-Device-Map ===
    SAMSUNG DVD-ROM SD-616F I: CDRom0
    HP CD-Writer cd16b J: CDRom1
    LITE-ON DVDRW SOHW-1633S K: CDRom2
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 767MB (785904kB)
    Free physical memory: 326MB (334256kB)
    Memory in use : 57 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    2.6.2006
    UDF compilation
    00:32:00 #1 Text 0 File Isodoc.cpp, Line 6168
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    00:32:00 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    00:32:00 #3 Text 0 File Writer.cpp, Line 122
    Writer LITE-ON DVDRW SOHW-1633S running

    00:32:00 #4 Text 0 File Burncd.cpp, Line 3155
    Turn on Disc-at-once, using DVD media

    00:32:22 #5 Text 0 File DlgWaitCD.cpp, Line 257
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1116521 (248:06.71, 2180MB)

    00:32:22 #6 Text 0 File DlgWaitCD.cpp, Line 269
    Write in overburning mode: NO (enabled: CD)

    00:32:22 #7 Text 0 File DlgWaitCD.cpp, Line 2310
    Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    00:32:22 #8 Text 0 File DlgWaitCD.cpp, Line 431
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

    00:32:22 #9 Text 0 File ThreadedTransferInterface.cpp, Line 829
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1116672 (1116672) = #1116672/248:8.72
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1116672 blocks [LITE-ON DVDRW SOHW-1633S]
    --------------------------------------------------------------

    00:32:22 #10 Text 0 File Burncd.cpp, Line 3749
    Can only write at 2x (2,770 KB/s) instead of 2.4x (3,324 KB/s) to current disc.

    00:32:22 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
    Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2286944256, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1116672 | lead-out | 1 | 0x41 | 0x00

    00:32:22 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    00:32:22 #13 Text 0 File Burncd.cpp, Line 4042
    Cache writing successful.

    00:32:22 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    00:32:22 #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2x (2,770 KB/s)

    00:32:22 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    00:32:22 #17 Text 0 File DVDR.cpp, Line 2260
    Recording mode: Sequential Recording Mode

    00:32:22 #18 Text 0 File Mmc.cpp, Line 21060
    Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

    00:32:22 #19 Text 0 File DVDR.cpp, Line 2401
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    00:32:22 #20 Text 0 File Cdrdrv.cpp, Line 8332
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <NOT specified>(F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    00:32:23 #21 SCSI -1046 File Cdrdrv.cpp, Line 1432
    SCSI Exec, HA 2, TA 3, LUN 0, buffer 0x0A510000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    00:32:23 #22 CDR -1046 File Writer.cpp, Line 311
    Illegal disc

    00:32:23 #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    00:32:23 #24 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    00:32:23 #25 Text 0 File DVDR.cpp, Line 2642
    EndDAO: Last written address was -1

    00:32:23 #26 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2x (2,770 KB/s)

    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 19/05/2004 09:11:06 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 23:59:44 (Adapter driver for src)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
  • Gary D
    Lord of Digital Video
    Lord of Digital Video
    • Dec 2005
    • 2266

    #2
    Your firmware for your burner is 4 generations old!

    Get the new firmware and directions here: http://forum.rpc1.org/dl_firmware.php?download_id=1934
    Gary D

    Comment

    • codajohn
      Digital Video Expert
      Digital Video Expert
      • Jul 2005
      • 661

      #3

      Your DVD drive firmware needes to be updated to BSOY version. Your firmware is very old. Try this first.


      Gary D you are fast!
      CJ
      My DVD Collection
      Register To Join Digital Video Forums


      Dell Inspiron 9100 Laptop, Windows XP Home SP 2 (build 2600), 2.80GH Pent 4, ST94811A 40GB HD, 2GB RAM, NEC DVD+RW ND-6100A 104D, ATI MOBILITY RADEON 9700, External 250GB Maxtor HD, External LG-5163D A105

      IBM ThinkCenter 8189, XP Pro, 3.2GH Pentium 4, 120 GB HD, 1GB Ram, BENQ DW1650 BCIC, Nvidia GeForce FX 5200, Generic floppy disk drive (3.5")

      The Golden Rules of Burning

      Comment

      • rocket69
        Junior Member
        Junior Member
        • Jun 2006
        • 3

        #4
        Thanks for this help guys, I really appreciate it but the link to the new firmware isn't there! I've only been able to update it too BSOH which hasn't done the trick unfortunately.

        Is there another link to this you could recommend?

        Would this work with other discs? Or is that a cheap way out?!?! I'm ready to pull my hair out!

        Comment

        • LT. Columbo
          Demigod of Digital Video
          • Nov 2004
          • 10671

          #5
          here is BSOY


          may want to update nero to 6.6.0.18 or 6.6.1.4 depending how/if you use dvd shrink
          "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
          Columbo moments...
          "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
          "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
          (An Exercise In Fatality, 1974)


          Comment

          • jamoskeag3
            Digital Video Master
            Digital Video Master
            • Nov 2005
            • 1327

            #6
            Did you try website for the burners manufacturer to see if they had firmware support.
            Now Columbo is too fast for me. Must be trend on this thread.

            Comment

            • rocket69
              Junior Member
              Junior Member
              • Jun 2006
              • 3

              #7
              Wow... You're all too fast for me! I thought I'd have this problem for weeks but thanks to you guys I've managed to fix it in minutes!!

              Thanks for all your help, I just burnt my first disk and it works fine!! Amazing!!

              I'll probably be back soon as I'm sure something else will go wrong... but for the mean time! Thanks!

              Comment

              • LT. Columbo
                Demigod of Digital Video
                • Nov 2004
                • 10671

                #8
                finally a quick fix and a happy ending. glad all of us could help

                remember it's one of the GROB
                "One day men will look back and say I gave birth to the 20th Century". Jack The Ripper - 1888
                Columbo moments...
                "Double Shock" "The Greenhouse Jungle" "Swan Song" FORUM RULES
                "You try to contrive a perfect alibi, and it's your perfect alibi that's gonna hang ya."
                (An Exercise In Fatality, 1974)


                Comment

                • jamoskeag3
                  Digital Video Master
                  Digital Video Master
                  • Nov 2005
                  • 1327

                  #9
                  Note that if you go past nero 6.6.0.18, later versions do not allow you to go auto from shrink to nero. See link below

                  Comment

                  • Chewy
                    Super Moderator
                    • Nov 2003
                    • 18971

                    #10
                    is it taking you 30 minutes or over an hour to burn a full dvd?

                    Comment

                    Working...