Page 1 of 2 12 LastLast
Showing results 1 to 15 of 18

Thread: Burns always fail validation with Nero

  1. #1
    Junior Member
    Junior Member

    Join Date
    Jun 2006
    Posts
    9

    Default Burns always fail validation with Nero

    Hi everyone,

    I've been researching my problem for weeks now, and I can't get any closer to a solution. I'm literally tearing my hair out.

    I built this PC at Xmas, and since then, I haven't been able to burn DVDs. I have a Pioneer DVR-111D drive, and use Nero. It is the latest version.

    Here is my error log, any help is much appreciated!

    Thanks.


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.70, size=45056 bytes, created 11/12/2001 14:31:26
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

    NT-SPTI used
    Nero Version: 6.6.1.4
    Internal Version: 6, 6, 1, 4d
    (Nero Express)
    Recorder:
    Version: 1.19 - HA 1 TA 3 - 6.6.1.4
    Adapter driver: <ide> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <qs0077w tys845x="">Version: 2.0B - HA 1 TA 1 - 6.6.1.4
    Adapter driver: <scsi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : IC35L120AVV207-0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST3200822A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-RW DVR-111D atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : QS0077W TYS845X 2.0B vaxscsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    PIONEER DVD-RW DVR-111D D: CDRom3
    QS0077W TYS845X G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 2046MB (2095536kB)
    Free physical memory: 1274MB (1305260kB)
    Memory in use : 37 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    5.6.2006
    ISO compilation
    21:34:01 #1 Text 0 File Isodoc.cpp, Line 6475
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    21:34:01 #2 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 262144KB of Memory

    21:34:01 #3 Text 0 File Reader.cpp, Line 124
    Reader running

    21:34:01 #4 Text 0 File Writer.cpp, Line 122
    Writer PIONEER DVD-RW DVR-111D running

    21:34:01 #5 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    21:34:01 #6 Text 0 File Burncd.cpp, Line 3305
    Turn on Disc-At-Once, using DVD media

    21:34:01 #7 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2234879 (496:38.29, 4364MB)

    21:34:01 #8 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    21:34:01 #9 Text 0 File DlgWaitCD.cpp, Line 2612
    Recorder: PIONEER DVD-RW DVR-111D, Media type: DVD+R
    Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
    Disc Application Code: 0, Extended Information Indicators: 7

    21:34:01 #10 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    21:34:01 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2234880 (2234880) = #2234880/496:38.30
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2234880 blocks [PIONEER DVD-RW DVR-111D]
    --------------------------------------------------------------

    21:34:01 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [PIONEER DVD-RW DVR-111D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4577034240, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2234880 | lead-out | 1 | 0x41 | 0x00

    21:34:01 #13 Text 0 File SCSIPassThrough.cpp, Line 38
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    21:34:01 #14 Text 0 File SCSIPassThrough.cpp, Line 83
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    21:34:01 #15 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    21:34:01 #16 Text 0 File Burncd.cpp, Line 4145
    Cache writing successful.

    21:34:01 #17 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    21:34:01 #18 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 12x (16,620 KB/s)

    21:34:01 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    21:34:02 #20 Text 0 File Cdrdrv.cpp, Line 8647
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified=""> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: R03
    Product revision number: 4
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
    23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    21:34:02 #21 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    21:34:09 #22 Text 0 File Cdrdrv.cpp, Line 1200
    21:34:09.750 - D: PIONEER DVD-RW DVR-111D : Queue again later

    === There's a load of the above, I had to snip them out ====

    21:41:18 #122 Text 0 File WriterStatus.cpp, Line 116

    start writing Lead-Out at LBA 2234880 (221A00h), lenght 0 blocks

    21:41:18 #123 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    21:42:01 #124 Phase 37 File dlgbrnst.cpp, Line 1685
    Burn process completed successfully at 12x (16,620 KB/s)

    21:42:01 #125 Phase 78 File dlgbrnst.cpp, Line 1685
    Data verification started

    21:48:31 #126 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    21:48:31 #127 SectorVerify 11 File Cdrdrv.cpp, Line 9771
    Sector 685430 on disc has different content to source

    21:48:31 #128 Phase 81 File dlgbrnst.cpp, Line 1685
    Data verification failed


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.70 built by: WinDDK, size=15360 bytes, created 11/12/2001 14:30:22
    File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 04/08/2004 06:59:41 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)</pioneer></not></scsi></qs0077w></ide></pioneer>

  2. #2
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    Just guessing off the top of my head, your virtual drive is hosing the verifcation and possibly the burn as well.
    You have 2 things also that you don't need, the aspi and scsiport.sys,
    both may have come with the drive emulation software, what was it?
    Last edited by Chewy; 6 Jun 2006 at 07:29 AM

  3. #3
    Junior Member
    Junior Member

    Join Date
    Jun 2006
    Posts
    9

    Default

    Hi,

    I use Alcohol 120% for drive Emulation, I will disable that feature and see if it helps.

    Thanks.

  4. #4
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    I tested the 2 latest versions of daemon tools last week, they seemed to be
    noninvasive on the aspi or spti levels

    when I see that aspi stuff anymore with windows xp I get concerned as most times it's lazy programming
    where someone's just patching their stuff to run on a newer system

    nero aspi for 6.6.0.18 and below stays in the nero folder and behaves itself, everybody else just
    let's theirs run rampant on the system

    slow burn speed down to 8x and skip verification and just check playability
    Last edited by Chewy; 6 Jun 2006 at 08:07 AM

  5. #5
    Junior Member
    Junior Member

    Join Date
    Jun 2006
    Posts
    9

    Default

    Ok, I uninstalled Alcohol, which got rid of all virtual drives.

    My burn still failed, however. Well, the burn was fine, but the data didn't match. Some of the files work, but some don't read properly, so something is going wrong somewhere.

    I managed to remove the aspi driver, and the two "existing drivers" at the bottom of the log, so it's not them.

    I get a lot of:

    00:49:53 #121 Text 0 File Cdrdrv.cpp, Line 1200
    00:49:53.500 - D: PIONEER DVD-RW DVR-111D : Queue again later

    Do you know what is causing this?

    Thanks again for your help.

    Edit: Is this the problem?

    Bus Type : default (0) -> ATAPI, detected: ?

    The question mark makes it look like it can't detect the ATAPI bus or whatever it is.

  6. #6
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    try reinstalling nero
    and use this tool to see the upper and lower filters

    http://www.bustrace.com/products/devfilter.htm

  7. #7
    Junior Member
    Junior Member

    Join Date
    Jun 2006
    Posts
    9

    Default

    I don't really understand this filter stuff, but from the images it looks like I need a Lower Class Filter, and I don't have one.

    So, er, how do I go about installing one?

    Cheers.

  8. #8
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    ----------------------------------------------------
    Filter Driver Load Order http://www.bustrace.com
    ----------------------------------------------------

    Upper Device Filter: redbook
    Device Object: HL-DT-ST DVDRAM GSA-4163B
    Lower Class Filter: ElbyCDFL
    Lower Device Filter: imapi

    Driver Name: redbook.sys
    File Location: c:\windows\system32\drivers
    File Description: Redbook Audio Filter Driver
    File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180]
    Product Name: Microsoft« Windows« Operating System
    Product Version: 5.1.2600.2180 [5.1.2600.2180]
    Company Name: Microsoft Corporation

    Driver Name: elbycdfl.sys
    File Location: c:\windows\system32\drivers
    File Description: ElbyCDIO Filter Driver
    File Version: 4, 2, 0, 0 [4.2.0.0]
    Product Name: CloneCD
    Product Version: 4, 2, 0, 0 [4.2.0.0]
    Company Name: Elaborate Bytes AG

    Driver Name: imapi.sys
    File Location: c:\windows\system32\drivers
    File Description: IMAPI Kernel Driver
    File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180]
    Product Name: Microsoft« Windows« Operating System
    Product Version: 5.1.2600.2180 [5.1.2600.2180]
    Company Name: Microsoft Corporation


    you don't need a lower class filter, filters can be bad

  9. #9
    Junior Member
    Junior Member

    Join Date
    Jun 2006
    Posts
    9

    Default

    ----------------------------------------------------
    Filter Driver Load Order http://www.bustrace.com
    ----------------------------------------------------

    Upper Class Filter: GEARAspiWDM
    Upper Device Filter: redbook
    Device Object: PIONEER DVD-RW DVR-111D
    Lower Device Filter: imapi

    Driver Name: gearaspiwdm.sys
    File Location: c:\windows\system32\drivers
    File Description: CDRom Class Filter Driver
    File Version: 2.0.4.3 [2.0.4.3]
    Product Name: GEAR.wrks
    Product Version: 7.xx [2.0.4.3]
    Company Name: GEAR Software Inc.

    Driver Name: redbook.sys
    File Location: c:\windows\system32\drivers
    File Description: Redbook Audio Filter Driver
    File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180]
    Product Name: Microsoft« Windows« Operating System
    Product Version: 5.1.2600.2180 [5.1.2600.2180]
    Company Name: Microsoft Corporation

    Driver Name: imapi.sys
    File Location: c:\windows\system32\drivers
    File Description: IMAPI Kernel Driver
    File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180]
    Product Name: Microsoft« Windows« Operating System
    Product Version: 5.1.2600.2180 [5.1.2600.2180]
    Company Name: Microsoft Corporation


    That's what I have.

    If this doesn't solve it, I don't know... I'm starting to get worried.

  10. #10
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971
    Last edited by Chewy; 6 Jun 2006 at 11:32 AM

  11. #11
    Junior Member
    Junior Member

    Join Date
    Jun 2006
    Posts
    9

    Default

    Sonic what now?

    Sorry.

  12. #12
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    several companies bought the burn engine from sonic,
    also try roxizap
    http://www.download3k.com/Roxio-Zap/...xizap.exe.html

    roxio>sonic>gear

  13. #13
    Junior Member
    Junior Member

    Join Date
    Jun 2006
    Posts
    9

    Default

    Ok, I ran that and it's uninstalled the GEAR software.

    ----------------------------------------------------
    Filter Driver Load Order http://www.bustrace.com
    ----------------------------------------------------

    Upper Device Filter: redbook
    Device Object: PIONEER DVD-RW DVR-111D
    Lower Device Filter: imapi

    Driver Name: redbook.sys
    File Location: c:\windows\system32\drivers
    File Description: Redbook Audio Filter Driver
    File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180]
    Product Name: Microsoft« Windows« Operating System
    Product Version: 5.1.2600.2180 [5.1.2600.2180]
    Company Name: Microsoft Corporation

    Driver Name: imapi.sys
    File Location: c:\windows\system32\drivers
    File Description: IMAPI Kernel Driver
    File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180]
    Product Name: Microsoft« Windows« Operating System
    Product Version: 5.1.2600.2180 [5.1.2600.2180]
    Company Name: Microsoft Corporation


    Is it safe to try a burn now, or do I need to install some Roxio software? I don't want to screw anything up.

    Thanks very much.

  14. #14
    Super Moderator
    Chewy's Avatar
    Join Date
    Nov 2003
    Location
    millenium falcon
    Posts
    18,971

    Default

    NO!
    no roxio, that's what screws up nero, and anything else if it can

    Some call it Poxio

    I just call it crap

    8x burn, did you reinstall nero just to be safe?

  15. #15
    Junior Member
    Junior Member

    Join Date
    Jun 2006
    Posts
    9

    Default

    Uninstalled Nero, used the Nero Cleaner tool, reinstalled... same problem still...

    Have slowed down the burn speed, still nothing.

    I also updated my IDE drivers, but it's still failing.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •